碳钢在高温高盐矿井水中腐蚀与缓蚀性能的试验研究

为了解决高温高盐矿井水对碳钢管道和设备腐蚀问题,进行了缓蚀挂片试验,研究适应该类水质的缓蚀剂种类和最佳投加量。试验结果表明：软化剂氢氧化钙和碳酸钠对碳钢均有一定缓蚀效果．其平均缓蚀率分别为17．33％、57．46％。因此药剂软化过程同时达到防腐效果有限：单独投加缓蚀剂HEDP的缓蚀效果明显,其静态缓蚀率82．46％以上,动态缓蚀率76．45％：复合配方缓蚀剂的缓蚀效果最好,最佳配方为“有机膦酸一聚环氧琥珀酸一锌盐”或“有机膦酸一磺酸基团多元共聚物一锌盐”,在投加量80mg／L时动态缓蚀率接近90％。     

使用量和单位常见错误浅析

以《量和单位》（GB3100—3102-1993）为依据,列举了各种常见的错误使用量和单位的名称和符号、量和单位非标准化的例子,对其进行了分析和探讨,提出标准化对策。     

型煤产业发展与提高

本文论述发展工业型煤产业的重要意义和技术质量保证,洁净煤技术是控制污染和节约能源,提高煤炭资源利用率的重要技术项目,将粉煤生产成型煤,为工业、民用提供洁净的燃料,既充分利用煤炭资源同时改善能源结构,又有显著的环保效益,国家把煤炭产业列入中国洁净煤技术有限发展项目,目前制约型煤产业的发展要造气型和燃烧型煤并举,同时有利于用户的节能效益。     

青岛华威风电场风能资源分析

根据华威风电场2008年4月1日-2009年3月31日一整年的测风仪测风资料,对风电场的风能资源各参数进行了详细地计算和分析,对风电场的风能资源进行评价,为当地的风能开发提供分析基础。     

鄂尔多斯节能减排现状及建议

鄂尔多斯作为典型资源型城市,资源性产业在国民经济中长期占据主导地位,因此节能减排任务十分艰巨。本文分析总结了“十一五”以来鄂尔多斯市节能减排取得的成效及采取的主要措施,并在此基础上提出了几点建议。     

电动交通工具的污染减排及对策

燃油交通工具是城市温室气体的重要来源之一,因此使用电动交通工具成为解决城市污染减排的重要措施.文章就正确认识电动交通工具污染减排的作用,蓄电池的生产管理、回收利用等进行了讨论,并提出了相应的对策和建议.     

梨树县农业生态环境的分析与建议

生态保护的重点是保护自然资源及由其组成的各类生态系统,预防环境污染和生态破坏,改善和恢复生态系统的环境功能,维护生态平衡。我县工业发展迅速,生态环境面临的压力不断加大,为改善其生态环境现状及存在问题,提出对策与建议,以实现全县经济社会的可持续发展。     

菌株Desulfovibrio sp. CMX的DNRA性能和影响因素

微生物的硝酸盐异化还原为铵(DNRA)过程对自然界中铵根离子的存在和转化具有重要影响,然而关于SRB菌株DNRA过程影响和机制尚未探明.本文考察了实验室筛选的SRB菌株Desulfovibrio sp.CMX的DNRA能力、影响因素及其影响机制.结果表明,无外加氮源的情况下,分别以10 mmol·L-1NO_3~-和NO_2~-作为唯一电子受体,菌株Desulfovibrio sp.CMX最终NH_4~+生成率分别达到85.8%和97.3%,且无N2和N2O等副产物产生.实验探究了不同外加氮源、不同初始浓度的SO_4~(2-)、S~(2-)对菌株DNRA过程的影响.酵母浸粉作为外加氮源可促进菌株的生长和代谢从而促进菌株DNRA过程;SO_4~(2-)对于NO_3~-还原为NO_2~-阶段起促进作用,而对NO_2~-还原为NH_4~+阶段起抑制作用,综合两方面影响,最终表现出对菌株DNRA过程的抑制作用;S~(2-)对菌株生长及DNRA过程都表现出抑制作用,且S~(2-)浓度越高抑制作用越强,当S~(2-)浓度达到6 mmol·L-1后,S~(2-)对于NO_3~-还原为NO_2~-阶段的抑制作用强于NO_2~-还原为NH_4~+阶段的抑制作用,NO_3~-还原为NO_2~-速率低于NO_2~-还原为NH_4~+速率,此时体系中不再有NO_2~-的积累.     

Catalytic bubble-free hydrogenation reduction of azo dye by porous membranes loaded with palladium nanoparticles

Catalytic bubble-free hydrogenation reduction of azo dye by porous membranes loaded with palladium （Pd） nanoparticles was studied for the first time. The effects of Pd loading, dye concentration and reuse repetitions of membranes were investigated. In reduction, the dye concentration decreased whereas the pH rose gradually. An optimal Pd loading was found. The catalytic membranes were able to be reused more than 3 times.     

Effects of metal and acidic sites on the reaction by-products of butyl acetate oxidation over palladium-based catalysts

Catalytic oxidation is widely used in pollution control technology to remove volatile organic compounds. In this study, Pd/ZSM-5 catalysts with different Pd contents and acidic sites were prepared via the impregnation method. All the catalysts were characterized by means of N2 adsorption- desorption, X-ray fluorescence （XRF）, HE temperature programmed reduction （H2-TPR）, and NH3 temperature programmed desorption （NH3-TPD）. Their catalytic performance was investigated in the oxidation of butyl acetate experiments. The by-products of the reaction were collected in thermal desorption tubes and identified by gas chromatography/mass spectrometry. It was found that the increase of Pd content slightly changed the catalytic activity of butyl acetate oxidation according to the yield of CO2 achieved at 90%, but decreased the cracking by-products, whereas the enhancement of strong acidity over Pd-based catalysts enriched the by-product species. The butyl acetate oxidation process involves a series of reaction steps including protolysis, dehydrogenation, dehydration, cracking, and isomerization. Generally, butyl acetate was cracked to acetic acid and 2- methylpropene and the latter was an intermediate of the other by-products, and the oxidation routes of typical by-products were proposed. Trace amounts of 3-methylpentane, hexane, 2-methylpentane, pentane, and 2-methylbutane originated from iso4merization and protolysis reactions.