一种新型滑动集电材料的研制及性能研究

利用粉末冶金 /挤压的方法制作了一种新型的Cu C滑动集电材料 ,并对该材料的机械物理、摩擦磨损性能进行了检测 ,结果证明该材料具有较高的抗拉强度、适中的表面硬度、较低的电阻率、优良的摩擦磨损性能 ,是一种较为优良的电力机车滑板材料。其性能测试结果和铁道部标准要求相比 ,优于铁道部标准要求。     

半干法喷射烟气脱硫试验研究

介绍了半干法喷射烟气脱硫试验 ,研究了钙硫比、雾化水量、进口SO2 浓度、湿度等主要因素对脱硫率的影响规律 ,对布袋除尘器的辅助脱硫也进行了研究。结果将有助于改进半干法脱硫技术 ,并为进一步的工业应用提供了参考数据。     

Photodegradation of acetochlor in water and UV photoproducts identified by mass spectrometry

The sunlight photodegradation half-lives of 20 mg/L acetochlor were 151, 154 and 169 days in de-ionized water, river water and paddy water, respectively. When exposed to ultraviolet (UV) light, acetochlor in aqueous solution was rapidly degraded. The half-lives were7.1, 10.1, and 11.5 min in de-ionized water, river water and paddy water, respectively. Photopreduets of acetochlor were identified by gas chromatography/mass spectrometry(GC/MS) and found at least twelve photoproducts resulted from dechlorination with subsequent hydrtrxylation and cyclization processes. The chemical structures of ten photoproducts were presumed on the basis of mass spectrum interpretation and literature data. Photoproducts are identified as 2-ethyl-6-methylaniline; N, N-diethylaniline ; 4, 8-dimethyl-2-oxo- 1,2,3,4- tetrahydroquino-line; 2-oxo-N-(2-ethyl-6-methylphenyl)-N-(ethoxymethyl) acetamide; N-(ethoxymethyl)-2‘-ethyl-6‘-methylformanilide; 1-hydroxyaeetyl-2-ethoxyl-7-ethylind ole; 8-ethyl-l-ethoxymethyl-2-oxo-1, 2, 3, 4-tetrahydroquinoline; 4, 8-dimethyl-l-ethoxymethyl-2-oxo-1, 2, 3, 4-tetrahydroquinoline; 2-hydroxy-2‘-ethyl-6‘-methyl-N-(ethoxymethyl) acetanilide and a compound related to acetochlor. The other two photoproducts were detected by GC/MS although their chemical structure was unknown.     

废渣──Al(OH)_3凝胶再利用研究

研究了对处理铝材加工含Al3＋的酸性废液过程中产生的二次污染物Al（OH）3凝胶废渣的应用。含水分约90％、80％左右的Al（OH）3凝胶200g分别与14～16mL、22～24mL95％的工业浓硫酸酸反应，可制得浓度为20％～23％的Al（SO4）3溶液，经稀释可用作造纸原料。     

45,X/46,XY chromosome mosaicism detected by midtrimester amniocentesis in amniocyte clones

Amniocyte clones from a mid-trimester pregnancy disclosed 45,X/46,XY sex chromosome mosaicism. Because of the uncertainty concerning the phenotype of the fetus, the parents elected to terminate the pregnancy. Mixed (asymmetrical) gonadal dysgenesis was not found. The fetus appeared to have a normal male uro-genital system. No malformations of any type were detected, although as expected, the fetus did have 45,X/46,XY mosaicism.     

无缝钢管局部径向模具塑性成形过程的三维有限元数值模拟

采用大变形弹塑性有限元理论,用DYNA3D(研究版)有限元软件,对无缝钢管局部径向模具塑性成形过程中当凸模的凹槽尺寸与凸模的圆弧半径发生变化时进行了数值模拟研究,得出了对成形钢管表面质量控制具有重要参考价值的结论,解决了成形钢管表面的压痕问题。     

MFC在UG二次开发CAD系统中的应用

针对UG开发中的困难,目前还没有在UG/OPENAPI中调用MicrosoftFundamentClass(MFC)的方法,着重介绍了如何应用MFC开发UG的方法以及辅助开发模块UG/Open MenuScript的使用。并用一个完整的例子来说明如何利用UG/OPENAPI,MFC,及MenuScript进行联合开发CAD系统。     

Effects of bifenthrin on Daphnia magna during chronic toxicity test and the recovery test

IntroductionWiththedevelopmentandapplicationofnewpesticide ,insecticidehasgreatlyreducedtheharmofpesttocrops .Bifenthrinisaneffectivepyrethroidinsecticideandacaricideagainstawiderangeofinsectpests ,anditisverypoisonoustomammal,aquatic .Thisinsecticideiswi…     

垃圾焚烧中PCDD/Fs的检测

ＰＣＤＤ／Ｆｓ的产生和排放是人们所关注的问题，垃圾焚烧是ＰＣＤＤ／Ｆｓ的一个重要来源。从其生成的反应机理看，ＰＣＤＤ／Ｆｓ主要是由于垃夫中存在氯源和不完全燃烧产生的。对垃圾焚烧后的烟气中的ＰＣＤＤ／Ｆｓ进行检验具有现实的意义。从国内外的分析方法及分析设备的现状比较，建议引起有关部门的足够重视，广泛开发检测工作，以保障人民的生活健康。     

淮海经济区核心区污染排放对重点区域城市PM2.5贡献研究

基于WRF-CMAQ空气质量模型，采用开关污染源排放的敏感性试验方法，定量分析了淮海经济区核心区污染排放对京津冀区域、"2+26 "大气污染传输通道城市、汾渭平原地区和长三角区域PM_2.5的贡献.结果表明，对京津冀区域，污染贡献比例最大值出现在10月份，同时对不同城市的贡献值在10%以内变化；对" 2+26"大气传输通道城市，影响的时空差异变化明显，其中对聊城市、菏泽市和济南市的贡献值均超过了10%；对汾渭平原地区的贡献总体较弱，最大贡献值低于5%；对长三角区域，贡献值在不同城市间的时空差异变化明显.考虑到淮海经济区地处京津冀和长三角过渡地带，且对京津冀和长三角区域PM_2.5影响较大，建议尽快将淮海经济区核心地区纳入国家大气污染重点控制区.