Mesoporous carbon adsorbents from melamine–formaldehyde resin using nanocasting technique for CO2 adsorption

Mesoporous carbon adsorbents, having high nitrogen content, were synthesized via nanocasting technique with melamine–formaldehyde resin as precursor and mesoporous silica as template. A series of adsorbents were prepared by varying the carbonization temperature from 400 to 700°C. Adsorbents were characterized thoroughly by nitrogen sorption, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), elemental (CHN) analysis, Fourier transform infrared (FTIR) spectroscopy and Boehm titration. Carbonization temperature controlled the properties of the synthesized adsorbents ranging from surface area to their nitrogen content, which play major role in their application as adsorbents for CO₂ capture. The nanostructure of these materials was confirmed by XRD and TEM. Their nitrogen content decreased with an increase in carbonization temperature while other properties like surface area, pore volume, thermal stability and surface basicity increased with the carbonization temperature. These materials were evaluated for CO₂ adsorption by fixed-bed column adsorption experiments. Adsorbent synthesized at 700°C was found to have the highest surface area and surface basicity along with maximum CO₂ adsorption capacity among the synthesized adsorbents. Breakthrough time and CO₂ equilibrium adsorption capacity were investigated from the breakthrough curves and were found to decrease with increase in adsorption temperature. Adsorption process for carbon adsorbent–CO₂ system was found to be reversible with stable adsorption capacity over four consecutive adsorption–desorption cycles. From three isotherm models used to analyze the equilibrium data, Temkin isotherm model presented a nearly perfect fit implying the heterogeneous adsorbent surface.     

铁柱撑累托石的制备及其对活性艳蓝的降解

以天然粘土矿物累托石为载体、以铁盐作交联剂,利用水溶液插层方法制备了铁/累托石复合物。采用FT-IR和XRD两种表征方法对铁/累托石复合物进行了表征,分析了复合物的结构变化和层间间距变化,并探讨了复合物制备条件以及反应过程中溶液初始浓度、溶液初始pH、复合物投加量和H2O2浓度因素对催化降解活性艳蓝的影响。研究表明:铁聚合物插入到累托石的层间结构中,扩大了累托石的层间距;当Na+/Fe3+比值为0.5,Fe3+/累托石比值为10 mmol/g,p H为3左右,催化剂用量为0.5 g/L时,H2O2浓度为100 mg/L时,活性艳蓝的去除率达到90%以上。实验表明,铁柱撑累托石/UV/Fenton工艺对活性艳蓝具有良好的降解效果。     

Genotoxic effects of microcystins mediated by nitric oxide and mitochondria

<正>Microcystins are potent toxins,produced naturally by cyanobacteria(blue green algae),and they present significant threats to human and animal health(WHO,1999;Chorus,2001;Carmichael et al.,2001;Falconer,2005;IARC,2010;Ma et al.,2015).These cyclic peptides consist of five common core amino     

生物活性炭吸附石化废水有机污染物实验研究

生物活性炭吸附石化二级废水有机污染物实验主要包括生物活性炭挂膜实验和生物活性碳影响因素实验。在实验中考察了水力负荷和活性炭滤层厚度两因素对有机污染物吸附作用。结果表明:在45 d左右挂膜基本成功,最佳水力负荷为0.25~0.75m3/(m2·h),活性炭滤层最佳厚度为90cm。     

以“蓝天工程”治理沈阳城市雾霾污染的对策建议

分析了我国城市雾霾的成因,阐述了沈阳市能源利用及大气污染控制现存的主要问题,并提出了建设区域一体化的高效供热工程、建设气化沈阳工程、全面优化城市工业布局、推进城市抑尘工程、推进城市绿色交通工程、实施大气监控预警工程、实施雾霾污染控制工程等治理沈阳城市雾霾污染的对策建议。     

改性小麦秸秆吸附Cu2+的动力学和热力学研究

本研究采用ZnCl2作为活化剂,用640W功率的微波照射5min的方法制备改性小麦秸秆。研究了改性小麦秸秆投加量、吸附时间、温度、pH对改性小麦秸秆吸附水溶液中Cu2+的影响,以及对其等温吸附特征、动力学和热力学进行了研究。试验结果表明:投加量为0.1g,pH为6,改性小麦秸秆对Cu2+有较好的吸附效果,吸附在10h后达到平衡。改性小麦秸秆对Cu2+吸附较好地符合Langmuir、Freundlich温吸附模型和准二级动力学方程,吸附过程中△G0,说明属于自发反应。     

洱海弥苴河河口沉积物磷吸附特性研究

以洱海主要入湖河流弥苴河的河口表层沉积物为实验对象,研究其磷吸附特性。研究结果表明,Elovich方程对沉积物吸磷动力学拟合较好,考虑沉积物原有吸附态磷的修正Langmuir方程能较好描述弥苴河河口表层沉积物等温吸附特性。弥苴河河口沉积物存在释磷风险,沉积物间隙水正磷浓度远高于临界磷平衡浓度。     

粉煤灰对阴离子水溶性混合染料的吸附动力学

以燃煤废弃物粉煤灰作为吸附剂,对活性红23与活性蓝4、活性黄4、酸性黑1、酸性蓝193的混合染料溶液进行吸附性能研究.结果表明,在不同的混合体系中,活性红23的脱色率基本保持在60%~70%;体系中酸性染料的脱色率均超过90%;活性蓝4的脱色率高达85%;活性黄4的脱色率仅为50%.准二级吸附动力学能够更好地描述粉煤灰对水溶性混合染料的吸附过程.染料在溶液中的外扩散系数均为10-4cm·s-1数量级,染料在粉煤灰颗粒的内扩散系数为10-8cm2·s-1数量级.根据BN数,水溶性染料在粉煤灰上的竞争吸附是外扩散控制的吸附过程.     

铁镧复合氧化物纳米吸附剂的制备、表征及As（Ⅲ）吸附性能研究

本研究采用共沉淀法制备了一种新型铁镧复合氧化物吸附剂(Fe-La),并对其表面特性及As(Ⅲ)吸附行为进行了系统研究.扫描电镜(SEM)和透射电镜(TEM)结果表明,铁镧复合氧化物具有纳米结构,初级粒子粒径范围为20~200 nm.X-射线衍射仪(XRD)表征结果表明,铁镧复合氧化物具有类似氢氧化镧的晶型结构.N2吸附BET法结果表明,铁镧复合氧化物的比表面积为99.3 m2·g-1.盐加入法测得吸附剂的等电点为7.8.As(Ⅲ)吸附实验结果分析表明,铁镧复合氧化物对As(Ⅲ)具有良好的吸附效果,最大吸附量(pH 7.0)为58.2 mg·g-1,Langmuir吸附等温线可较好地拟合铁镧复合氧化物对溶液中As(Ⅲ)的吸附(R2=0.95);吸附速率较快,240 min内可完成吸附容量的80%,Elovich模型能较好地描述吸附过程(R2=0.97);溶液pH对铁镧复合氧化物吸附As(Ⅲ)的影响较为明显;共存阴离子对吸附影响的大小顺序为SO2-4相似文献