磁性氮掺杂碳材料活化过硫酸盐降解酸性橙7

采用一步水热碳化法制备出微米级磁性氮掺杂碳材料（Magnetic N-doped Carbonaceous Materials,MNC）作为过硫酸盐（Persulfate,PDS）活化剂,以生成的活性氧化物质降解偶氮类染料酸性橙7（Acid Orange 7,AO7）.同时,利用扫描电镜（SEM）、比表面积与孔径测定仪（BET）、振动样品磁强计（VSM）等对MNC进行表征,考察了MNC投加量、PDS浓度、初始p H值和无机阴离子对活化PDS降解AO7的影响,并采用紫外-可见光谱分析、淬灭实验和电子顺磁性共振（Electron Paramagnetic Resonance,EPR）初步探讨了AO7的降解机理.结果表明,MNC呈微米级球状,表面富含含氧基团和氨基等活性点位;饱和磁化强度为12.7 emu·g^-1,能在外加磁场条件下实现固液分离.AO7去除率随MNC投加量、PDS浓度的增加而增加,但初始p H对AO7降解的影响呈相反规律,随p H升高而降低.3种无机阴离子对AO7降解抑制程度大小顺序为HCO₃^->SO     

掺氮Ta2O5诱发可见光-类Fenton体系降解阿特拉津研究

通过制备具有强可见光吸收和活性的半导体掺氮Ta2O5,利用其可见光Fe3+还原活性,实现了可见光-类Fenton体系有效地降解阿特拉津.结果表明,氨气流量0.3 L.min-1、700℃氮化时间6 h制备出的掺氮Ta2O5在可见光下还原Fe3+的能力最佳;阿特拉津降解效果与各种操作条件———光强、催化剂投加量、Fe3+、H2O2、阿特拉津初始浓度及pH值有关,并通过H2O2的分解揭示影响的原因.在pH为2.6、[atrazine]0=18 mg.L-1、[H2O2]0=2.5 mmol.L-1、[Fe3+]0=0.5 mmol.L-1、掺氮Ta2O5投加量为0.6 g.L-1、500 W氙灯照射下,反应60 min时,阿特拉津的降解率为97%.该研究为可见光-类Fenton体系降解有机污染物的实际应用提供了基础数据和理论指导.     

Urgently reveal longly hidden toxicant in a familiar fabrication process of biomass-derived environment carbon material

Biomass-derived N-doped carbon (BNC) is an important environmental material and widely used in the fields of water purification and soil remediation. However, the toxicant in the commonly used synthesis process of BNC materials have been largely ignored. Herein, we firstly report the presence of a highly toxic by-product (KCN) in the activation process of BNC materials consequential of the carbothermal reduction reaction. Because this carbothermal reduction reaction also regulates the N-doping and pore development of BNC materials, the KCN content directly relates with the properties of BNC material properties. Accordingly, a high KCN content (∽ 611 mg) can occur in the production process of per g BNC material with high specific surface area (∽ 3600 m²/g). Because the application performance of BNC material is determined by the surface area and available N doping, therefore, production of a BNC material with high performance entails high risk. Undoubtedly, this study proves a completely new risk recognition on a familiar synthesis process of biomass-based material. And, strict protective device should be taken in fabrication process of biomass-derived carbon material.     

Efficient degradation of drug ibuprofen through catalytic activation of peroxymonosulfate by Fe3C embedded on carbon

Ibuprofen(IBU),a nonsteroidal anti-inflammatory drug,is becoming an important member of pharmaceuticals and personal care products(PPCPs)as emerging pollutants.To degrade IBU,magnetic Fe_3C nanoparticles embedded on N-doped carbon(Fe_3C/NC)were prepared as a catalyst by a sol–gel combustion method.As characterized,the Fe_3C/NC nanoparticles were composed of a NC nano-sheet and capsulated Fe_3C particles on the sheet.The Fe_3C/NC nanoparticles were confirmed an efficient catalyst for peroxymonosulfate(PMS)activation to generate sulfate radicals(SO_4~(·-)),single oxygen(~1O_2)and hydroxyl radicals(·OH)toward the degradation of IBU.The added IBU(10 mg/L)was almost completely removed in 30 min by using 0.1 g/L Fe_3C/NC and 2 g/L PMS.The catalyst was confirmed to have good ability and excellent reusability through leaching measurements and cycle experiments.A catalytic mechanism was proposed for the catalytic activation of PMS on Fe_3C/NC,which involves both Fe_3C reactive sites and N-doped carbon matrix as reactive sites in Fe_3C/NC.Moreover,the degradation pathway of IBU in the Fe_3C/NC-PMS system was proposed according to the detections of degradation intermediates.     

Synthesis,crystal structure,photodegradation kinetics and photocatalytic activity of novel photocatalyst ZnBiYO4

ZnBiYO₄ was synthesized by a solid-state reaction method for the first time. The structural and photocatalytic properties of ZnBiYO₄ were characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy and UV–Vis diffuse reflectance. ZnBiYO₄ crystallized with a tetragonal spinel structure with space group I41/A. The lattice parameters for ZnBiYO₄ were a = b = 11.176479 Å and c = 10.014323 Å. The band gap of ZnBiYO₄ was estimated to be 1.58 eV. The photocatalytic activity of ZnBiYO₄ was assessed by photodegradation of methyl orange under visible light irradiation. The results showed that ZnBiYO₄ had higher catalytic activity compared with N-doped TiO₂ under the same experimental conditions using visible light irradiation. The photocatalytic degradation of methyl orange with ZnBiYO₄ or N-doped TiO₂ as catalyst followed first-order reaction kinetics, and the first-order rate constant was 0.01575 and 0.00416 min^− 1 for ZnBiYO₄ and N-doped TiO₂, respectively. After visible light irradiation for 220 min with ZnBiYO₄ as catalyst, complete removal and mineralization of methyl orange were observed. The reduction of total organic carbon, formation of inorganic products, SO₄^2 − and NO₃⁻, and evolution of CO₂ revealed the continuous mineralization of methyl orange during the photocatalytic process. The intermediate products were identified using liquid chromatography–mass spectrometry. The ZnBiYO₄/(visible light) photocatalysis system was found to be suitable for textile industry wastewater treatment and could be used to solve other environmental chemical pollution problems.     

Photocatalytic degradation of p,p′-DDT under UV and visible light using interstitial N-doped TiO2

1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (or p,p′-DDT) is one of the most persistent pesticides. It is resistant to breakdown in nature and cause the water contamination problem. In this work, a major objective was to demonstrate the application of N-doped TiO₂ in degradation and mineralization of the p,p′-DDT under UV and visible light in aqueous solution. The N-doped TiO₂ nanopowders were prepared by a simple modified sol–gel procedure using diethanolamine (DEA) as a nitrogen source. The catalyst characteristics were investigated using XRD, SEM, TEM, and XPS. The adsorption and photocatalytic oxidation of p,p′-DDT using the synthesized N-doped TiO₂ under UV and visible light were conducted in a batch photocatalytic experiment. The kinetics and p,p′-DDT degradation performance of the N-doped TiO₂ were evaluated. Results show that the N-doped TiO₂ can degrade p,p′-DDT effectively under both UV and visible lights. The rate constant of the p,p′-DDT degradation under UV light was only 0.0121 min^?1, whereas the rate constant of the p,p′-DDT degradation under visible light was 0.1282 min^?1. Under visible light, the 100% degradation of p,p′-DDT were obtained from N-doped TiO₂ catalyst. The reaction rate of p,p′-DDT degradation using N-doped TiO₂ under visible light was sixfold higher than that under UV light. According to Langmuir-Hinshelwood model, the adsorption equilibrium constant (K) for the N-doped TiO₂ under visible light was 0.03078 L mg^?1, and the apparent reaction rate constant (k) was 1.3941 mg L^?1-min. Major intermediates detected during the p,p′-DDT degradation were p,p′-DDE, o,p′-DDE, p,p′-DDD and p,p′-DDD. Results from this work can be applied further for the breakdown of p,p′-DDT molecule in the real contaminated water using this technology.     

基于席夫碱反应合成氮掺杂的碳活化PMS降解双酚A

基于石墨相氮化碳(g-C3N4)的热聚合形成过程和席夫碱反应,本文将尿素和2-萘甲醛作为前驱体,经一步热聚合反应制备了氮掺杂的碳材料(NCN-x),并以其作为催化剂活化过一硫酸盐(PMS)来降解双酚A(BPA).在催化剂特性研究部分,利用SEM、XRD、FTIR以及XPS对其表面形貌、结构与元素组成进行分析.结果 表明...     

具有可见光活性的氮掺杂TiO_2光催化剂的制备及光催化性能

采用浓氨水处理Ti(SO4)2溶液,然后经过滤、干燥、煅烧制备了一种氮掺杂TiO2光催化剂TiO2-XNX,其最佳煅烧温度为400℃。对该光催化剂的XRD谱图进行分析,结果表明,TiO2-XNX的晶型为锐钛矿相。紫外—可见吸收光谱表明,该光催化剂在可见光区具有明显的吸收。甲基橙溶液的降解实验结果表明,制备的TiO2-XNX光催化剂具有可见光(波长λ400nm)活性。     

N-TiO_2/RGO催化剂的制备及其光催化性能的研究

以三乙胺为氮源,HF为形貌控制剂,采用水热法一步合成了N掺杂(001)面锐钛矿TiO_2纳米片/还原氧化石墨烯(N-Ti O2/RGO)复合催化剂,通过XRD、FTIR、SEM、TEM和Raman对样品的组成结构和形貌进行表征。以罗丹明B(Rh B)为模拟污染物,研究了不同掺N量和氧化石墨烯加入量下制备的复合材料的光催化性能。实验结果表明:当n(N)∶n(Ti)为0.5,氧化石墨烯加入量为15 m L时,N-TiO)2/RGO复合材料的光催化性能最好。在催化剂用量为0.5 g/L,罗丹明B溶液初始浓度为20 mg/L时,紫外光催化反应30 min后,罗丹明B的降解率可达94.02%。     

Visible light driven mineralization of spiramycin over photostructured N-doped TiO2 on up conversion phosphors

A novel visible light-active photocatalyst formulation(NdT/OP) was obtained by supporting N-doped TiO_2(NdT) particles on up-conversion luminescent organic phosphors(OP). The photocatalytic activity of such catalysts was evaluated for the mineralization process of spiramycin in aqueous solution. The effect of NdT loading in the range 15–60 wt.% on bulk and surface characteristics of NdT/OP catalysts was investigated by several chemicophysical characterization techniques. The photocatalytic performance of NdT/OP catalysts in the removal of spyramicin from aqueous solution was assessed through photocatalytic tests under visible light irradiation. Total organic carbon(TOC) of aqueous solution,and CO and CO_2 gas concentrations evolved during the photodegradation were analyzed. A dramatic enhancement of photocatalytic activity of the photostructured visible active NdT/OP catalysts,compared to NdT catalyst,was observed. Only CO_2 was detected in gas-phase during visible light irradiation,proving that the photocatalytic process is effective in the mineralization of spiramycin,reaching very high values of TOC removal. The photocatalyst NdT/OP at 30 wt.% of NdT loading showed the highest photocatalytic activity(58%of TOC removed after 180 min irradiation against only 31% removal after 300 min of irradiation of NdT). We attribute this enhanced activity to the high effectiveness in the utilization of visible light through improved light harvesting and exploiting. OP particles act as "photoactive support",able to be excited by the external visible light irradiation,and reissue luminescence of wavelength suitable to promote NdT photomineralization activity.