Abundance and removal of antibiotic resistance genes (ARGs) in the rearing environments of intensive shrimp aquaculture in South China

Although research regarding antibiotic resistance genes (ARGs) in aquaculture environments has gained increasing scientific interest, further studies are required to understand the abundances and removal mechanisms of ARGs during the entire rearing period of shrimp aquaculture. Thus, in this study, abundances, distributions and removal rates of ARGs in different environmental compartments of intensive shrimp farms in South China were investigated during the entire rearing period. The results indicated that sul1 and cmlA were the predominant ARGs in the water and sediment samples. Additionally, the total abundance of ARGs was higher in shrimp pond water than in the source water and farm effluent. Moreover, sediment samples indicated significantly higher ARG abundances than water samples from the shrimp ponds (P?<?0.05). Environmental factors were found to significantly affect the distribution of ARGs in shrimp rearing environments. Furthermore, stable ponds aided the removal of ARGs from shrimp pond water. This study accounted for temporal variations in ARG abundances as well as removal of ARGs in different environmental compartments during the entire shrimp rearing period. However, additional research is required to optimize the water treatment process for removal of ARGs from the aquaculture.     

IC反应器处理MTO废水的中试研究

中试研究了内循环(IC)反应器处理甲醇制烯烃(MTO)废水的启动和运行过程,同时考察了颗粒污泥的性状及沼气产量的变化情况。试验过程运行稳定,系统抗冲击性强。以絮状污泥为接种污泥,经过131 d的启动和运行,IC反应器的COD去除负荷可达10 kg/(m~3·d)以上,COD去除率可达90%以上。IC反应器中的成熟颗粒污泥形状规则、密实、粒径大、沉降速率快。IC反应器的沼气产量符合理论预期。     

Direct methanol fuel cell bubble removal mechanism using magnetic actuation

This article develops a direct methanol fuel cell (DMFC) with a magnet-actuated bubble removal mechanism. A micro-DC motor is used to control the bubble removal mechanism. The lower magnetic device is operated to extrude a Polydimethylsiloxane (PDMS) runner to compress the liquid fuel in the anode flow channel, forcing the CO₂ bubbles in the runner to flow toward the outlet end. The bubble retention in the anode flow channel is thereby improved, enhancing the cell performance. The proposed mechanism stability and performance and Polymethylmethacrylate (PMMA) runner are also discussed.     

Characterization of aluminium-based water treatment residual for potential phosphorus removal in engineered wetlands

Aluminium-based water treatment residual (Al-WTR) is the most widely generated residual from water treatment facilities worldwide. It is regarded as a by-product of no reuse potential and landfilled. This study assessed Al-WTR as potential phosphate-removing substrate in engineered wetlands. Results indicate specific surface area ranged from 28.0 m² g⁻¹ to 41.4 m² g⁻¹. X-ray Diffraction, Fourier transform infrared and energy-dispersive X-ray spectroscopes all indicate Al-WTR is mainly composed of amorphous aluminium which influences its phosphorus (P) adsorption capacity. The pH and electrical conductivity ranged from 5.9 to 6.0 and 0.104 dS m⁻¹ to 0.140 dS m⁻¹ respectively, showing that it should support plant growth. Batch tests showed adsorption maxima of 31.9 mg P g⁻¹ and significant P removal was achieved in column tests. Overall, results showed that Al-WTR can be used for P removal in engineered wetlands and it carries the benefits of reuse of a by-product that promotes sustainability.     

Cu^2＋、Zn^2＋对生物脱氮系统的影响

Cu^2＋和Zn^2＋是污水处理工艺中经常遇到的金属离子。在驯化好的活性污泥系统中,研究了金属离子Cu^2＋和Zn^2＋在0～100mg／L浓度下对活性污泥生物脱氮系统的影响。试验发现Cu^2＋＞5mg／L、Zn^2＋＞30mg／L时,对硝化过程具有明显的抑制作用,在同样浓度的试验条件下cu“对硝化过程的抑制作用比Zn^2＋大。Cu^2＋≤0．5mg／L时对反硝化过程具有一定的促进作用,有助于提高TN的去除效果;Cu^2＋＞0．5mg／L时,对反硝化产生抑制作用,随着浓度的增加,TN去除率逐渐下降。Zn^2＋不影响反硝化过程,仅在大于30mg／L时,对硝化过程产生抑制作用。重金属Cu^2＋对生物脱氮系统的影响明显强于Zn^2＋。     

聚合氯化铝铁去除微污染水体中藻类的研究

以聚合氯化铝铁(PAFC)为絮凝剂,H2O2为预氧化剂,用正交实验研究了PAFC处理微污染水体中藻类和降低浊度,得出正交实验中各因素的主次关系及对除藻和除浊度的影响,研究表明,ρPAFC是影响除藻和除浊度的重要因素.在最佳处理条件,即ρPAFC为20 mg/L,ρH2O2为6 mg/L,pH为7,搅拌时间为4 min,能使水体中藻细胞街度从9.4×107 cells/L降至3.16×106 cells/L,除藻率为96.6%,浊度降至0.70 NTU,除浊度率达93.0%.     

硝酸盐对反硝化除磷过程的影响分析

在厌氧/缺氧间歇反应器内考察了硝酸盐进水浓度及进水方式对反硝化除磷过程的影响。结果表明：在缺氧阶段,反硝化除磷菌(DPBs)可将硝酸盐转化为亚硝酸盐,当硝酸盐浓度较低时,DPBs以亚硝酸盐为电子受体吸磷。进水COD浓度为220 mg/L,正磷浓度为6.8 mg/L,硝酸盐初始浓度为26 mg/L时,系统达到最佳脱氮除磷效果,期间亚硝酸盐浓度积累至10.71 mg/L。采用连续流投加硝酸盐的方式更利于氮磷的高效去除。     

Cu~(2+)、Zn~(2+)对生物脱氮系统的影响

Cu2+和Zn2+是污水处理工艺中经常遇到的金属离子.在驯化好的活性污泥系统中,研究了金属离子Cu2+和Zn2+在0～100 mg/L浓度下对活性污泥牛物脱氮系统的影响.试验发现Cu2+＞5 mg/L、Zn2+＞30 ms/L时,对硝化过程具有明显的抑制作用,在同样浓度的试验条件下Cu2+对硝化过程的抑制作用比Zn2+大.Cu2+≤0.5 mg/L时对反硝化过程具有一定的促进作用,有助于提高TN的去除效果;Cu2+＞0.5 mg/L时,对反硝化产牛抑制作用,随着浓度的增加,TN去除率逐渐下降.Zn2+不影响反硝化过程,仅在大于30 mg/L时,对硝化过程产生抑制作用.重金属Cu2+对生物脱氮系统的影响明显强于Zn2+.     

微曝气Fenton氧化法处理模拟双酚A废水的效果及其生物验证

研究了微曝气Fenton氧化法关键工艺参数对模拟双酚A（BPA）废水处理效果的影响,并从活性污泥性质和污染物去除率两方面,采用膜生物反应器(membrane bioreactor, MBR)对微曝气Fenton氧化法的处理效果进行了实验验证,为实现BPA废水的生物处理奠定基础。结果表明,初始pH值、反应时间、H₂O₂/COD(质量浓度比)、H₂O₂/Fe²⁺ (摩尔浓度比)、反应温度及曝气量均对预处理效果有较大影响,在最佳条件下,COD去除率可达70%,BOD/COD值则由原废水的0.02提高到0.50以上。MBR处理上述出水的结果表明,经微曝气Fenton氧化处理BPA的废水,可较好地适应后续的生化处理。