Detection of tritium sorption on four soil materials

In order to measure groundwater age and design nuclear waste disposal sites, it is important to understand the sorption behavior of tritium on soils. In this study, batch tests were carried out using four soils from China: silty clays from An County and Jiangyou County in Sichuan Province, both of which could be considered candidate sites for Very Low Level Waste disposal; silty sand from Beijing; and loess from Yuci County in Shanxi Province, a typical Chinese loess region. The experimental results indicated that in these soil media, the distribution coefficient of tritium is slightly influenced by adsorption time, water/solid ratio, initial tritium specific activity, pH, and the content of humic and fulvic acids. The average distribution coefficient from all of these influencing factors was about 0.1-0.2 mL/g for the four types of soil samples. This relatively modest sorption of tritium in soils needs to be considered in fate and transport studies of tritium in the environment.     

Plutonium isotopes concentration in seawater and bottom sediment off the Pacific coast of Aomori sea area during 1991-2005

A radioactivity survey was launched in 1991 to determine the background levels of ^239+240Pu in the marine environment off a commercial spent nuclear fuel reprocessing plant before full operation of the facility. Particular attention was focused on the ²⁴⁰Pu/²³⁹Pu atom ratio in seawater and bottom sediment to identify the origins of Pu isotopes. The concentration of ^239+240Pu was almost uniform in surface water, decreasing slowly over time. Conversely, the ^239+240Pu concentration varied markedly in the bottom water and was dependent upon the sampling point, with higher concentrations of ^239+240Pu observed in the bottom water sample at sampling points having greater depth. The ²⁴⁰Pu/²³⁹Pu atom ratio in the seawater and sediment samples was higher than that of global fallout Pu, and comparable with the data in the other sea area around Japan which has likely been affected by close-in fallout Pu originating from the Pacific Proving Grounds. The ²⁴⁰Pu/²³⁹Pu atom ratio in bottom sediment samples decreased with sea depth. The land-originated Pu is not considered as the reason of the increasing ^239+240Pu concentration and also decreasing the ²⁴⁰Pu/²³⁹Pu atom ratio with sea depth, and further study is required to clarify it.     

Cs, Pu concentrations and the Pu/Pu atom ratio in a sediment core from the sub-aqueous delta of Yangtze River estuary

A sediment core collected from the sub-aqueous delta of the Yangtze River estuary was subjected to analyses of ¹³⁷Cs and plutonium (Pu) isotopes. The ¹³⁷Cs was measured using γ-spectrometry at the laboratories at the Nanjing University and Pu isotopes were determined with Accelerator Mass Spectrometry (AMS), measurements made at the Australian National University. The results show considerable structure in the depth concentration profiles of the ¹³⁷Cs and ^239+240Pu. The shape of the vertical ¹³⁷Cs distribution in the sediment core was similar to that of the Pu. The maximum ¹³⁷Cs and ^239+240Pu concentrations were 16.21 ± 0.95 mBq/g and 0.716 ± 0.030 mBq/g, respectively, and appear at same depth. The average ²⁴⁰Pu/²³⁹Pu atom ratio was 0.238 ± 0.007 in the sediment core, slightly higher than the average global fallout value. The changes in the ²⁴⁰Pu/²³⁹Pu atom ratios in the sediment core indicate the presence of at least two different Pu sources, i.e., global fallout and another source, most likely close-in fallout from the Pacific Proving Grounds (PPG) in the Marshall Islands, and suggest the possibility that Pu isotopes are useful as a geochronological tool for coastal sediment studies. The ¹³⁷Cs and ^239+240Pu inventories were estimated to be 7100 ± 1200 Bq/m² and 407 ± 27 Bq/m², respectively. Approximately 40% of the ^239+240Pu inventory originated from the PPG close-in fallout and about 50% has derived from land-origin global fallout transported to the estuary by the river. This study confirms that AMS is a useful tool to measure ²⁴⁰Pu/²³⁹Pu atom ratio and can provide valuable information on sedimentary processes in the coastal environment.     

机动车排放检测和维修制度实施效果分析

实施检测和维修制度是机动车污染控制的重要措施 ,机动车排放检测是检测和维修制度的主要内容 .本研究利用累积分布曲线 ,通过双怠速检测排放限值对各类型高排放车辆的识别率 ,从检测数据、现行标准、上线合格率 3个角度对北京市检测和维修制度的排放限值制定、组织形式和实施效果进行分析 ,提出各受检物排放限值的匹配原则 .     

新型低温Fe/AC脱硫剂的研究

将活性焦担载氧化铁制得Fe/AC脱硫剂用于烟气脱硫,在最经济的烟气脱硫温度窗口(120℃～250℃)显示出高的脱硫活性.考察操作条件对其脱硫活性的影响,并借助EXAFS和TPD表征技术对其内在原因进行探讨.Fe/AC脱硫剂在排烟温度下用于脱硫,其活性明显优于活性焦和纯Fe₂O₃,且载体炭无氧化烧损.Fe/AC吸硫后形成2种含硫物质:H₂SO₄和Fe₂(SO₄)₃,H₂O和O₂的存在可增加Fe/AC对SO₂的吸附硫容.由高比表面活性焦制得的Fe/AC有更高的脱硫活性,这源于活性组分Fe₂O₃在其上良好的分散性.Fe/AC用于脱硫应在适宜空速[(800L/(kg·h)]下操作.     

电解制备聚合铝过程中Alb形态生成条件研究

考察了电解法制备聚合铝过程中AIb的最佳形成条件。AIb的形成与电流密度、极板间距、电解液的温度、铝的浓度以及电解时间等因素有关。在制备AI浓度为2．0mol/L的聚合氯化铝时，最佳的电流密度和极板间距分别为1．1A／dm^2和10mm。由于电化学过程中产生的不均匀的界面pH差值较大而生成较多的AI（OH）4^-作为AIb结构的结晶核心，因此能形成更多的AIb聚合形态。     

不同地域天然伊利石表面酸碱特性的比较

利用电位滴定技术和恒定容量表面络合模式表征不同来源天然伊利石的表面酸碱性质。鉴于固体基质在酸量滴定过程中发生溶解，相应的滴定上清液被视为体系空白。考虑到水解铝、硅酸和伊利石表面活性位之间的表面络合或沉淀反应，提出两种表面质子反应模型。对其中的特例，还考虑了表面离子交换反应。模拟程序的拟合结果显示两种模型对水解伊利石体系的滴定行为均可获得满意的描述。相的的表面固有酸度常数表明样品的酸碱性质之间存在一些共性。     

科研工作中科技情报检索的作用--浅谈应用国际联机情报检索的体会

科技情报检索是科研工作中的重要环节,也是科研成果评价的必要手段.课题研究必须了解国内外发展动态,进行可行性和经济效益分析.本文通过国际联机情报检索的两个应用实例,阐明了情报检索不仅提高了科研工作效率,而且在课题研究的方法、深度和广度、最终结果方面都能得到很大益处.     

聚合氯化铝与有机高分子复合絮凝剂的形态分布研究——AlFerron和~(27)AlNMR相结合

主要研究了Ａｌ－Ｆｅｒｒｏｎ逐时络合比色法和＾２７Ａｌ－ＮＭＲ法应用于聚合铝与有机高分子复合絮凝剂形态分布的测定，结果表明，两种方法分别测定的Ａｌｂ和Ａｌ１３的结果具有一定的相关性；聚合铝与有机高分子复合后其形态分布发生了一定的变化，Ａｌｂ（或Ａｌ１３）的含量有所降低，但仍是优势形态，Ａｌａ（或Ａｌ单）的含量基本保持不变。     

Influence of chlorsulfuron herbicide on size of microbial biomass in the soil

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｕｓｅｏｆｃｈｅｍｉｃａｌｓ,ｉｎｃｌｕｄｉｎｇｐｅｓｔｉｃｉｄｅｓ,ｈａｓｂｅｃｏｍｅａｎｉｎｔｅｇｒａｌａｎｄｅｃｏｎｏｍｉｃａｌｌｙｅｓｓｅｎｔｉａｌｐａｒｔｏｆｍｏｄｅｒｎａｇｒｉｃｕｌｔｕｒｅ.Ｐｅｓｔｉｃｉｄｅ?..