Effects of release pressure on the transportation characteristics in pipeline and the diffusion behaviors in enclosure space of typical gas extinguishing agent

Reducing the release pressure of fire extinguishing systems can decrease potential safety hazards in large transport airplanes. To explore whether reducing the release pressure can achieve the release effect required by the airworthiness standards or not, the transportation characteristics in the pipeline and diffusion behaviors in the enclosure space of a typical fire extinguishing agent (Halon 1301) were investigated under five release pressures in the present study. The effects of the release pressure on the degree of superheat, injection duration, jet structure, and concentration distribution of Halon 1301 were analyzed. The results show that both of the degree of superheat and the injection duration decrease with an increase in the release pressure. The supplement of bubble expansion in the fire extinguishing agent can slow down the pressure decrease in the vessel. Both of the maximum and mean values of the pipeline differential pressure increase with an increase in release pressure. The maximum value of the jet angle decreases linearly with the increase in release pressure, and the jet deflects upward owing to the effects of buoyancy. The maximum concentration value decreases with an increase in the distance from the nozzle. The maximum concentration values in the near field from the nozzle increase with an increase in the release pressure. Under five release pressures, the concentration and holding time (duration above 6% volume concentration) of Halon 1301 on the centerline of the jet meet the requirements of airworthiness provisions.     

PVC电缆火灾早期特征气体的组成分析和传感器探测

利用气体传感器对电缆绝缘过热释放的气体进行监测有望实现电气火灾早期预警,目前该技术的发展由于特征气体未得到确认而受到限制。分析了聚氯乙烯(PVC)电缆绝缘层在不同温度下释放的气体组成,并对其主要成分进行传感器测试。TG-IR和GC-MS分析表明PVC电缆绝缘层在200℃前已出现微小失重,释放出以邻苯二甲酸二辛酯(DOP)等塑化剂为主的气体。气敏测试中,商用半导体气体传感器对DOP和电缆蒸气产生较好、相似的响应性能。因此,DOP可以作为PVC电缆火灾早期的特征气体。     

气相色谱法测定二硫化碳

本文使用极性色谱固定相，建立了顶空／ＧＣ／ＥＣＤ测定水中ＣＳ２的方法。该方法是最低检出限为５．５μｇ／ｌ，回收率１０３％，相对误差小于２％，相对标准偏差小于７％。具有很高的灵敏度、准确度和精密度，而且操作简便快速。     

湿式煤气柜施工安全措施的制订

针对正在运行的湿式煤气柜防火间距不够的位置动火建造大10倍的湿式煤气柜的实际情况,采取现场调查、安全系统分析,制订切实可行的措施,顺利完成施工任务。     

气相色谱法测定大气中烯烃的研究

采用硅胶－ＡｇＮＯ３富集样品,热解吸进样,气相色谱法分析大气中的烃一,富集过程在常温下进行。当富集样品０．１Ｌ时,乙烯,丙烯,丁二烯的最小检有度分别为０．０００６ｍｇ／ｍ＾３,０．００１ｍｇ／ｍ＾３、０．００４ｍｇ／ｍ＾３,相对标准偏差小于６％,加标回收率９７％－１０９％。     

粉煤灰改性吸附材料处理沥青烟气

分析了粉煤灰改性后的物质基础 ,采用吸附法 ,利用改性粉煤灰作为吸附剂对沥青烟气进行处理 ,通过实验研究得到一定的运行参数 ,为沥青烟气的处理提供了理论依据     

碘酸钾氧化甲基绿褪色光度法测定痕量锡

研究了稀磷酸介质中痕量锡催化碘酸钾氧气甲基绿的褪色反应及动力学条件，建立了高灵敏度测定痕量锡的新催化光度法．方法的灵敏度为２．４×１０－１２ｇ／ｍＬ，线性范围为０～０．１２μｇ／Ｌ．用于人发、水样及矿石中痕量锡的测定，结果满意．     

内电解法预处理甲基氯化物生产废水的研究

用内电解法预处理有机磷农药中间体甲基氯化物生产废水，结果表明是可行的，废水CODcr，有机磷，硫化物的去除率分别达到62.43%，60.62%，76.37%，出水的BOD5／CODcr由0.107上升至0.302，为后续的生化处理创造了良好的条件。实验确定的操作条件为铁碳比铁碳比2、废水pH值5.5,反应温度＞50℃，停留时间＞7h，CaO用量200mg/L。     

固相微萃取气相色谱法测定水样中的苯胺、吡啶

应用PDMS/DVB固相微萃取探头,结合GC/FID测定水中的苯胺、吡啶.优化了萃取温度、萃取平衡时间、pH等条件.该方法对苯胺和吡啶的检测限分别为0.050、0.065 mg/L,相对标准偏差6.44%～8.67%,具有快速、准确和方便等优点.     

蜂窝断面内循环三相生物流化床内流动状况的数值模拟

根据蜂窝断面内循环三相生物流化床内混合液的连续性方程、动量方程和能量方程,利用Fluent软件对反应器内的流动状况进行了数值模拟.采用Fluent的前处理软件Gambit完成流化床的三维模型,利用Fluent主程序解析计算,并利用后处理软件实现计算结果的显示.模拟计算结果获得了反应器内静压力、静压差的变化规律,得到了液体循环速度、气含率沿纵向及横断面的分布.