Relationship between physicochemical properties and dewaterability of hydrothermal sludge derived from different source

Sewage sludge (SS) and deinking sludge (DS) were used to comparatively study the hydrothermal dewatering of sludge with different components. For a better overview, an insight into the relationship between physicochemical properties and dewaterability of hydrothermal sludge was provided. Results found that not all kinds of sludge were suitably conditioned by hydrothermal treatment (HT) in term of the elevation of dewaterability. Higher hydrothermal temperature tended to enhance the dewaterability of SS rather than DS, which was supported by the variation of their physicochemical properties (including water distribution, bonding energy, extracellular polymeric substance (EPS), particles size, acid functional groups and zeta potential in this study). In addition, the changes in surface morphology suggested that the reverse effect of HT on sludge dewaterability was mainly due to their dewatering behavior. For SS, the destruction of EPS structure leaded to the release of bound water, thereby strengthening sludge dewatering. Conversely, “Bridging effect” generated by lignocellulose in DS was beneficial for sludge dewatering; however, the increasing hydrothermal temperature degraded part of lignocellulose and weakened “bridging effect”, finally resulting in worse dewaterability of DS.     

微波消解-ICP-OES联合测AZ61镁合金中Zn、Mn、Al的不确定度分析

目的研究AZ61镁合金中合金元素成分分析过程中的不确定度因素,以提高分析结果的准确性。方法采用微波消解仪消解样品,以电感耦合等离子体发射光谱仪(ICP-OES)测定AZ61镁合金中锌、锰、铝元素的含量。分析测试过程中产生不确定度的因素,并且进行评定和计算。结果采用微波消解-ICP-OES法测定镁合金中锌、锰、铝元素的含量时,测量不确定度主要由样品溶液稀释、移液枪、标准曲线以及测试的重复性引起,AZ61镁合金主要的合金成分为锌(1.1270%±0.0433%)、锰(0.1797%±0.0064%);铝(6.4468%±0.2029%)。结论对分析过程中产生的不确定度因素进行分析及评定,可以确保分析结果的可靠性以及准确性,从而更好地控制镁合金的性能,提高镁合金的装备环境适应性。     

关于中小城市生活垃圾的处理与回收利用的探讨

对城市生活垃圾的分类回收、处理进行了探讨，对完善城市基础设施建设，改善投资环境将起到重要作用。     

粗苯污染事故应急处理

针对一次苯泄漏事故的应急处理过程、方法进行论述与总结，并分析了事故现场周围地表、地下水中苯污染浓度的变化情况，提出了该类事故的应急措施，以此作为处理同类事故的参考和依据。     

密切值法在污染源治理方案优选中的应用

本文采用密切值法进行污染源多个治理方案的优化决策研究，并通过实例分析获得了与实际状况相符合的优化结果。     

Kinetics of continuous biodegradation of pesticide organic wastewater by activated carbon-activated sludge

１ＩｎｔｒｏｄｕｃｔｉｏｎＮｏｖｅｌｂｉｏｌｏｇｉｃａｌａｃｔｉｖａｔｅｄｃａｒｂｏｎａｎｄａｃｔｉｖａｔｅｄｓｌｕｄｇｅｓｙｓｔｅｍｈａｓｓｈｏｗｎｉｔｓｅｆｅｃｔｉｖｅａｂｉｌｉｔｙｔｏｒｅｄｕｃｅＣＯＤｉｎｔｏｘｉｃｏｒｇａｎｉｃｗａｓｔｅｗａ...     

LPWCO method for the treatment of high concentrated organic wastewater

Based on wet air oxidation (WAO) and Fenton reagent, thispaper raises a new low pressure wet catalytic oxidation(LPWCO)which requires low pressure for the treatment of highlyconcentrated and refractory organic wastewater. Compared withgeneral wet air oxidation, the pressure of the treatment(0.1-0.6MPa) is only one of tens to percentage of latter(3.5-10MPa). Inaddition, its temperature is no more than 180℃.Compared withFenton reagent, while H2O2/COD(weight ratio) less than 1.2, theremoval of COD in the treatment is over twenty percents more thanFenton's even the value of COD is more than 14000mg/L. In thispaper, we study the effect factor of COD removal and the mechanismof this treatment. The existence of synergistic effect (catalytic oxidation and carbonization) for COD removal in H2SO4-Fenton reagent system under the condition of applied pressure and heating (0.1-0.6MPa, 104-165℃) was verified. The best condition of this disposal are as follows:H2O2/COD(weight ratio)=0.2-1.0, Fe2+ 0.6×10-3 mol, H2SO4 0.5mol, COD>1×104mg/L, the operating pressure is 0.1-0.6MPa and temperature is 104-165℃. This method suit to dispose the high-concentrated refractory wastewater, especially to the wastewater containing H2SO produced in the manufacture of pesticide, dyestuff and petrochemical works.     

高浓度废水预处理

从分析冲击炼油污水处理的原因出发，阐述了高浓度废水预处理的重要性；重点介绍了三种好氧生物法处理技术；其中ＳＢＲ法由于工程技术日趋成熟，可优先推广应用     

石油亚砜萃取巯基醋酸的研究

对石油亚砜(PSO)萃取巯基醋酸的条件和影响进行了实验研究,确定了石油亚砜通过氢键和巯基醋酸形成的萃合物的组成.为从废水中回收巯基醋酸以及石油硫醚的综合利用提供了依据.     

AT－SS复合颗粒吸附剂的制备和除铅性能研究

通过颗粒吸附剂在含铅溶液中的振荡实验．研究了凹凸棒石粘土（ＡＴ）和钢渣（ＣＳ）、水泥（ＳＮ）、石英砂（ＳＳ）制得的多种复合颗粒吸附剂的除铅性能及制备条件．确定出最佳颗粒吸附剂为ＡＴ－ＳＳ，混合比为５：１，７００℃下焙烧１２０ｍｉｎ．对铅的静态吸附容量高达５００ｍｇ／ｇ以上，动态吸附容量为６０ｍｇ／ｇ．在１．５ｍｌ／ｍｉｎ的流速下，穿透时间为２０ｈ，洗脱回收率为４８．３％．当Ｐｂ进样量为２００ｍｇ／Ｌ时，ＡＴ－ＳＳ吸附剂在２３６倍床体积之内，流出液浓度低于排放标准．