单芯铜线过电流故障电弧熔痕的微观特征研究*

为准确认定电气火灾中过电流故障,模拟4~7倍额定电流（Ie）条件下单芯铜导线过电流故障,利用光学显微镜和扫描电子显微镜（SEM）分析过电流故障电弧熔痕的组织特征,并结合Image-Pro Plus软件测定晶粒直径、周长和面积,探究金相组织的量化判据和变化规律。结果表明:当I＝4Ie时,过电流故障电弧熔痕的金相组织主要为方向性较强的树枝晶;当I＝5Ie,6Ie时,金相组织内树枝晶占比减小,胞状晶占比升高;当I＝7Ie时,方向性较弱的胞状晶占主导。随着电流增加,晶粒的平均直径、周长和面积均呈增长趋势。通过火灾案例分析可知,实验结果与现场的电弧熔痕组织特征基本相符,验证火灾事故原因为过电流故障。     

电气柜疲劳强度校核及结构优化

针对多孔闭孔型发泡硅橡胶D型空心密封条的超弹性特性,通过试验找出了密封条回弹力与压缩量之间的关系,提出了密封条满足IP X5的判别方程式,同时对方程式进行了试验验证,最后对密封条进行了阿累尼乌斯图寿命推算,为变流器柜门IP防护设计提供了重要参考。     

Rainfall Interception Based on Indirect Methods: A Case Study in Temperate Forests in Oaxaca,Mexico

Rainfall interception represents the amount of water trapped in natural cover that is not drained directly to the ground. Intercepted rainfall may evaporate after a rain event, making it one of the main drivers of water balance and hydrologic regionalization. This process can be affected by factors such as climate, altitude, vegetation type, and topography. Here is a simple method of calculating rainfall interception in temperate forests using in Santa Maria Yavesia, Oaxaca, and Mexico as an illustrative study area. We used two rain gauges to measure net precipitation (N_p) under the canopy at each study site and one gauge outside the canopy to obtain gross precipitation (G_p). Throughfall (T_h) was indirectly measured using hemispherical photographs. Rainfall interception was obtained through a combination T_h and G_p and N_p. The mean rainfall interception was 50.6% in the Abies forests, 23%–40% in the coniferous‐mixed forests, and 27.4% in the broad‐leaved forests. We classified rainfall events by intensity to determine the effect of canopy structure and precipitation and found that 75% of the events were weak events, 24% were moderate events, and 1% were strong events. In addition, we found that rainfall interception was lower when the intensity of precipitation was higher. Our method can be replicated in different ecosystems worldwide as a tool for assessing the influence of rainfall interception in terms of ecological services.     

Validation of Bacteroidales-based microbial source tracking markers for pig fecal pollution and their application in two rivers of North China

• Pig feces is the predominant excrement produced by animal husbandry in China. • The PF, Pig-1-Bac^TaqMan, and Pig-2-Bac^TaqMan MST assays showed better performance. • The pig-specific MST assays can contribute to managing the pig fecal pollution. In China, pig feces is the predominant source of excrement produced by animal husbandry. Improper use or direct discharge of pig feces can result in contamination of natural water systems. Microbial source tracking (MST) technology can identify the sources of fecal pollution in environmental water, and contribute to the management of pig fecal pollution by local environmental protection agencies. However, the accuracy of such assays can be context-dependent, and they have not been comprehensively evaluated under Chinese conditions. We aimed to compare the performance of five previously reported pig-specific MST assays (PF, Pig-Bac1^SYBR, Pig-Bac2^SYBR, Pig-1-Bac^TaqMan, and Pig-2-Bac^TaqMan, which are based on Bacteroidales 16S rRNA gene markers) and apply them in two rivers of North China. We collected a total of 173 fecal samples from pigs, cows, goats, chickens, humans, and horses across China. The PF assay optimized in this study showed outstanding qualitative performance and achieved 100% specificity and sensitivity. However, the two SYBR green qPCR assays (Pig-Bac1^SYBR and Pig-Bac2^SYBR) cross-reacted with most non-pig fecal samples. In contrast, both the Pig-1-Bac^TaqMan and Pig-2-Bac^TaqMan assays gave 100% specificity and sensitivity. Of these, the Pig-2-Bac^TaqMan assay showed higher reproducibility. Our results regarding the specificity of these pig-specific MST assays differ from those reported in Thailand, Japan, and America. Using the PF and Pig-2-Bac^TaqMan assays, a field test comparing the levels of pig fecal pollution in rivers near a pig farm before and after comprehensive environmental pollution governance indicated that pig fecal pollution was effectively controlled at this location.     

Taxonomic and functional variations in the microbial community during the upgrade process of a full-scale landfill leachate treatment plant – from conventional to partial nitrification-denitrification

• Upgrade process was investigated in a full-scale landfill leachate treatment plant. • The optimization of DO can technically achieve the shift from CND to PND process. • Nitrosomonas was mainly responsible for ammonium oxidation in PND system. • An obviously enrichment of Thauera was found in the PND process. • Enhanced metabolic potentials on organics was found during the process update. Because of the low access to biodegradable organic substances used for denitrification, the partial nitrification-denitrification process has been considered as a low-cost, sustainable alternative for landfill leachate treatment. In this study, the process upgrade from conventional to partial nitrification-denitrification was comprehensively investigated in a full-scale landfill leachate treatment plant (LLTP). The partial nitrification-denitrification system was successfully achieved through the optimizing dissolved oxygen and the external carbon source, with effluent nitrogen concentrations lower than 150 mg/L. Moreover, the upgrading process facilitated the enrichment of Nitrosomonas (abundance increased from 0.4% to 3.3%), which was also evidenced by increased abundance of amoA/B/C genes carried by Nitrosomonas. Although Nitrospira (accounting for 0.1%–0.6%) was found to stably exist in the reactor tank, considerable nitrite accumulation occurred in the reactor (reaching 98.8 mg/L), indicating high-efficiency of the partial nitrification process. Moreover, the abundance of Thauera, the dominant denitrifying bacteria responsible for nitrite reduction, gradually increased from 0.60% to 5.52% during the upgrade process. This process caused great changes in the microbial community, inducing continuous succession of heterotrophic bacteria accompanied by enhanced metabolic potentials toward organic substances. The results obtained in this study advanced our understanding of the operation of a partial nitrification-denitrification system and provided a technical case for the upgrade of currently existing full-scale LLTPs.     

三峡水库浮游植物群落特征及水体富营养化评价

基于2003—2017年三峡水库浮游植物群落结构、优势种群的变化和2017年水库干支流水质数据,全面分析浮游植物群落结构和演替特征,并运用综合营养状态指数法对水体富营养化程度进行评价。结果表明,三峡水库浮游植物种类丰富,监测期间共鉴定出浮游植物7门62属,细胞密度在7.5×10~4~2.8×10~7cell/L之间变化,Shannon-Wiener多样性指数为1.0~3.0,在α-中污带和β-中污带之间,说明三峡水库水生态环境健康状况相对较好;三峡水库浮游植物季节性演替特征呈硅藻和甲藻向蓝藻和绿藻演替的趋势,年际变化特征分析发现浮游植物密度在2008年175 m实验蓄水后大量增长,且优势藻类由河道型藻类向湖泊型藻类转化。通过监测数据分析,得出三峡水库干流处于中营养状态,支流在春季主要处于轻度富营养状态,秋季支流比春季支流的富营养化程度低,主要处于中营养状态,总氮(total nitrogen,TN)、总磷(total phosphorus,TP)和透明度(transparency,SD)为水质主要影响因子。     

BIM技术在钢结构建筑抗震减灾管理中的应用

为提高钢结构建筑抗震减灾性能,降低建筑坍塌风险,研究BIM技术在钢结构建筑抗震减灾管理中的应用方法是非常必要的.利用BIM技术在钢结构建筑整体建造中的动态建模、可视化、信息共享管理以及抗震减灾性能检测等优势,在建筑抗震减灾管理决策阶段,选出最优方案,针对方案中影响建筑抗震减灾性能风险制定管理策略;在设计阶段,创建三维建...     

深部“三软”高应力软岩巷道卸压耦合支护技术

为解决杨河煤业高应力软岩巷道的支护问题,对杨河煤业深部软沿巷道变形破坏特征及原因进行分析,提出支架-锚杆-围岩卸压耦合支护技术,并结合42轨道下山试验巷道对耦合卸压支护技术参数进行阐述,通过矿压观测结果可知:42轨道下山在采用卸压耦合支护技术后,有效控制了巷道强烈变形。     

井下采空区构筑物漏风实测装置研发及应用

为了实时动态监测采空区构筑物漏风情况,自主研发了一种井下采空区构筑物漏风实测装置。通过现场实测及应用,研究结果表明:风流从工作面上进风口漏入采空区,而采空区中风流一部分通过与工作面之间的漏风流进入工作面下进风口,在下隅角位置附近形成一个涡流区;另一部分风流穿过沿空留巷构筑物进入留巷内,由于采空区的压实程度不同,采空区侧留巷内漏风速度曲线近似呈“L”型下降;通过收集分析留巷内漏风气体,其结果可反映采空区中瓦斯浓度分布情况,为采空区瓦斯治理提供了一种新的监测技术手段,且能有效地降低采空区瓦斯事故发生率,保证矿井的安全生产。     

武汉市一次污染过程的局地流场和边界层结构的数值模拟

利用2013年11月武汉市逐日空气质量资料、地面气象观测资料、NCEP/NCAR再分析资料和L波段雷达探空资料,通过WRF模式模拟空气污染生消过程中的局地气象条件变化,探讨特殊地形条件下边界层结构变化和局地环流在污染物生消过程中的作用和影响。结果表明：（1）武汉地区当背景环流场强的时候,由地形引起的局地流场对污染物扩散的影响就弱,反之当背景环流场弱的时候, 地形对流场影响明显:夜间为山风,白天为谷风。夜间山风与偏西北气流及偏东气流在武汉及周边地区辐合,形成气流汇聚带,在武汉地区形成一个反复污染带,即由地形引起的局地流场对污染物扩散的贡献就大;（2）武汉地区发生空气污染时,地面湿度较高,边界层呈上干下湿状态,其特征为暖而干且有偏东小风,这导致污染物不断堆积和重污染过程的形成。