不同填料载体生物膜对微囊藻毒素的去除效果

利用自行设计的生物膜培养装置,通过对4种不同填料载体进行连续曝气循环培养生物膜,对湖水中的溶解态微囊藻毒素(MCs)的去除作用进行了研究。结果表明,填料载体上生物膜从形成到稳定大约需要3周;生物膜形成后对MCs的去除效率由高到低的顺序是:颗粒活性炭柱>多密孔球型滤料柱>塑料悬浮填料柱>陶瓷滤球柱。在实验水质条件下,当水力停留时间(HRT)=5 h,进水MCs浓度为21.5～47.25μg/L时,颗粒活性炭、多密孔球型滤料柱对MCs的去除率最高可达100%,塑料悬浮填料柱对MC-LR和MC-RR的去除率分别为70%和88%。当HRT=2.5 h时,塑料悬浮填料柱对MC-RR的去除率为MC-LR的2倍。生物膜对MCs的降解效果随温度(5～20℃)和溶解氧的升高而增加。塑料悬浮填料作为合适的生物膜挂膜填料载体对水源水的生物预处理具有良好的应用前景。     

航空装备腐蚀维护维修新材料研究进展

针对海洋环境下服役航空装备极易发生腐蚀的问题,介绍了清洗剂、去腐蚀产物膏、缓蚀剂等腐蚀维护维修新材料的研究进展,包括功能、分类、技术指标等。清洗剂用于航空装备的日常清洗、维护以及维修,去除油污等污染物,防止腐蚀;去腐蚀产物膏用于外场航空装备腐蚀产物的原位去除;缓蚀剂用于在不能对现役航空装备的防护体系进行大幅改动的情况下,针对海洋环境下航空装备的防腐蚀需求,对航空装备进行附加防护或临时防护。综合运用腐蚀维护维修新材料进行航空装备的腐蚀防护,可以预防和减少腐蚀的发生,及时对腐蚀部位进行修复,保障航空装备的使用性能和战斗力。     

生物膜生态浮床对城市尾水净化特征分析

为探究生物膜对城市尾水的净化特征,通过采用联合生物膜生态浮床技术,考察生物膜长度、水力停留时间(HRT)及生物膜覆盖面积对含氮尾水的净化特征.结果表明,生物膜为1/2水深长度时,NH₄⁺-N、NO₃^--N和TN的去除率分别可达到90. 82%、62. 7%和81. 96%,氮去除率较高,而生物膜长度为整个河道水深时,NH₄⁺-N的去除率最高只有22. 07%,NO₃^--N和TN的浓度变化不明显.在HRT为6 d时,NH₄⁺-N和TN的去除率最高分别可达到82. 01%和62. 88%,最低分别为55. 24%和46. 82%;当HRT为12 d时,NH₄⁺-N和TN的去除率最高分别可达81. 4%和79. 93%,但最低分别达到了8. 73%和17. 23%,对比发现,HRT为6 d时氮的去除效率较高且稳定.在生物膜覆盖面积为...     

垃圾场渗出污水厌氧处理的可行性研究

采用血清瓶静态试验法研究了垃圾渗出污水的厌氧处理的可行性。试验表明:垃圾渗出污水对厌氧发酵微生物无抑制作用,有良好的厌氧降解性,产气率为0.321/g·COD,污水中的大部份有机物都能被厌氧消化,COD_cr去除率为78.2%,发酵过程中还能获得能源——沼气。具有良好的应用前景。     

水葫芦压滤脱水与鲜汁强化除磷工艺

就地对水葫芦进行粉碎压滤能有效减少质量和体积,降低处置难度,减少运输成本。针对水葫芦鲜渣含水率高,鲜汁污染物浓度高的问题,研究不同压滤时间、压力和调理剂的添加对压滤后鲜渣的含水率的影响;同时采用化学混凝法研究不同混凝剂、pH和混凝时间以及CaO的添加对鲜汁中COD和TP的去除效果的影响。结果表明：鲜渣含水率随着压滤压力、时间的增加而降低,8 MPa压力条件下鲜渣含水率为66.35%,添加鲜货质量10%的木屑和CaO能使含水率降为46.17%和40.21%,加快鲜渣脱水速度;FeCl3、Al2(SO4)3和PAC等3种混凝剂均能有效去除鲜汁中COD和TP,去除率分别可达80%以上和85%以上,进一步添加CaO能强化TP的去除效果,去除率可达96%以上;水葫芦压滤脱水和鲜汁预处理工艺为水葫芦处置提供了一种新的途径。     

典型南方水源溶解性有机物荧光特性变化与去除

于2014年4-9月,研究我国一典型南方水源溶解性有机物(DOM)的荧光特性变化与去除情况,同时分析了DOM荧光组分与三氯乙醛生成势(CHFP)的相关性。结果表明,该水源DOM主要以芳香性蛋白质类物质组成,溶解性微生物代谢产物类物质、富里酸类物质和腐殖酸类物质含量逐渐增加;5个荧光区域的积分体积(ΦⅠ,n、ΦⅡ,n、ΦⅢ,n、ΦⅣ,n和ΦⅤ,n)所占总体积(ΦT,n)平均比例依次为:13.55%、27.53%、25.00%、16.02%和17.91%;原水DOM的CHFP范围为27.06~81.20μg/L,平均值为46.60μg/L,三氯乙醛(CH)前体物含量与水体中溶解性微生物代谢产物类物质相关性最好;与常规处理工艺相比,O3/BAC深度处理工艺对于溶解性微生物代谢产物类物质的去除率大幅提高,更有利于CH的控制。     

污水除磷技术的研究与进展

详细介绍了污水除磷的迫切性及传统的污水除磷工艺原理与特点，阐述了污水除磷技术的最新发展动向。     

Biosorption of Cr(VI) using low cost sorbents

Waste products from industrial operations, such as yohimbe bark, grape stalks, cork and olive stones were investigated for the removal of Cr(VI) from aqueous solutions. Equilibrium batch experiments at room temperature were performed. Metal uptake showed a pH-dependent profile and optimum uptake at initial pH between 2.0–3.0. Slight influence of NaCl on metal uptake was observed. The sorption data fitted well to the Langmuir model within the concentration range studied. Grape stalks proved to be the most efficient sorbent followed by yohimbe bark, cork and olive stones. N. Fiol is the recipient of the 2002 ACE Environmental Chemistry Award     

A Biosurfactant-Enhanced Soil Flushing for the Removal of Phenanthrene and Diesel in Sand

In order to examine the potential of biosurfactants in soil remediation, and to investigate the effects of several operating conditions, such as flow rate, biosurfactant concentration and surfactant type, biosurfactant-enhanced soil flushing was conducted. In the biosurfactant-enhanced soil flushing process, the removal efficiency increased as the flow rate decreased. Rhamnolipid showed no effect on the removal efficiency of phenanthrene and diesel from sand in the concentration range 0.3-0.5%. However, rhamnolipid showed higher efficiencies for the removal of phenanthrene and diesel from sand than Tween 80. Based on total recovery, following an equivalent pore volume flush, it was more difficult to remove diesel than phenanthrene. In order to obtain the specific removal efficiency, more pore volumes of surfactant solution may be required in field applications. Under optimum conditions, the biosurfactant removed as much as 70% of the phenanthrene and 60% of the diesel in the sand. These results indicate that the use of biosurfactants in the flushing process is favorable, not only with respect to the environment, but also on removal efficiencies.     

Management of basiphilous dune slack communities in relation to carbonate accumulation and hydrological conditions

In dune slacks in The Netherlands, a decline of rare mesotrophic basiphilous plant species and their plant communities has been observed in combination with an increase of more productive systems with common, taller acidophilous plant species. This has been attributed to both natural and anthropogenic changes. In a humid climate with a precipitation surplus, as in The Netherlands, the calcium carbonate content of a calcareous soil increases with depth. However, soils in coastal dune slacks, may have a higher carbonate content in the topsoil horizon than in the underlying layers. Carbonates which buffer the pH can prolong the presence of mesotrophic basiphilous plant communities which are of high conservation value. To explain the occurrence of calcareous surface horizons in dune slacks, hydrological and micromorphological analyses were carried out in three dune slacks. Two slacks are situated on the Wadden Sea islands in the northern part of The Netherlands; one on Schiermonnikoog and one on Texel. The third slack is situated in the dunes on the island of Goeree in the southwestern part of The Netherlands. In all three slacks, carbonate occurs as mollusc and gastropod fragments (silt- or sand-sized) and as micritic nodules in the topsoil layer, due to aeolian deposition and sedimentation by water.In situ carbonate accumulation (calcitans and calcareous crusts) due to CO₂ release in inundated and/or capillary rise of calcareous groundwater near, or at the soil surface. Accumulation of carbonate also occurs as a result of biological activity by algae in the topsoil of the Goeree site. In general, hydrological processes maintaining high levels of calcareous groundwater are a prerequisite for the maintenance of high carbonate levels in topsoils. Such levels are necessary for the conservation and management of basiphilous pioneer vegetation.