Seasonal and spatial occurrence and distribution of atmospheric polycyclic aromatic hydrocarbons (PAHs) in rural and urban areas of the North Chinese Plain

Passive air sampling (PAS) was employed to study the occurrence of gaseous and particle-bound PAHs in the North Chinese Plain. The averaged concentrations of gaseous and particle-bound PAHs were 485 ± 209 ng/m³ and 267 ± 161 ng/m³, respectively. The PAHs concentrations at urban sites were generally higher than those at rural ones with ratios <1.5 in spring, summer and fall, but differences between them were not significant for the wintertime and annually averaged concentrations. This urban-rural distribution pattern was related to the PAHs emission sources. PAHs spatial variation can be partially (49%) explained by emission with a simple linear regression method. Both the gaseous and particle-bound PAHs were highest in winter and lowest in summer, with winter/summer ratios of 1.8 and 8, respectively. Emission strength was the most important factor for the seasonality.     

Influence of Relative Humidity and Ozone on the Sampling of Volatile Organic Compounds on Carbotrap/Carbosieve Adsorbents

By using a dynamic dilution system, the atmospheric measurement of 11 selected toxics VOCs (ethylene, acetylene, propene, 1-butene, 1,3-butadiene, 1-pentene, 1-hexene, benzene, toluene, ethylbenzene, m+p-xylene) from the list WHO of 1996 and TO-14 method of US EPA by preconcentration by thermal desorption (TD), analysis by gas chromatography (GC), identification and quantification with a flame ionisation detector (FID) was developed and validated in term of metrology, especially the techniques of sampling of these VOCs with adsorbents cartridges "Air Toxics" when used with an "UMEG sampler" equipped in the inlet with a nafion membrane. In particular the influence of climatic conditions (temperature and relative humidity) and the influence of chemical factors like ozone, on the representativity of sampling were studied. Experiments made with various humidities showed that the addition of a nafion membrane in the inlet of the sampling system was required. Without this membrane, losses of compounds were observed for RH >50%. With this membrane, storage for 2 weeks in a refrigerator, as for canisters, did not induce a loss of compounds. No significative decrease of concentrations of the studied VOCs after 14 days storage, which are known to react with ozone, were observed with an ozone concentrations of 55 ppb. One explanation is that nafion membrane, placed in the inlet of the sampler, will neutralize ozone before entering the sampling tubes. This observation is in accordance with literature which states that the sampling of VOCs on Carbotrap cartridges without ozone scrubber induce a loss of compounds.     

Evaluation of ogawa passive sampling devices as an alternative measurement method for the nitrogen dioxide annual standard in El Paso, Texas

Nitrogen Dioxide (NO₂) is a common urban air pollutant that results from the combustion of fossil fuels. It causes serious human health effects, is a precursor to the formation of ground level ozone, another serious air pollutant, and is one of the six criteria air pollutants established by the United States (U.S.) Clean Air Act (CAA). Ogawa Passive Sampling Devices (PSDs) for NO₂ were collocated and operated at six NO₂ Federal Reference Method (FRM) monitor locations in the El Paso, Texas area for the 2004 calendar year. Passive samples were taken at 2-week, 3-week, and 4-week intervals and compared against the continuously operating FRM monitors. Results showed that the collective NO₂ annual arithmetic mean for all passive monitors was identical to the NO₂ mean for all FRM monitors. Of the individual locations, three passive annual NO₂ means were identical to their corresponding FRM means, and three passive annual NO₂ means differed from their corresponding FRM means by only one part per billion (ppb). Linear correlation analysis between all readings of the individual NO₂ PSDs and FRM values showed an average absolute difference of 1.2 ppb with an r ² of 0.95. Paired comparison between high and low concentration annual NO₂ sites, seasonal considerations, and interlab quality control comparisons all showed excellent results. The ease of deployment, reliability, and the cost-savings that can be realized with NO₂ PSDs could make them an attractive alternative to FRM monitors for screening purposes, and even possibly an equivalent method for annual NO₂ monitoring. More tests of the Ogawa NO₂ PSD are recommended for different ecosystem and climate regimes.     

The effect of pup vocalisations on food allocation in a cooperative mammal, the meerkat (Suricata suricatta)

In the meerkat (Suricata suricatta), a cooperative mongoose, pups follow potential feeders while the group is foraging and emit incessant calls when soliciting food from them. In contrast to a ’stationary’ brood of chicks, in which nestlings are fed at a fixed location, meerkat pups are ’mobile’ and become spread out. The question arises whether meerkat pups that experience different constraints to those facing chicks have evolved similar begging strategies. This paper describes the vocalisations that meerkat pups emit in the context of begging and investigates the influence of these calls on food allocation by older group members and on the behaviour of littermates. Meerkat pups use two types of calls when soliciting food from a potential feeder. The most common is a ’repeat’ call, which pups emit continuously when following an older forager over several hours a day. In addition, when a potential feeder finds a prey item, the pups next to it emit a bout of calls with increased calling rate, amplitude and fundamental frequency, termed ’high-pitched’ calls. Observations, together with playback experiments, showed that more prey was allocated to pups that called longer and more intensely. The pup closest to a feeder was almost always fed. The probability of emitting high-pitched calls did not depend on the time since a pup had received food, and the change from repeat to high-pitched calls occurred suddenly. The main function of the high-pitched call, therefore, does not appear to be to signal a pup’s hunger state. More likely, the two calls, in the context of begging, may be an adaptation to energetic constraints in a mobile feeding system. Pups, which are dispersed during foraging, may emit repeat calls over long periods to prevent potential feeders from eating all the prey themselves. At the moment a potential feeder finds prey, pups may give the more intense high-pitched calls to direct feeders to bring the food item to them and not to a littermate. Therefore, unlike the stationary feeding system where chicks emit one type of begging call when the feeder approaches the nest, meerkats, with a mobile feeding system, have evolved two discrete types of vocalisations in the context of begging. Received: 22 November 1999 / Revised: 1 July 2000 / Accepted: 17 July 2000     

生物滤池对气相与液相中污染物质的净化

通过实验室研究探讨了生物滤池同时处理废水和废气的可行性。试验结果表明：在２５℃－３７℃条件下,甲苯废气的流量为９０Ｌ／ｈ,甲苯浓度为５００ｍｇ／ｍ＾３;废水的流量为０．４Ｌ／ｈ,ＣＯＤｃｒ浓度为４００－７５０ｍｇ／Ｌ,甲苯与ＣＯＤｃｒ的去除率分别是７０％－７２％和８６％－８９％。     

Distribution and transport characteristics of fine particulate matter in beijing with mobile lidar measurements from 2015 to 2018

Accurately quantifying the concentration and transport flux of atmospheric fine particulate matter(PM_2.5) is vital when attempting to thoroughly identify the pollution formation mechanism.In this study,the mobile lidar measurements in Beijing on heavily polluted days in December from 2015 to 2018 are presented.The lidar was mounted on a vehicle,which could perform measurements along designated routes.On the basis of mobile lidar measurements along closed circuits of the 6 th Ring Road...     

Multi-stage sampling for large scale natural resources surveys: a case study of rice and waterfowl

Large-scale sample surveys to estimate abundance and distribution of organisms and their habitats are increasingly important in ecological studies. Multi-stage sampling (MSS) is especially suited to large-scale surveys because of the natural clustering of resources. To illustrate an application, we: (1) designed a stratified MSS to estimate late autumn abundance (kg/ha) of rice seeds in harvested fields as food for waterfowl wintering in the Mississippi Alluvial Valley (MAV); (2) investigated options for improving the MSS design; and (3) compared statistical and cost efficiency of MSS to simulated simple random sampling (SRS). During 2000-2002, we sampled 25-35 landowners per year, 1 or 2 fields per landowner per year, and measured seed mass in 10 soil cores collected within each field. Analysis of variance components and costs for each stage of the survey design indicated that collecting 10 soil cores per field was near the optimum of 11-15, whereas sampling >1 field per landowner provided few benefits because data from fields within landowners were highly correlated. Coefficients of variation (CV) of annual estimates of rice abundance ranged from 0.23 to 0.31 and were limited by variation among landowners and the number of landowners sampled. Design effects representing the statistical efficiency of MSS relative to SRS ranged from 3.2 to 9.0, and simulations indicated SRS would cost, on average, 1.4 times more than MSS because clustering of sample units in MSS decreased travel costs. We recommend MSS as a potential sampling strategy for large-scale natural resource surveys and specifically for future surveys of the availability of rice as food for waterfowl in the MAV and similar areas.     

Determination of Frequency for Remeasuring Ground and Vegetation Cover Factor Needed for Soil Erosion Modeling

Determining a remeasurement frequency of variables over time is required in monitoring environmental systems. This article demonstrates methods based on regression modeling and spatio-temporal variability to determine the time interval to remeasure the ground and vegetation cover factor on permanent plots for monitoring a soil erosion system. The spatio-temporal variability methods include use of historical data to predict semivariograms, modeling average temporal variability, and temporal interpolation by two-step kriging. The results show that for the cover factor, the relative errors of the prediction increase with an increased length of time interval between remeasurements when using the regression and semivariogram models. Given precision or accuracy requirements, appropriate time intervals can be determined. However, the remeasurement frequency also varies depending on the prediction interval time. As an alternative method, the range parameter of a semivariogram model can be used to quantify average temporal variability that approximates the maximum time interval between remeasurements. This method is simpler than regression and semivariogram modeling, but it requires a long-term dataset based on permanent plots. In addition, the temporal interpolation by two-step kriging is also used to determine the time interval. This method is applicable when remeasurements in time are not sufficient. If spatial and temporal remeasurements are sufficient, it can be expanded and applied to design spatial and temporal sampling simultaneously.     

污染源普查后区域环境管理应用探讨

在第二次全国污染源普查的基础上,利用污染源普查期间配置的软硬件,开发市级区域环境污染源管理平台,进行污染源数据的年度更新,拓展污染源普查软件应用,实现环境管理及环境执法移动终端的应用。拓展二污普一张图的功能,利用移动客户端机动实时及地定位导航等为环境管理执法和环境突发事件应急处置提供技术支持。     

Diffusive gradients in thin films using molecularly imprinted polymer binding gels for in situ measurements of antibiotics in urban wastewaters

• Selective molecularly imprinted polymer (MIP) binding gel was prepared. • MIP-DGT showed excellent uptake performance for antibiotics. • In situ measurement of antibiotics in wastewaters via MIP-DGT was developed. • The MIP-DGT method was robust, reliable, and highly sensitive. Urban wastewater is one of main sources for the introduction of antibiotics into the environment. Monitoring the concentrations of antibiotics in wastewater is necessary for estimating the amount of antibiotics discharged into the environment through urban wastewater treatment systems. In this study, we report a novel diffusive gradient in thin films (DGT) method based on molecularly imprinted polymers (MIPs) for in situ measurement of two typical antibiotics, fluoroquinolones (FQs) and sulfonamides (SAs) in urban wastewater. MIPs show specific adsorption toward their templates and their structural analogs, resulting in the selective uptake of the two target antibiotics during MIP-DGT deployment. The uptake performance of the MIP-DGTs was evaluated in the laboratory and was relatively independent of solution pH (4.0–9.0), ionic strength (1–750 mmol/L), and dissolved organic matter (DOM, 0–20 mg/L). MIP-DGT samplers were tested in the effluent of an urban wastewater treatment plant for field trials, where three SA (sulfamethoxazole, sulfapyridine, and trimethoprim) and one FQ (ofloxacin) antibiotics were detected, with concentrations ranging from 25.50 to 117.58 ng/L, which are consistent with the results measured by grab sampling. The total removal efficiency of the antibiotics was 80.1% by the treatment plant. This study demonstrates that MIP-DGT is an effective tool for in situ monitoring of trace antibiotics in complex urban wastewaters.