Molecular diversity of arbuscular mycorrhizal fungi at a large-scale antimony mining area in southern China

Arbuscular mycorrhizal fungi (AMF) have great potential for assisting heavy metal hyperaccumulators in the remediation of contaminated soils. However, little information is available about the community composition of AMF under natural conditions in soils contaminated by antimony (Sb). The objective of this study was to investigate the characteristics of AMF molecular diversity, and to explore the effects of Sb content and soil properties on the AMF community structure in an Sb mining area. Four Sb mine spoils and one adjacent reference area were selected from around the Xikuangshan mine in southern China. The association of AMF molecular diversity and community composition with the rhizosphere soils of the dominant plant species was studied by Polymerase Chain Reaction-Denaturing Gradient Gel Electrophoresis (PCR-DGGE). Results from all five studied sites showed that the diversity of AMF decreased with increasing Sb concentration. Principal component analysis (PCA) indicated that the AMF community structure was markedly different among these groups. Further redundancy analysis (RDA) showed that Sb contaminationwas the dominating factor influencing the AMF community structure in the Sb mine area. However, the multivariate analysis showed that, apart from the soil Sb content, extractable nitrogen content and organic matter content also attributed to AMF sequence distribution type. Some AMF sequences were only found in the highly contaminated area and these might be ideal candidates for improving phytoremediation efficiency in Sb mining regions. Gene sequencing analysis revealed that most species were affiliated with Glomus, suggesting that Glomus was the dominant AMF genus in the studied Sb mining area.     

Kinetic and equilibrium isotherm studies for the adsorptive removal of Brilliant Green dye from aqueous solution by rice husk ash

The present study deals with the adsorption of Brilliant Green (BG) on rice husk ash (RHA). RHA is a solid waste obtained from the particulate collection equipment attached to the flue gas lines of rice husk fired boilers. Batch studies were performed to evaluate the influences of various experimental parameters like initial pH (pH0), contact time, adsorbent dose and initial concentration (C0) on the removal of BG. Optimum conditions for BG removal were found to be pH0 approximately 3.0, adsorbent dose approximately 6 g L(-1) of solution and equilibrium time approximately 5 h for the C0 range of 50-300 mg L(-1). Adsorption of BG followed pseudo-second-order kinetics. Intra-particle diffusion does not seem to control the BG removal process. Equilibrium isotherms for the adsorption of BG on RHA were analyzed by Freundlich, Langmuir, Redlich-Peterson (R-P), Dubnin-Radushkevich (D-R), and Temkin isotherm models using a non-linear regression technique. Langmuir and R-P isotherms were found to best represent the data for BG adsorption onto RHA. Adsorption of BG on RHA is favourably influenced by an increase in the temperature of the operation. Values of the change in entropy (DeltaS0) and heat of adsorption (DeltaH0) for BG adsorption on RHA were positive. The high negative value of change in Gibbs free energy (DeltaG0) indicates the feasible and spontaneous adsorption of BG on RHA.     

Combined molecular mechanics, molecular dynamics and quantum mechanical study of (+)-multifidene structure and conformation

Molecular mechanics, molecular dynamics and quantum mechanical tools have been used to explore the conformational space of (+)(3S,4S)-multifidene bioactive compounds. All the computations have been performed in the absence and presence of the solvent, simulated by the explicit introduction of a number of water molecules or by the polarized continuum model (PCM). Three conformational minima, both in vacuo and in water (simulated by PCM tool), have been confirmed at ab initio level of theory (B3LYP and MP2). All minima lie in a very narrow range of energy, and the interconversion between them is possible with a small amount of energy expense.     

Synthesis of Molecular Imprinting Polymers Separating Toluic Acid Isomers (II)

Polymers that can separate toluic acid isomers were synthesized by molecular imprinting technique. Molecular imprinting polymers (MIPs) for each isomer of toluic acids (TA) were synthesized using styrene and 4-vinylpyridine (4-Vpy). The adsorption characteristics of TA isomers, salicylic acid (SA), and benzoic acid (BA) on each MIP were investigated. The materials used for polymerization of TA isomers MIPs were adsorbed relatively well. This verifies that the MIPs which can adsorb template selectively were synthesized. In addition, the quantities of adsorbed TA isomers on the TA isomers MIPs and on the control polymer polymerized without template were compared and discussed. The variation of adsorption ability for MIPs with repeated use was investigated, showing excellent reproducibility.     

SBR生物反应器出水溶解态有机物性质特点研究

研究中考察了SBR生物反应器处理实际生活污水过程中,反应器内部溶解性有机物的变化情况,重点分析了污泥龄对于SBR反应器出水溶解态有机物性质特点的影响.研究结果表明,生物降解过程中,以分子量650Da、1700Da和2000Da为代表的腐殖质类有机物逐渐积累,小分子量有机物(<200Da)逐渐转化为具有中间分子量(500...     

Combined application of conservative transport modelling and compound-specific carbon isotope analyses to assess in situ attenuation of benzene, toluene, and o-xylene

In recent years, compound specific isotope analyses (CSIA) have developed into one of the most powerful tools for the quantification of in situ biodegradation of organic contaminants. In this approach, the calculation of the extent of biodegradation of organic contaminants in aquifers is usually based on the Rayleigh equation, and thus neglects physical transport processes such as dispersion that contribute to contaminant dilution in aquifers. Here we combine compound specific isotope analyses with a conservative transport model to study the attenuation of aromatic hydrocarbons at a former gasworks site. The conservative transport model was first used to simulate concentration reductions caused by dilution at wells downgradient of a BTEX source. In a second step, the diluted concentrations, together with the available stable carbon isotope ratios and carbon fractionation factors for benzene, toluene and o-xylene were applied in the Rayleigh equation to quantify the degree of biodegradation at each of those wells. At the investigated site, where other attenuation processes such as sorption and volatilisation were proven to be negligible, the combined approach is recommended for benzene, which represents a compound for which the effect of biodegradation is comparable to or less than the effect of dilution. As demonstrated for toluene and o-xylene, the application of the Rayleigh equation alone is sufficient if dilution can be proved to be insignificant in comparison to biodegradation. The analysis also suggests that the source width and the position of the observation wells relative to the plume center line are significantly related to the degree of dilution.     

Evaluation of the spontaneous combustion characteristics of coal of different metamorphic degrees based on a temperature-programmed oil bath experimental system

Research on the micro- and macrocharacteristics of different metamorphic degrees of coal helps improve the control and protection techniques used during spontaneous combustion. Nine coals with different properties were thoroughly investigated in this study. Fourier transform infrared spectroscopy and a self-designed temperature-programmed oil bath experimental system were adopted to analyze the molecular structure and macrocharacteristic parameters of the spontaneous combustion of coal. Additionally, the influence of particle size on spontaneous combustion was considered. Various functional groups were employed as microcharacteristic parameters to capture the principal active groups in oxidation. The gas production rate, oxygen consumption rate, gas concentration, heat energy release rate, and characteristic temperatures were evaluated as macrocharacteristic parameters to investigate the changes in coal during oxidation. The results establish that the microcharacteristics of coal molecules determine the degree of spontaneous combustion based on intrinsic properties and that changes in the macrocharacteristics of the spontaneous combustion of coal reflect the microstructural changes. The contents of the hydroxyl groups, carbonyl groups, alkyl ether and aryl ether in the coal molecules gradually decrease with the metamorphic increase. Oxygen-containing functional groups have higher reactivities and easily react with oxygen, causing the macroparameters, such as the oxygen consumption rate, the gas generation rate and the heat energy release rate, to consistently decrease with the increase of the metamorphic degree. Small-particle-size coal molecules have more active aliphatic hydrocarbons, oxygen-containing functional groups and a larger specific surface area, increasing the chances of adsorbing the oxygen of active groups and promoting the reaction between coal and oxygen. The experimental results indicate that coal samples with higher metamorphic degrees or larger sizes exhibit lower tendencies toward spontaneous combustion. Evaluation of the spontaneous combustion of coal based on a temperature-programmed oil bath experimental system is of great practical importance for preventing the spontaneous combustion of coal during storage, processing and utilization and can serve as a convenient reference for production safety in mining applications.     

The need for spatially explicit quantification of benefits in invasive‐species management

Worldwide, invasive species are a leading driver of environmental change across terrestrial, marine, and freshwater environments and cost billions of dollars annually in ecological damages and economic losses. Resources limit invasive‐species control, and planning processes are needed to identify cost‐effective solutions. Thus, studies are increasingly considering spatially variable natural and socioeconomic assets (e.g., species persistence, recreational fishing) when planning the allocation of actions for invasive‐species management. There is a need to improve understanding of how such assets are considered in invasive‐species management. We reviewed over 1600 studies focused on management of invasive species, including flora and fauna. Eighty‐four of these studies were included in our final analysis because they focused on the prioritization of actions for invasive species management. Forty‐five percent (n = 38) of these studies were based on spatial optimization methods, and 35% (n = 13) accounted for spatially variable assets. Across all 84 optimization studies considered, 27% (n = 23) explicitly accounted for spatially variable assets. Based on our findings, we further explored the potential costs and benefits to invasive species management when spatially variable assets are explicitly considered or not. To include spatially variable assets in decision‐making processes that guide invasive‐species management there is a need to quantify environmental responses to invasive species and to enhance understanding of potential impacts of invasive species on different natural or socioeconomic assets. We suggest these gaps could be filled by systematic reviews, quantifying invasive species impacts on native species at different periods, and broadening sources and enhancing sharing of knowledge.     

Density and extra-pair fertilizations in birds: a comparative analysis

Møller and Birkhead (1992, 1993) reported that extra-pair copulations (EPCs) occur more frequently in colonial than dispersed nesting birds. We comprehensively reviewed published data to investigate how breeding density affects extra-pair fertilizations (EPFs). Within species EPFs appeared to increase with density: two of three studies on colonial breeders and six of eight on dispersed nesters showed increases in EPFs with increasing density. However, comparisons among species (n?=?72) revealed no evidence that EPF frequencies correlated with (1) nesting dispersion, (2) local breeding density, or (3) breeding synchrony, even when each of these variables in turn was held constant and phylogenetic relationships were taken into account via contrast analyses. Methodological and biological reasons for the disparity between observational studies of EPCs and molecular genetic analyses of EPFs are discussed.