五孔支撑纤维膜在MBR运行中的特性研究

实验室自行研发的PVDF/PMMA/TPU共混体系的五孔支撑膜具有高强度耐冲击的特点,在一定程度上改善了传统中空纤维膜的断丝情况。将选择典型的、具有代表性的MBR工艺流程,采用自主研发的五孔膜制成帘式组件,用于处理经水解酸化后的印染废水。实验讨论了水力停留时间,曝气强度和污泥浓度对于出水水质的影响,最后确定最优的操作条件为:MBR的水力停留时间为20 h,曝气强度为2.45 m/m.h,污泥浓度为4 500 mg/L。     

液体危化品在码头装卸过程中的静电危害及对策

介绍了液体危化品的特点,对装卸船作业过程中静电产生的途径及主要危害进行了分析,并提出了相应的防范对策.     

双区静电除尘器的数值模拟研究

采用数模拟的方法研究了双区静电除尘器内流场分布、颗粒荷电及颗粒运动等难以直接测量的物理过程,构建了双区静电除尘过程完整的数值模型.采用泊松方程、电流连续性方程和匀强电场方程描述电场,采用N-S方程和雷诺应力标准湍流模型描述流场,采用拉格朗日法描述颗粒运动轨迹.通过截面风速与颗粒去除率的模拟值与实验值的对比,验证了数值模型在模拟内部流场和颗粒运动时的准确性.数值模拟结果表明：双区静电除尘器内部流场分布对入口风速的变化非常敏感;颗粒荷电方式占比由颗粒粒径决定;荷电区内颗粒向极板的趋近过程由流体曳力和电场力共同完成,收尘区内的趋近过程则由电场力主导;入口流速通过改变颗粒前进速度和内部流场形态来影响颗粒运动轨迹.     

接地极雾化电晕放电旋风除尘器的实验研究

静电旋风除尘器的除尘效率高,占地面积小,安装方便,得到了广泛的应用。比较了接地极雾化电晕放电旋风除尘器,静电旋风除尘器和传统旋风除尘器的放电特性、捕集效率、分割粒径、分级效率和对高比电阻的适应能力。研究表明:首先,流量为80 m L/min时,接地极雾化电晕放电旋风除尘器的起晕电压和放电电流均优于静电旋风除尘器;其次,接地极雾化电晕放电旋风除尘器的分割粒径和分级效率都明显优于静电旋风除尘器,而分级效率更是较传统旋风除尘器提高了15%以上。最后,当粉尘的比电阻增大时,接地极雾化电晕放电旋风除尘器的收集效率保持稳定,几乎不随工作时间改变,而静电旋风除尘器的效率则随着工作时间的增加而降低。因此,接地极雾化电晕放电技术更有利于高比电阻粉尘的捕集,应用前景广阔。     

Shifts in microbial community structure and diversity in a MBR combined with worm reactors treating synthetic wastewater

The chemical oxygen demand (COD) and NH₃-N removal, membrane fouling, sludge characteristics and microbial community structure in a membrane bioreactor (MBR) coupled with worm reactors (SSBWR) were evaluated for 210 days. The obtained results were compared to those from a conventional MBR (C-MBR) operated in parallel. The results indicated that the combined MBR (S-MBR) achieved higher COD and NH₃-N removal efficiency, slower increase in membrane fouling, better sludge settleability and higher activities of the related enzymes in the activated sludge. Denaturing gradient gel electrophoresis was used to analyze the microbial community structures in the C-MBR and the S-MBR. The microbial community structure in the S-MBR was more diverse than that in the C-MBR. Additionally, the slow-growing microbes such as Saprospiraceae, Actinomyces, Frankia, Clostridium, Comamonas, Pseudomonas, Dechloromonas and Flavobacterium were enriched in the S-MBR, further accounting for the sludge reduction, membrane fouling alleviation and wastewater treatment.     

Effect of oxide nanoparticles on the morphology and fluidity of phospholipid membranes and the role of hydrogen bonds

Engineered oxide nanoparticles (NPs) are widely applied in insulators, catalyzers, paints, cosmetic products, textiles and semiconductors. Their attachment on cell membrane may lead to cytotoxicity. The effects of Al₂O₃, Fe₂O₃, SiO₂, TiO₂ and ZnO NPs on membrane integrity and fluidity were studied using giant or small unilamellar vesicles in this study. Al₂O₃ and SiO₂ NPs disrupted the oppositely charged membrane, indicating the important role of electrostatic attraction. However, Fe₂O₃, TiO₂ and ZnO NPs did not cause serious membrane disruption as Al₂O₃ and SiO₂ NPs. Membrane fluidity was evaluated by the generalized polarity (GP) values of Laurdan fluorescent emission. SiO₂ NPs induce the membrane gelation of both positively and negatively charged membrane. Al₂O₃ and ZnO NPs induced the gelation of the oppositely charged membrane, but did not cause obvious membrane gelation to the like charged membrane. The phospholipid molecular structural changes after NP exposure were analyzed by Fourier transform infrared (FT-IR) spectroscopy. FT-IR spectra revealed the hydrogen bond formation between NPs and the carbonyl/phosphate groups of phospholipids. Al₂O₃ and SiO₂ NPs showed strongest evidence of hydrogen bonding on their FT-IR spectra. It was consistent with the microscopic observation and fluorescent data that Al₂O₃ and SiO₂ NPs caused more serious membrane disruption and gelation. This study on membrane damage provides further knowledge on the cytotoxicity of nanomaterials and the safety of NP application.     

Biological removal of antiandrogenic activity in gray wastewater and coking wastewater by membrane reactor process

A recombinant human androgen receptor yeast assay was applied to investigate the occurrence of antiandrogens as well as the mechanism for their removal during gray wastewater and coking wastewater treatment. The membrane reactor (MBR) system for gray wastewater treatment could remove 88.0% of antiandrogenic activity exerted by weakly polar extracts and 97.3% of that by moderately strong polar extracts, but only 32.5% of that contributed by strong polar extracts. Biodegradation by microorganisms in the MBR contributed to 95.9% of the total removal. After the treatment, the concentration of antiandrogenic activity in the effluent was still 1.05 μg flutamide equivalence (FEQ)/L, 36.2% of which was due to strong polar extracts. In the anaerobic reactor, anoxic reactor, and membrane reactor system for coking wastewater treatment, the antiandrogenic activity of raw coking wastewater was 78.6 mg FEQ/L, and the effluent of the treatment system had only 0.34 mg FEQ/L. The antiandrogenic activity mainly existed in the medium strong polar and strong polar extracts. Biodegradation by microorganisms contributed to at least 89.2% of the total antiandrogenic activity removal in the system. Biodegradation was the main removal mechanism of antiandrogenic activity in both the wastewater treatment systems.     

利用计算流体动力学(CFD)方法研究电收尘器斜向气流分布

在讨论了电收尘器电场内气流分布对除尘效率影响的基础上,介绍有效降低粉尘返流损失,提高电收尘效率的斜向气流技术,进而利用CFD方法对电场内的气流分布进行数值模拟,给出了在电场内实现斜向气流分布时气流分布板结构调整方法和参数。     

超声波强化膜分离及清洗的研究进展

综述了超声波强化膜分离与膜清洗的机理,国内外超声波强化膜分离与清洗的研究现状以及影响该技术运用的问题所在。现有的研究成果表明:通过低功率超声波辐射处理污染膜可以减缓运行过程中的浓差极化及膜污染,而如何优化操作参数、如何减小超声波对膜体损害是近期的研究重点。     

膜生物反应器技术的研究和应用展望

膜生物反应器是将膜分离技术与生物上结合而开发的新型系统，该文就膜生物反应器的特征、研究现状、不同形式反应器的技术参数与处理效果等。进行了综述、由于膜生物反应器具有明显的优点，故愈来愈受到人们的重视、成为研究的热点之一。膜生物反应器的研究和范围不断拓宽，有的已进入污水处理实用阶段，建议今后在开发适合于分离的特种膜方面，在组件形式，操作条件，清洗方式等对膜通量的影响方面，以及生物作用与膜分离工艺的相互