Treatment of dye‐containing wastewater by sequencing batch reactor with powdered activated carbon addition

The process involving the combination of powdered activated carbon (PAC) and biomass in the aeration basin of conventional continuous‐flow activated sludge system, known as the PACT process, has proven to be effective for treating toxic pollutants present in industrial wastewaters. In view of the many advantages of sequencing batch reactors (SBR) operationally, the objective of this study is to evaluate the PACT process under SBR operation to treat wastewater containing Acid Blue 25 (AR) and Basic Yellow 2 dyes (BR). The SBR systems were operated with FILL, REACT, SETTLE and DRAW periods in the ratio of 0.25:3.75: 1.0:1.0 for a cycle time of 6 h. The average COD and AR removal efficiencies were 89% and 93%, respectively with PAC addition compared to 76% and 7%, respectively, without PAC addition. In the case of BR, the average removal efficiencies of COD and dye increased from 52% and 9% to 90% and 93%, respectively, with PAC addition. Kinetic study conducted for the REACT period showed that both dyes exhibited a very pronounced inhibitory effect on the activities of the microorganisms. The addition of PAC was capable of reducing the inhibitory effect of only BR but not AR on the microorganisms.     

酸性染料的臭氧降解与中间产物

以酸性金黄G模拟染料废水为研究对象,观察臭氧氧化过程中染料溶液吸光度和TOC的变化,利用离子色谱仪、红外光谱仪和GC/MS对染料的降解过程进行了分析,并用发光细菌法检测了溶液急性毒性的变化,结果表明,臭氧对染料的降解符合一级反应动力学,反应40 min后染料溶液的脱色率达到99.3%,TOC去除率为35.7%;染料分子中的S有97.8%被转化为SO2-4,分子中的仲胺基部分转化成酰胺基,水解后生成NH+4,最终氧化成NO-3,溶液中有草酸产生;溶液在臭氧化前期由于生成了醛类和酚类物质,使急性毒性首先呈上升趋势,25min后随着氧化的深入,溶液毒性开始逐渐下降,     

抗除草剂转基因作物实时荧光定量PC检测

建立了一种以SYBR Green Ⅰ为结合染料、快速准确检测转抗除草剂基因成分的实时荧光定量PCR方法.以转基因大豆与转基因玉米标准品为材料,通过使用特异性引物和SYBR Green Ⅰ结合染料实时荧光定量PCR技术,对转基因农作物中外源抗除草剂基因进行了定量检测,绘制了两种基因扩增的标准曲线图,根据标准曲线方程计算外源基因含量;并作了溶解曲线、检测方法检测灵敏度和精密度的分析.研究发现,两者标准曲线方程线性关系良好.R~2 值分别达到0.993 9与0.992 4.通过已知标准品进行验证,实测值与真值接近,与实际含量的相埘偏差是6.52%和7.90%.结果表明,SYBR Green Ⅰ结合染料法完全可以用于转基因农作物定量PCR检测.图5表2参11     

Boron removal from produced water using electrocoagulation

Produced water is the largest wastestream of oil and gas exploration but its chemical composition hinders its beneficial use. Effective treatment and reuse of produced water can mitigate scarcity of fresh water, especially in arid areas. Presence of inorganic compounds such as boron in produced water renders its beneficial use difficult. In this study, boron removal from produced water was investigated. Synthetic wastewater was prepared simulating the range of boron concentrations in produced water. Four operating parameters pH (3–11), charge loading (1200–3600 Ah/m³), contact time (15–90 min) and concentration (10–30 mg/L) were selected and their optimum conditions investigated. The obtained optimum conditions were applied to treat real produced water. Residual boron concentration of 0.3 mg/L was obtained from initial boron concentration of 15 mg/L in real produced water at optimum conditions of pH 7, charge loading 2400 Ah/m³ and contact time 90 min. Boron adsorption could be represented by Langmuir and Freundlich isotherm models. Electrocoagulation can be used for the effective removal of boron from produced water.     

车用LNG气瓶的定期检验技术

针对车用液化天然气（LNG）气瓶定期检验的特殊要求,制定出定期检验项目及相应的检验方法。重点对车LNG气瓶静态蒸发率的测试方法进行研究,并给出评判标准。研究成果为车用LNG气瓶的安全应用提供保障,为车用LNG气瓶定期检验标准的制定提供理论依据。     

改性腐殖酸对铀的吸附的试验研究

通过静态吸附实验,探讨了改性HA对U(Ⅵ)吸附影响。考查pH值、时间、U(Ⅵ)的初始浓度和温度等对吸附的影响。结果表明:pH值对改性腐殖酸的吸附效果影响较大,改性腐殖酸吸附U(Ⅵ)的最佳pH值为6,最大去除率为99.37%,吸附在60 min内基本达到平衡。UO22+在改性腐殖酸上的吸附是放热过程,符合Freundlich等温吸附方程,相关系数达0.99以上,表明IHA对铀的吸附是以表面为主要吸附位,并不是均匀的单层吸附。图8,参9.     

Investigation of phosphate adsorption from an aqueous solution using spent fluid catalytic cracking catalyst containing lanthanum

A spent fluid catalytic cracking (FCC) catalyst containing lanthanum (La) was used as a novel adsorbent for phosphorus (P) in simulated wastewater. The experiments were conducted in a batch system to optimize the operation variables, including pH, calcination temperature, shaking time, solid-liquid ratio, and reaction temperature under three initial P-concentrations (C₀ = 0.5, 1.0, and 5.0 mg/L). Orthogonal analysis was used to determine that the initial P-concentration was the most important parameter for P removal. The P-removal rate exceeded 99% and the spent FCC catalyst was more suitable for use in low P-concentration wastewater (C₀ <5.0 mg/L). Isotherms, thermodynamics and dynamics of adsorption are used to analyze the mechanism of phosphorus removal. The results show that the adsorption is an endothermic reaction with high affinity and poor reversibility, which indicates a low risk of second releasing of phosphate. Moreover, chemical and physical adsorption coexist in this adsorption process with LaPO₄ and KH₂PO₄ formed on the spent FCC catalyst as the adsorption product. These results demonstrate that the spent FCC catalyst containing La is a potential adsorbent for P-removal from wastewater, which allows recycling of the spent FCC catalyst to improve the quality of water body.

Open image in new window

     

纳米铜复合材料催化还原染料废水的研究

以铜的有机金属框架为铜源前驱物,酚醛树脂为碳源,合成了多孔碳层支撑的Cu/Cu2O/C非贵金属复合材料.负载的Cu/Cu2O颗粒粒径在40nm左右,多孔碳层的高孔隙结构有利于Cu/Cu2O颗粒与目标物充分接触.将Cu/Cu2O/C作为催化剂用于水中多种染料类污染物(邻硝基苯、亚甲基蓝和罗丹明B)的催化还原反应中,材料重复利用5次后,目标物的降解率仍在99%以上,催化剂表现出了良好的催化活性和稳定性.     

接枝羧基淀粉对贵金属离子吸附性能研究

研究了接枝羧基淀粉（ＩＳＣ）对贵金属离子Ａｇ（Ⅰ）,Ｐｄ（Ⅱ）、Ｐｔ（Ⅳ）的静态吸附性能和选择性及介质的ＰＨ对其吸附性能的影响,利用接枝羧基淀粉与Ａｇ（Ⅰ）形成螯合物的红外光谱和Ｘ－射线光电子能谱数据（ＸＰＳ）探讨了其吸附作用机理。     

Fenton试剂与染料溶液的反应

Ｆｅｎｔｏｎ试剂与酸性、活性、直接、阳离子、分散和还原６类１８种染料反应进,前４类染料在１８０ｍｉｎ内完全脱色,ＴＯＣ浓度均显著下降。后２类染料的脱色率很低,ＴＯＣ浓度降低不多,研究了不同金属离子与此外光的催化下,Ｔ２Ｏ２对染料罗丹明Ｂ溶液的氧化反应。催化的结果为：Ｆｅ＾２／ＵＶ〉Ｃｕ＾２＋／ＵＶ〉Ｆｅ＾２＋〉Ｃｕ＾２＋〉Ｍｕ＾２＋／ＵＶ〉Ａｇ＾＋／ＵＶ〉Ｍｎ＾２＋〉Ａｇ＾＋,通过与还原蓝ＲＳＮ溶