钝顶螺旋藻突变株FBL的生理特性

利用倍频Ｎｄ：ＹＡＧ激光（λ＝５３２ｎｍ,ｐ＝５００ｍＷ,Ｓ＝１６０ｍＷ／ｃｍ＾２）对钝顶螺旋藻进行诱变处理,辐照１０ｍｉｎ,经分离获得藻丝开矿变成直形的钝顶螺旋突变株ＦＢＬ。对该变株ＦＢＬ的生长特性、藻多糖、氨基酸、β－胡萝卜素、叶绿素ａ等生化组成的研究。结果表明：与出发株相比,突变株ＦＢＬ生长速度加快;β－胡萝卜素含量提高２２．３％;藻多糖提高４２．０％;氨基酸增幅５．２％,氨基酸的组成比例发     

酸和热处理对海泡石结构及吸附Pb2+、 Cd2+性能的影响

通过X射线衍射、傅里叶变换红外光谱及比表面积分析等研究了酸和热处理对天然海泡石结构的影响,并考察不同处理后的海泡石样品吸附重金属Pb2+、Cd2+性能.结果表明,海泡石比表面积均随盐酸浓度、处理时间的增加而略有增大,而结构无明显变化,0.5 mol·L-1 HCl处理时,天然海泡石中的CaCO3未能被完全去除,6.0 mol·L-1 HCl处理72 h时,海泡石比表面积达到最大301.47 m2·g-1.盐酸热处理并不能提高海泡石的比表面积,也不会使海泡石结构产生明显变化.不同类型酸处理对海泡石比表面积提高顺序依次为:HCl>HNO3>H2SO4;海泡石经焙烧后比表面积迅速下降,由100℃的21.44 m2·g-1下降到900℃的0.17 m2·g-1.重金属吸附实验表明,盐酸处理浓度和时间对海泡石吸附Pb2+、Cd2+离子性能无明显影响;不同酸处理对海泡石吸附Pb2+、Cd2+离子性能存在一定影响,H2SO4处理后海泡石对Pb2+、Cd2+离子吸附量明显高于HCl和HNO3处理.海泡石焙烧处理后对Pb2+离子吸附量无明显影响,但对Cd2+离子吸附量在焙烧700℃以上时增加明显.     

滦河水体溶解性有机物的综合分级表征及其混凝去除过程

天然水体溶解性有机物(DOM)是微污染物的潜在载体,是消毒副产物的主要前驱物,自身又可能成为微污染物,因此研究其内在特性和去除机理有着重要的基础性科学意义.本研究综合利用化学、物理分级方法(即树脂和超滤分级法),对中国北方典型饮用水源--滦河水体的DOM进行全面分级表征.此水体DOM基本化学分级特征是憎水酸(HoA)、亲水性物质(HiM)含量较高,且具有季节稳定性;其物理分级特征是分子量＜1 kDa及3 kDa～10 kDa的组分含量较高,也表现出一定的时间稳定性.选用工业聚合铝(PAC)研究此DOM的基本混凝特征和内在混凝机理,结果表明,强憎水部分HoA及3 kDa～10 kDa间的有机物较易被去除,而较大分子量范围10 kDa～30 kDa间的有机物去除率较低,说明混凝过程中此DOM的物理性质不起主要作用,而化学性质更为重要.特别对DOM各组分作进一步(结合)分级研究,发现HoA主要在＞10 kDa范围.＜1 kDa的有机物中主要为HiM,但其中还含有HoA和弱憎水酸(WHoA),这使特定条件下部分＜1 kDa有机物被混凝去除成为可能.另外,HoA中按分子量大小仍可分为易去除和难去除部分,但分布不连续,易去除部分在3 kDa～10 kDa和＞30 kDa区间,而其10 kDa～30 kDa部分较难去除,说明可能存在其他结构性影响因素,值得深入研究.     

奶牛粪高温堆肥保氮与除臭技术实验研究

采用高温堆肥模拟试验研究了有效微生物EM和两种调理剂稻草、蚯蚓粪在奶牛粪堆肥中保氮和除臭的效应及各自适宜的添加比例。结果表明,在高温条件下,EM、稻草和蚯蚓粪均可明显降低奶牛粪中NH3和H2S的挥发,EM各添加比例的NH3去除率为7.06%～11.80%,H2S去除率为5.30%～10.81%;稻草各添加比例的NH3去除率为11.76%～66.03%,H2S去除率为10.63%～60.28%;蚯蚓粪各添加比例的NH3去除率为10.07%～50.75%,H2S去除率为13.95%～56.78%。同时,随着添加比例的提高,有效微生物EM、稻草和蚯蚓粪对NH3和H2S的去除率增大,达到奶牛粪堆肥中最大的保氮除臭效果时,EM的添加比例为3%、稻草的添加比例为30%、蚯蚓粪的添加比例为10%。     

基于AIS轨迹修复的船舶排放空间表征改进方法与应用

基于船舶自动识别系统(Automatic Identification System,AIS)数据表征船舶排放是目前船舶排放空间表征的主流方法,但AIS船舶轨迹点缺失会造成船舶排放量低估和船舶空间分布表征错误,进而影响船舶排放控制区的划分.为改进船舶排放空间表征,本研究以2013年广东省AIS船舶数据为例,采用基于时间和经纬度的三次样条方法对AIS船舶轨迹进行修复,结合动力法计算船舶排放,分析对比AIS轨迹修复前后船舶排放表征的差异,并利用空气质量模型和卫星观测评估AIS轨迹修复对船舶排放表征和广东沿海空气质量模拟的改进效果.结果表明:轨迹修复后广东省海域船舶轨迹点总数由4685773个增至5746664个,船舶NO_x排放量增加了0.6%.对于轨迹点与排放缺失集中的粤东海域,轨迹修复后船舶轨迹点数增加了88%,NO_x排放量在广东省船舶排放量的占比提升至22%,特别是在粤东重点修复海域NO_x排放量增加了2.7倍.原始轨迹在广东省海域较为稀疏,在粤东海域有明显轨迹缺失;轨迹修复后广东省海域船舶轨迹更为密集,粤东海域船舶轨迹得...     

2,4-dichlorophenoxyacetic acid (2,4-D) micropollutant herbicide removing from water using granular and powdered activated carbons: a comparison applied for water treatment and health safety

Abstract

Activated carbons are well-known porous materials as an effective adsorbent used for the removal of emerging contaminants, such as herbicides, which are increasingly present in water bodies. Most water treatment plants, specially in Brazil, are unable to completely remove such contaminants by the conventional process and advanced treatment using activated carbons is required. The aim of this paper was to verify the influence of the activated carbons granulometry and specific surface area on the 2,4-dichlorophenoxyacetic acid (2,4-D) herbicide removal efficiency using distilled-deionized water and filtered water collected from a conventional Water Treatment Plant. Commercial activated carbons samples used in this work were obtained from two different manufacturers. Activated carbons were analyzed by the specific surface area, pore size and volume distribution, nuclear magnetic resonance, infrared and x-ray spectroscopy, moisture, volatile matter and ash contents. Batch adsorption isotherms experiments were used and performed by Langmuir and Freundlich models. Granular and powdered activated carbons removed over 99% of 2,4-D in distilled water and near to 99% using filtered water. The activated carbons evaluated in this work presented high performance and played a key role in water treatment by removing 2,4-D herbicide, ensuring the protection of human health and the ecosystem.     

Development of inherent safety and health index for formulated product design

The numerous formulated products which are introduced to the market consist of chemical ingredients that may cause various safety and health hazards to the consumers. Therefore, it is extremely important to practice a systematic methodology to formulate products with acceptable safety and health performances. This work presents an index-based methodology to assess the safety and health hazards of the ingredients during the early formulation stage of product design. Hence, new inherent safety and health sub-indexes are introduced to improve the current safety and health hazards that are needed in formulated product design. The inherent safety and health sub-indexes are assigned with scores based on the degree of potential hazards. A higher score indicates a higher safety risk or severe health effect, and vice versa. The proposed methodology will greatly assist the users to identify the adverse safety and health effects caused by the ingredients. Hence, it is pivotal to eliminate or reduce the safety and health impacts from product usage. A case study on common ingredients used in the formulation of paint is presented on this study to describe the proposed method.     

苯胺降解菌的分离和特性研究

从活性污泥中分离到一株细菌ＡＮ３，能以苯胺为唯一碳源、氮源和能源生长．经鉴定为食酸丛毛胞菌（Ｃｏｍａｍｏｎａｓａｃｉｄｏｖｏｒａｎｓ）．该菌株可以在高达５０００ｍｇ／Ｌ以上的苯胺中生长．当苯胺浓度为２０００ｍｇ／Ｌ左右时，经３天培养即可全部被降解．该菌株还可以利用乙酰苯胺，但不能利用其他取代类苯胺化合物．ＡＮ３菌的生长和降解苯胺的最适温度为３０℃和ｐＨ为７０．９种金属离子对该菌的生长和苯胺的降解均有不同程度抑制作用，尤以Ａｇ＋和Ｈｇ２＋为明显．该菌与苯胺降解代谢有关酶类的测定结果表明，该菌含有的邻苯二酚－２，３加双氧酶是诱导酶．     

热变形对高速钢组织的影响

此文研究了W6Mo5Cr4V2高速钢奥氏体化后在750～1150℃等温热压变形对该钢组织的影响.结果表明:该钢在1050℃或更高温度形变才会发生动态再结晶,而950℃或更低温度形变仅发生动态回复;同时热形变诱发析出了NaCl晶型的MC型碳化物;由于形变及碳化物的析出,使得该钢等温形变后直接淬火组织中的位错马氏体量增多.     

A new environmental chamber for evaluation of gas-phase chemical mechanisms and secondary aerosol formation

A new state-of-the-art indoor environmental chamber facility for the study of atmospheric processes leading to the formation of ozone and secondary organic aerosol (SOA) has been constructed and characterized. The chamber is designed for atmospheric chemical mechanism evaluation at low reactant concentrations under well-controlled environmental conditions. It consists of two collapsible 90 m³ FEP Teflon film reactors on pressure-controlled moveable frameworks inside a temperature-controlled enclosure flushed with purified air. Solar radiation is simulated with either a 200 kW Argon arc lamp or multiple blacklamps. Results of initial characterization experiments, all carried out at 300–305 K under dry conditions, concerning NO_x and formaldehyde offgasing, radical sources, particle loss rates, and background PM formation are described. Results of initial single organic–NO_x and simplified ambient surrogate–NO_x experiments to demonstrate the utility of the facility for mechanism evaluation under low NO_x conditions are summarized and compared with the predictions of the SAPRC-99 chemical mechanism. Overall, the results of the initial characterization and evaluation indicate that this new environmental chamber can provide high quality mechanism evaluation data for experiments with NO_x levels as low as 2 ppb, though the results indicate some problems with the gas-phase mechanism that need further study. Initial evaluation experiments for SOA formation, also carried out under dry conditions, indicate that the chamber can provide high quality secondary aerosol formation data at relatively low hydrocarbon concentrations.