Mg/Al双金属氧化物对As(V)吸附性能的研究

研究了以镁铝水滑石为原料制备的Mg/Al双金属氧化物对溶液中As(V)的吸附作用及其影响因素.结果表明：Mg/Al双金属氧化物对As(V)具有较强的吸附能力,吸附规律符合Langmuir等温吸附方程,根据计算所得的理论最大吸附量为51.02 mg·g-1,与实验得出的最大吸附量50.53 mg·g-1基本一致;运用3种...     

粗粒子气溶胶远距离输送造成华南严重空气污染的分析

2009年4月末,发生了一次罕见的粗粒子气溶胶远距离输送造成华南地区出现严重的空气污染事件,其特征主要是气溶胶质量浓度超标,而能见度没有明显恶化,对这次空气污染事件进行分析的结果表明.在过程中,粗细粒子质量比(PM2.5/PM10)有明显的3次下降,最低达到0.3,即PM2.5仅占PM10的30%,这与珠江三角洲地区通常以细粒子为主的污染特征有很大不同,反映了外来粗粒子的侵入特征.长江流域浮尘天气的沙尘粒子变性后,长距离输送污染物叠加本地污染物,造成这次严重空气污染事件.     

A numerical study of summer ozone concentration over the Kanto area of Japan using the MM5/CMAQ model

We assessed the ability of the MM5/CMAQ model to predict ozone (O3) air quality over the Kanto area and to investigate the factors that a ect simulation of O3. We find that the coupled MM5/CMAQ model is a useful tool for the analysis of urban environmental problems. The simulation results were compared with observational data and were found to accurately replicate most of the important observed characteristics. The initial and boundary conditions were found to have a significant e ect on simulated O3 concentrations. The results show that on hot and dry days with high O3 concentration, the CMAQ model provides a poor simulation of O3 maxima when using initial and boundary conditions derived from the CMAQ default data. The simulation of peak O3 concentrations is improved with the JCAP initial and boundary conditions. On mild days, the default CMAQ initial and boundary conditions provide a more realistic simulation. Meteorological conditions also have a strong impact on the simulated distribution and accumulation of O3 concentrations in this area. Low O3 concentrations are simulated during mild weather conditions, and high concentrations are predicted during hot and dry weather. By investigating the e ects of di erent meteorological conditions on each model process, we find that advection and di usion di er the most between the two meteorological regimes. Thus, di erences in the winds that govern the transport of O3 and its precursors are likely the most important meteorological drivers of ozone concentration over the central Kanto area.     

Effect of manufacturing methods of AgCl/Al2O3 catalyst on selective catalytic reduction of NOx

The AgCl/Al2O3 catalyst has potential for use in the selective catalytic reduction (SCR) of NOx. A compound hydrocarbon, following oxygenation is used as a type of reducing agent. In this experiment, the AgCl/Al2O3 catalyst was produced by four different methods, and the differences among their reduction catalysis of NOx were compared. Ethanol was used as a type of reducing agent. X-ray diffraction analysis was performed to study the crystalline structure and scanning electron microscope and transmission electron microscope (TEM) were applied to determine the microindentation. The results indicated that, in the range of 350–400°C, there was no significant difference on the NOx reduction rate; however, there was dispersion at high and low temperature ranges. The size of the AgCl particles was about 20–100 nm.     

Identification of odorous compounds in reclaimed water using FPA combined with sensory GC-MS

Odorous compounds in the influent of a reclaimed water treatment plant (RWTP), consisting of coagulation, sedimentation, continuous micro-filtration (CMF), and chlorination in succession, in a north China city, were identified by combining flavor profile analysis (FPA) with sensory gas chromatograph-mass spectrometry (GC-MS). The sewery/swampy/septic odor with an odor intensity of 6.4 was found to be the major odor group in the RWTP influent, and the existence of well-known odorant including dimethyl disulfide, dimethyl trisulfide, indole and skatole were confirmed using GC-MS. The result of a spiking test showed that the intensity (3.6) of the sewery/swampy/septic odor caused by these four chemicals contributed to over 50% of the odor intensity of the influent. The FPA intensity for sewery/swampy/septic odor in the RWTP effluent was 3.8, showing that the treatment process was not efficient for the removal of odorants, particularly indole and skatole.     

Ti/SnO2-Sb2O5/PbO2阳极电化学氧化降解苯甲酸研究

文章研究了TI/SnO2-Sb2O5/Pbo2在两室电解池中氧化降解苯甲酸的性能,主要考察了电流密度、初始pH值、初始苯甲酸浓度和支持电解质这四个参数对TOC去除效率的影响。实验表明在电流密度为30 mA/cm2,初始苯甲酸浓度为0.5 mmol/L,支持电解质(Na2SO4)为0.1mol/L的条件下,经过6 h反应...     

碳氮比对废水好氧脱氮中含氮气态产物的影响

针对目前人们对好氧脱氮中气态产物认识不清的问题,采用SBR反应器,以人工配制的NO3--N废水为处理对象,对影响好氧脱氮的COD/N进行了深入研究,测定了三种主要含氮气态产物(NO、NO2、N2O),揭示了好氧状态下生物脱氮的途径和机理。通过对COD/N分别为9、12、15、18的系统氮元素的全程跟踪测定,得到系统内各含氮化合物的变化规律。结果表明,三种气体的产生同COD/N有着密切的关系,低C/N会导致NO、NO2和N2O的积累,最多达总脱氮量的9%。研究结果还表明当进水COD/N为15时,既保证了良好的脱氮效果且抑制了NO、NO2、N2O三种有害气体的大量产生。     

STAC有机膨润土的表征及其处理垃圾渗滤液的研究

文章以钙基蒙脱石为原料,经钠化后与十八烷基三甲基氯化铵(又称1831,简称STAC)进行离子交换反应,合成有机膨润土,通过XRD、IR 、SEM等测试仪,对有机膨润土的结构进行了分析,同时利用改性后的STAC有机膨润土对某垃圾填埋场中的渗滤液进行处理,用GC/MS对处理前后垃圾渗滤液中主要有机组分进行了分析,结果表明,...     

不同进水条件对SBR工艺脱氮除磷效能的影响

采用人工配水,研究进水在不同pH值,碳源类型,碳氮比条件下,厌氧/好氧/缺氧(A/O/A)sBR工艺对生物法脱氮除磷效能的影响.结果表明:不同的进水条件对反应器的影响较大,当pH值为7.5,乙酸钠为碳源,碳氮比为1.4时,反应器运行效果最佳,系统对PO43--P,NH4+-N的去除率分别达到97.28%,99.5%.N...     

垃圾焚烧飞灰中二噁英削减技术研究

二噁英(PCDD/Fs)是多氯代二苯并二噁英和多氯代二苯并呋喃的总称,因具有生物蓄积性、高毒性、难降解等特点而备受关注。垃圾焚烧是二噁英的重要来源,而其中超过50%的二噁英以飞灰形式排出。文章综述了热分解法、光降解法、机械化学法、生物降解法等飞灰二噁英毒性削减技术的国内外研究进展,并在此基础上对飞灰二噁英削减技术研究和管理提出了建议。