防渗材料在日本垃圾填埋场的应用

介绍了日本垃圾填埋场防渗系统的构造和防渗材料的分类,以及近年日本各种防渗材料的使用情况。同时作者也结合中国的实际情况提出了适合我国国情的垃圾填埋场防渗系统构造。     

Catchment-Wide Wetland Assessment and Prioritization Using the Multi-Criteria Decision-Making Method TOPSIS

It is widely accepted that wetland ecosystems are under threat worldwide. Many communities are now trying to establish wetland rehabilitation programs, but are confounded by a lack of objective information on wetland condition or significance. In this study, a multi-criteria decision-making method, TOPSIS (the Technique for Order Preference by Similarity to Ideal Solution), was adapted to assist in the role of assessing wetland condition and rehabilitation priority in the Clarence River Catchment (New South Wales, Australia). Using 13 GIS data layers that described wetland character, wetland protection, and wetland threats, the wetlands were ranked in terms of condition. Through manipulation of the original model, the wetlands were prioritized for rehabilitation. The method offered a screening tool for the managers in choosing potential candidate wetlands for rehabilitation in a region.     

Determination of Frequency for Remeasuring Ground and Vegetation Cover Factor Needed for Soil Erosion Modeling

Determining a remeasurement frequency of variables over time is required in monitoring environmental systems. This article demonstrates methods based on regression modeling and spatio-temporal variability to determine the time interval to remeasure the ground and vegetation cover factor on permanent plots for monitoring a soil erosion system. The spatio-temporal variability methods include use of historical data to predict semivariograms, modeling average temporal variability, and temporal interpolation by two-step kriging. The results show that for the cover factor, the relative errors of the prediction increase with an increased length of time interval between remeasurements when using the regression and semivariogram models. Given precision or accuracy requirements, appropriate time intervals can be determined. However, the remeasurement frequency also varies depending on the prediction interval time. As an alternative method, the range parameter of a semivariogram model can be used to quantify average temporal variability that approximates the maximum time interval between remeasurements. This method is simpler than regression and semivariogram modeling, but it requires a long-term dataset based on permanent plots. In addition, the temporal interpolation by two-step kriging is also used to determine the time interval. This method is applicable when remeasurements in time are not sufficient. If spatial and temporal remeasurements are sufficient, it can be expanded and applied to design spatial and temporal sampling simultaneously.     

半导体企业的EHSMS评价体系研究

为了给员工提供安全、环保、健康的工作环境,半导体制造企业必须建立环境管理和职业健康安全管理体系(EHSMS).为此,评价EHSMS运行的有效性、完整性以及合法性就显得十分重要.本文在分析半导体企业污染物影响环境和健康基础上,建立了EHSMS评估体系.为了实施EHSM评估系统,方便半导体企业用户使用,提出了一套EHSM评价系统的计算机软件解决方案.     

高职院校试行"综合导师制"的教育教学实践研究

结合学院迎接人才培养工作水平评估和学院“迎评促建”工作的要求,凸现高职教育“以就业为导向”的办学要求,在环境工程系推行了“综合导师制”。意在充分发挥专业老师在教书育人、专业辅导、大学生人生规划和就业素质提高上的优势,积极构建环境工程系全员育人、全程育人、全方位育人的工作格局,建立一种师生互动的新型教育教学关系。     

我国电子废弃物的管理及发展道路研究

我国电子废弃物的处理处置正向产业化方向稳步推进。本文概括了电子废弃物的特点,以及我国目前处理电子废弃物的现状。遵照循环经济理念,并基于我国国情,提出了我国在电子废弃物处理处置过程中应遵循的主要原则和今后的发展方向。     

悬浮填料活性污泥法优化填料投配比试验

悬浮填料活性污泥法中试试验系统,利用某城市污水厂生产工艺回流污泥为系统悬浮污泥,探讨了悬浮填料投配比、投配方式和中试硝化效果之间的关系。试验结果表明,悬浮填料最小投配比为15%即可满足系统硝化功能的要求;悬浮填料的投配方式宜采用集中投配并布置于曝气池的末端,这样既可提高系统的生物膜量,又有利于硝化反应的实现。而且,控制适当的溶解氧浓度,悬浮填料的投加有助于同步硝化反硝化更充分的进行。     

污水直接膜过滤用于农灌可行性试验

本试验尝试用膜直接截留污水中对人体健康有害的细菌病毒,而保留水中对作物有益的氮、磷等营养元素,以期实现水、肥双成分资源化。试验结果表明,无论是微滤膜还是超滤膜均对细菌及粪大肠菌有很高的截留率(99.9%～99.999%),污水中有机物、氮与磷的保留率分别为32%～67%、72%～78%和60%～62%。用渗滤液灌溉的小麦较之清水灌溉和常规灌溉的小麦,麦穗单重分别提高13%和7.5%。     

生物浮选法处理含油污泥

利用从石油污染物中分离的一组微生物菌株对胜利油田含油污泥进行了生物浮选处理,探讨了处理过程中温度、稀释率、投加菌量及加糖量等因子对油去除率的影响及组合菌株与单一菌株处理效果的差异。通过实验获得生物浮选最佳运行参数为:温度40℃,稀释率98%,加菌量3.75%,加糖量0.25%,在该参数运行条件下,原油去除率可达95%以上。使用混合菌株进行生物浮选有利于回收原油中含油量的提高。     

城镇餐饮泔水离心脱水试验研究

简要介绍了城市餐饮泔水的来源、基本特征及目前主要处理技术方法,提出了餐饮泔水无害资源化新工艺。对提出的工艺中泔水离心脱水工序进行了试验研究,并得出最佳离心参数:时间5min、转速3200rmin。