基于石墨烯构建的电化学传感器在环境监测中的应用

综述了基于石墨烯构建的电化学传感器在重金属、有毒气体、农药残留、酚类有机污染物等对环境造成一定危害的物质检测中的应用,并展望了石墨烯电化学传感器在环境监测领域中的发展。     

Investigation the effect of adding graphene oxide into diesel/higher alcohols blends on a diesel engine performance

ABSTRACT

This article aims to study the influence of the addition of graphene oxide nanoparticles (GO) to diesel/higher alcohols blends on the combustion, emission, and exergy parameters of a CI engine under various engine loads. The higher alcohols mainly n-butanol, n-heptanol, and n-octanol are blended with diesel at a volume fraction of 50%. Then, the 25 and 50 mg/L concentrations of GO are dispersed into diesel/higher alcohols blends using an ultrasonicator. The GO structures are examined using TEM, TGA, XRD and FTIR. The findings show that there is a reduction in p_max. and HRR when adding higher alcohols with diesel fuel. Regarding engine emission, there is a significant improvement in emissions formation with adding higher alcohols. The addition of GO into diesel/higher alcohols blends improves the brake thermal efficiency by 15%. Moreover, the p_max. and HRR are both enhanced by 4%. The CO, UHC and smoke formation are reduced considerably by 40%, 50 and 20%, respectively, while NO_x level is increased by 30% with adding GO. Finally, adding high percentages of n-butanol, n-heptanol, and n-octanol with diesel fuel with the presence of GO has the potential to achieve ultra-low CO, UHC, and smoke formation meanwhile keeping high thermal efficiency level.     

Packed in-tube solid phase microextraction with graphene oxide supported on aminopropyl silica: Determination of target triazines in water samples

On-line in-tube solid phase microextraction (in-tube SPME) coupled to high performance liquid chromatography and tandem mass spectrometry (HPLC-MS/MS) was successfully applied to the determination of selected triazines in water samples. The method based on the employment of a packed column containing graphene oxide (GO) supported on aminopropyl silica (Si) showed that the extraction phase has a high potential for triazines extraction aiming to its physical-chemical properties including ultrahigh specific surface area, good mechanical and thermal stability and high fracture strength. Injection volume and loading time were both investigated and optimized. The method validation using Si-GO to extract and concentrate the analytes showed satisfactory results, good sensitivity, good linearity (0.2–4.0 µg L^?1) and low detection limits (1.1–2.9 ng L^?1). The high extraction efficiency was determined with enrichment factors ranging from 1.2–2.9 for the lowest level, 1.3–4.9 intermediate level and 1.2–3.0 highest level (n = 3). Although the analytes were not detected in the real samples evaluated, the method has demonstrated to be efficient through its application in the analysis of spiked triazines in ground and mineral water samples.     

桉树叶提取液还原石墨烯电极提高微生物燃料电池产电性能的研究

将桉树叶提取液绿色还原氧化石墨烯(G-rGO)电极和微生物还原氧化石墨烯(B-rGO)电极依次作为微生物燃料电池(MFC)阳极,采用红外光谱(FTIR)、X射线衍射(XRD)、扫描电镜(SEM)对所制备的电极进行表征,并采用循环伏安法(CV)、交流阻抗法(EIS)对比2种电极的电化学性能.结果发现,G-rGO阳极的内阻为243.87Ω,应用于MFC时最大功率密度和最大输出电压分别为18.77 W·m~(-3)和760 mV,对照组B-rGO电极的内阻为299.11Ω,将其应用于MFC时最大功率密度和最大输出电压分别为13.16 W·m~(-3)和635 mV,对照组未修饰阳极的内阻为375.21Ω,最大功率密度和最大输出电压分别为8.97 W·m~(-3)和480 mV.研究表明,G-rGO电极电阻更小,导电性能更优越.     

石墨烯复合材料在水处理中的应用研究

新型碳材料石墨烯,因其比表面积大,物理、化学特性优异,通常作为吸附剂或复合材料载体,用于难降解有机废水处理.载体石墨烯改性后,可优化复合材料性能,包括溶解性和可控性.基于复合材料制备,选取典型污染物废水,如染料废水、苯酚废水、农药废水,从吸附处理和催化降解两方面展开,简要介绍石墨烯复合材料的应用研究及作用效果,显示出复合材料可有效提高污染物降解效率,回用效果好.此外,石墨烯复合材料在回用及实际应用方面仍有待进一步研究.     

石墨烯量子点辅助合成Cu-MOFs及CO2吸附行为

选用一种成本低、可大规模合成的Cu基MOFs（Cu-MOFs）材料作为CO₂吸附剂,在原位合成过程中添加石墨烯量子点以调控其晶体结构.结果表明：适量石墨烯量子点的添加有利于提高Cu-MOFs的比表面积和孔体积,相比未改性MOFs材料,改性后的CO₂吸附性能有所提高,25℃,100kPa时提高了4.5%.随着温度升高,吸附容量提升越明显.改性后的MOFs对于N₂的吸附量则比未改性时更低,因此计算得到的CO₂/N₂吸附选择性也更高,增加了近一倍.综合等量吸附热的考察结果发现,尤其添加适量含N石墨烯量子点的Cu-MOFs吸附剂不仅具备了较高的吸附容量、吸附选择性,还展现了较理想的吸附热,因此兼具了较优CO₂吸附性能和较低脱附能耗的特点,为MOFs吸附剂的改性提供了一点参考价值.     

Fast and efficient aqueous arsenic removal by functionalized MIL-100(Fe)/rGO/δ-MnO2 ternary composites: Adsorption performance and mechanism

Because of its significant toxicological effects on the environment and human health,arsenic(As) is a major global issue.In this study,an Fe-based metal-organic framework(MOF)(Materials of Institut Lavoisier:MIL-100(Fe)) which was impregnated with reduced graphene oxide(rGO) by using a simple hydrothermal method and coated with birnessitetype manganese oxide(δ-MnO_2) using the one-pot reaction process(MIL-100(Fe)/rGO/δ-MnO_2 nanocomposites) was synthesized and applied successfully in As removal.The removal efficiency was rapid,the equilibrium was achieved in 40 min and 120 min for As(Ⅲ) and As(Ⅴ),respectively,at a level of 5 mg/L.The maximum adsorption capacities of As(Ⅲ) and As(Ⅴ) at pH 2 were 192.67 mg/g and 162.07 mg/g,respectively.The adsorbent revealed high stability in pH range 2-9 and saturated adsorbent can be fully regenerated at least five runs.The adsorption process can be described by the pseudo-second-order kinetic model and Langmuir monolayer adsorption.The adsorption mechanisms consisted of electrostatic interaction,oxidation and inner sphere surface complexation.     

不同煅烧温度的N-TiO2制备、表征及可见光催化性能

以钛酸丁酯为钛源,氯化铵为氮源,采用溶胶-凝胶法,不同煅烧温度条件制备N掺杂TiO2纳米材料,采用X射线粉末衍射(XRD)、傅里叶变换红外(FT-IR)、扫描电镜(SEM)、紫外-可见漫反射(UV-Vis DRS)手段对其进行表征,并通过降解腐殖酸(HA)实验,探讨N-TiO2可见光催化性能。结果表明,制备的光催化纳米材料为锐钛矿相,TiO2光响应范围可拓宽到可见光区;煅烧温度是影响可见光催化活性的重要因素,350℃煅烧的N-TiO2可见光催化活性最佳,光反应140 min后,对初始浓度为5 mg/L的HA溶液降解率达80.32%,光催化反应过程符合准一级动力学,煅烧温度过高或过低,动力学反应速率常数呈现不同程度的减小,降解反应速率明显下降。     

IL/GO/88A的制备及其对四环素的光催化降解性能

使用离子液体(ILs)辅助生长新型光催化材料IL/GO/88A用于降解四环素(TC),使用XRD、FTIR、SEM、N₂吸附-脱附、UV-vis、EIS等方法分别对催化材料进行了表征分析,考察了催化剂投加量、pH、TC浓度对TC降解的影响。该复合材料表现出高效的TC降解效率。在催化剂投加量为0.30 g·L⁻¹、pH为5.7、TC溶度为10 mg·L⁻¹的条件下,光照180 min后,IL/GO/88A对TC的去除率达到95.7%。催化剂在重复利用3次后仍能保持稳定的性能。此外,阐明了吸附-光催化协同机理,并推断·OH、h⁺是主要的活性物种。本研究结果对开发高效MOFs光催化复合材料并用于处理含四环素废水提供了新思路。     

Cu/ZnO-RGO的抗菌性能及应用

采用溶胶-凝胶法制备铜锌复合氧化物（Cu/ZnO）,并将Cu/ZnO纳米粒子负载到还原氧化石墨烯（RGO）表面制备Cu/ZnO-RGO复合材料.对Cu/ZnO-RGO复合材料进行表征分析及抗菌性能考察,结果表明,Cu/ZnO纳米粒子成功负载在RGO表面,负载前后Cu/ZnO纳米粒子形态不发生改变,复合材料纯度较高.Cu/ZnO-RGO复合材料对大肠杆菌与金黄色葡萄球菌均有着优异的抗菌性能,可以破坏细菌细胞膜,导致细菌内容物流出,延长细菌进入对数生长期所需的时间.当RGO质量分数为15%?Cu/ZnO-RGO复合材料使用量为120μg/mL时,在循环冷却水系统中作用2h即可拥有96.76%的抗菌率.