沸石负载Cu2O光催化剂降解甲基橙

采用化学沉积法,以CuSO4·5H2O和Na2SO3为原料,以人造沸石为载体,在HAC-NaAC缓冲溶液中制备了沸石-Cu2O复合型光催化剂。在仿日光光源照射下,分别从降解时间、甲基橙初始浓度及初始pH、降解温度等不同方面考察了对复合光催化剂降解甲基橙的影响。结果表明,当甲基橙初始浓度为25 mg/L、初始pH在7.00~10.00之间,降解温度为40℃,复合型光催化剂对甲基橙的降解效果最好;样品重复性使用实验表明,沸石-Cu2O复合光催化剂在可见光区具有良好的光催化活性和稳定性;离子干扰实验证明,Cl-浓度控制在1.2 g/L之内时对甲基橙降解效果影响较小。     

植物作为反硝化碳源

研究得到一种新型的筛选反硝化碳源的方法:可以通过比较材料浸出液的C/N值,筛选出有效的反硝化碳源;对芦苇秸秆、梧桐黄叶、梧桐绿叶、橘树叶、玉米秸秆和玉米芯6种材料浸出液的C/N值进行了研究,其中当以叶片作为反硝化固相碳源时,应该选取新鲜叶片作为研究对象。橘树叶和玉米芯均属于良好的反硝化碳源。以驯化后的河泥作为反硝化污泥,可以利用橘树叶或者玉米芯作为反硝化固相碳源,进行持续脱氮除磷反应,其中橘树叶脱氮效果强于玉米芯,而玉米芯除磷能力强于橘树叶。扫描电镜实验表明,橘树叶和玉米芯均适合作为生物膜载体。     

宁波地区海产品中汞污染现状研究

采用冷原子吸收（荧光）法测定了宁波不同地区的各种海产品中总汞和甲基汞含量，总体属轻度及中等污染水平，工业轻发达地区的海产品内总汞和甲基汞的含量较高，不同种类海产品因食性不同，在食物链中所处位置不同，表现为贝壳类＞肉食性类＞杂食性类＞植食性类＞藻类和水草，无鳞鱼类＞有鳞鱼类；海产品中不同部分污染水平表现为内脏＞头部＞肌肉；海水＜底泥＜海产品。除个别样品接近国家标准外，其余都符合我国食品卫生标准。     

石墨烯复合活性碳纤维气体扩散电极对甲基橙的降解性能

采用超声-浸渍法制备石墨烯(GO)复合活性碳纤维(ACF)气体扩散电极,对其微观形貌、表面元素及表面官能团等进行表征,通过甲基橙批量降解处理实验阐述阴极双氧水产生性能与机理。结果表明,制备条件GO与聚四氟乙烯分散液(PTFE)质量比为1:4、GO浆液中无水乙醇添加量100 mL、煅烧温度360 ℃、煅烧时间10 min得到的电极性能最优,GO/ACF较ACF在45 min电催化反应甲基橙降解率提升了21.11%,双氧水最终的质量浓度提高了4.65倍,GO/ACF对甲基橙的最终降解率为100.0%,扫描电子显微镜微观形貌表征结果表明,石墨烯可均匀负载于活性碳纤维表面,X-射线光电子能谱、傅里叶变幻红外光谱仪、循环伏安及电化学阻抗测试结果表明,石墨烯复合增加了电极表面C＝O官能团含量,电极电阻减小了40.06%,有利于产生H₂O₂。对初始电压、电解质浓度影响降解因素进行了优化,使用10次后GO/ACF对甲基橙降解率仍保持在100.0%、甲基橙废水COD去除率仅下降了4.45%,表明GO/ACF具有较高循环稳定性。以上研究结果可为印染废水电催化高效脱色处理与有机污染物氧化降解提供理论依据与技术借鉴。     

磁性活性炭催化臭氧氧化降解水中甲基橙

通过浸渍法制备了钕铁硼磁性活性炭(Nd Fe B/AC),采用SEM和VSM技术对其进行了表征,并将其作为非均相催化剂用于臭氧氧化降解水中甲基橙(MO)。表征结果显示:Nd Fe B/AC具有硬磁特性;当m(Nd Fe B)∶m(AC)=1∶2时,其比饱和磁化强度和比剩余磁化强度分别为15.9 A·m2/kg和6.0 A·m2/kg,矫顽力可达104.5k A/m。实验结果表明:在Nd Fe B/AC投加量为3.0 g/L、初始溶液p H为5.0、初始MO质量浓度为20 mg/L、臭氧质量浓度为15.0 mg/L、室温的条件下反应40 min,MO降解率达93.9%,显著优于投加AC的64.4%;AC和Nd Fe B/AC催化臭氧氧化降解MO的反应过程均遵循一级动力学规律,且Nd Fe B/AC的反应速率常数为AC的近3倍。     

Cu2O-g-C3N4异质结催化剂光催化降解甲基橙

采用水热还原法和高温煅烧法将Cu₂O生长到石墨型氮化碳（g-C₃N₄）表面,制得Cu₂O-g-C₃N₄异质结复合光催化剂。通过XRD、XPS、SEM、TEM、DRS、PL、BET等技术对催化剂进行了表征,研究了Cu₂O-g-C₃N₄降解甲基橙的光催化性能及主要活性物种。实验和表征结果表明： Cu₂O与g-C₃N₄面面接触,两相间化学作用强烈;Cu₂O-g-C₃N₄催化剂能有效利用太阳光,电子-空穴得到有效分离;当n（Cu₂O）∶n（g-C₃N₄）=5∶1时,Cu₂O-g-C₃N₄催化剂的活性最佳,在可见光下反应30 min时,甲基橙降解率达84.1%;Cu₂O-g-C₃N₄具有较好的活性稳定性,重复使用6次,甲基橙降解率降至64.7%;电子-空穴是Cu₂O-g-C₃N₄光催化降解甲基橙的主要活性物种。     

微波混凝技术处理甲基橙模拟废水研究

采用微波混凝技术处理甲基橙模拟偶氮染料废水,对比Fe2(SO4)3、AlCl3、CaCl2、PAC四种混凝剂在有无微波作用条件下,对甲基橙模拟废水的色度去除率效果,表明Fe2(SO4)3的效果最佳,可提高21.4%.重点考察了微波强化混凝剂Fe2(SO4)3,在不同因素,如微波功率、微波辐射时间、pH值、Fe2(SO4...     

Removal of Methyl Violet from aqueous solutions using poly （acrylic acid.co-acrylamide）/attapulgite composite

The adsorption of Methyl Violet (MV) cationic dye from aqueous solution was carried out by using crosslinked poly (acrylic acid-co-acrylamide)/attapulgite (Poly(AA-co-AM)/ATP) composite as adsorbent. The factors influencing adsorption capacity of the composite such as pH, concentration of the dye, temperature, contact time, adsorbent dosage, ionic strength and surfactant were systematically investigated. The equilibrium data fitted very well to the Langmuir isotherm and the maximum adsorption capacity reached 1194 mg/g at 30°C. The thermodynamic parameters including G0, △H0 and △S 0 for the adsorption processes of MV on the composite were also calculated, and the negative △H0 and △G0 confirmed that the adsorption process was exothermic and spontaneous. The kinetic studies showed that the adsorption process was consistent with the pseudo second-order kinetic model and the desorption studies revealed that the regeneration of the composite adsorbent can be easily achieved.     

g-C3N4/Bi2S3复合物的制备及可见光催化降解MO

采用简单溶剂热方法成功合成可见光催化剂g-C_3N_4/Bi_2S_3.合理地利用X射线衍射(XRD)、傅立叶红外光谱分析仪(FTIR)、场发射扫描电子显微镜(FESEM)、透射电子显微镜(TEM、HRTEM)、紫外可见漫反射光谱(UV-vis DRS)等表征手段对合成的样品进行了表征.与纯g-C_3N_4和Bi_2S_3相比,g-C_3N_4/Bi_2S_3复合物对甲基橙(MO)的可见光催化降解具有更高的降解效率.根据能带分析结果,电子-空穴对的有效分离增强了光催化效率.此外,提出了g-C_3N_4/Bi_2S_3对MO的光催化降解过程以阐明降解机制.提供了一种经济简单并易于规模化扩大开发可见光响应催化剂的方法,并在废水处理中具有潜在的应用价值.     

Decolorization of Methyl Orange by a new clay-supported nanoscale zero-valent iron: Synergetic effect, efficiency optimization and mechanism

In this study, a novel nanoscale zero-valent iron (nZVI) composite material was successfully synthesized using a low-cost natural clay, “Hangjin 2^# clay” (HJ clay) as the support and tested for the decolorization of the azo dye Methyl Orange (MO) in aqueous solution by nZVI particles. According to the characterization and MO decolorization experiments, the sample with 5:1 HJ clay-supported nZVI (HJ/nZVI) mass ratio (HJ-nZVI5) showed the best dispersion and reactivity and the highest MO decolorization efficiency. With the same equivalent Fe⁰ dosage, the HJ-nZVI1 and HJ-nZVI5 samples demonstrated a synergetic effect for the decolorization of MO: their decolorization efficiencies were much higher than that achieved by physical mixing of HJ clay and nZVIs, or the sum of HJ clay and nZVIs alone. The synergetic effect was primarily due to the improved dispersion and more effective utilization of the nZVI particles on/in the composite materials. Higher decolorization efficiency of MO was obtained at larger HJ-nZVI dosage, higher temperature and under N₂ atmosphere, while the MO initial concentration and pH were negatively correlated to the efficiency. HJ clay not only works as a carrier for nZVI nanoparticles, but also contributes to the decolorization through an “adsorption-enhanced reduction” mechanism. The high efficiency of HJ-nZVI for decontamination gives it great potential for use in a variety of remediation applications.