ABR-MBR一体化工艺节能降耗措施优化研究

能耗高和膜污染是限制膜生物反应器(MBR)广泛应用的重要因素.为降低工艺运行能耗和延缓膜污染,以厌氧折流板反应器(ABR)-MBR工艺处理生活污水为例,对工艺结构和脱氮除磷运行条件进行优化.结果表明,通过优化ABR-MBR工艺结构,可降低43%的运行能耗,同时可保持较高的COD、NH+4-N、TN和TP去除效果,平均去除率分别为91%、85%、76%和86%.另外,添加颗粒填料可有效延缓膜污染,不过也改变了膜污染的形成过程,膜内部污染物含量显著增多,碳水化合物含量增加,而蛋白质含量减少,碳水化合物/蛋白质比明显增大.最终,增强了MBR反应器的实际应用性能.     

Early Vegetation Development on an Exposed Reservoir: Implications for Dam Removal

The 4-year drawdown of Horsetooth Reservoir, Colorado, for dam maintenance, provides a case study analog of vegetation response on sediment that might be exposed from removal of a tall dam. Early vegetation recovery on the exposed reservoir bottom was a combination of (1) vegetation colonization on bare, moist substrates typical of riparian zones and reservoir sediment of shallow dams and (2) a shift in moisture status from mesic to the xeric conditions associated with the pre-impoundment upland position of most of the drawdown zone. Plant communities changed rapidly during the first four years of exposure, but were still substantially different from the background upland plant community. Predictions from the recruitment box model about the locations of Populus deltoides subsp. monilifera (plains cottonwood) seedlings relative to the water surface were qualitatively confirmed with respect to optimum locations. However, the extreme vertical range of water surface elevations produced cottonwood seed regeneration well outside the predicted limits of drawdown rate and height above late summer stage. The establishment and survival of cottonwood at high elevations and the differences between the upland plant community and the community that had developed after four years of exposure suggest that vegetation recovery following tall dam removal will follow a trajectory very different from a simple reversal of the response to dam construction, involving not only long time scales of establishment and growth of upland vegetation, but also possibly decades of persistence of legacy vegetation established during the reservoir to upland transition.     

Color removal from dye-containing wastewater by magnesium chloride

Color removal by MgCl(2) when treating synthetic waste containing pure dyes was studied. The color removal efficiency of MgCl(2)/Ca(OH)(2) was compared with that of Al(2)(SO(4))(3), polyaluminum chloride (PAC) and FeSO(4)/Ca(OH)(2). The mechanism of color removal by MgCl(2) was also investigated. The experimental results show that the color removal efficiency of MgCl(2) is related to the type of dye and depends on the pH of the waste and the dosage of the coagulants used. Treatment of waste containing reactive dye or dispersed dye with MgCl(2) yielded an optimum color removal ratio when the pH of the solution was equal to or above 12.0. For both the reactive and dispersed dye waste, MgCl(2)/Ca(OH)(2) was shown to be superior to MgCl(2)/NaOH, Al(2)(SO(4))(3), PAC and FeSO(4)/Ca(OH)(2) for color removal. A magnesium hydroxide precipitate formed at pH values greater than 12.0, which provided a large adsorptive surface area and a positive electrostatic surface charge, enabling it to remove the dyes through charge neutralization and an adsorptive coagulating mechanism. So, the MgCl(2)/Ca(OH)(2) system is a viable alternative to some of the more conventional forms of chemical treatment, especially for treating actual textile waste with high natural pH.     

燃煤锅炉NID脱硫系统的设计与应用

介绍了新型一体化NID半干法脱硫系统的工艺原理、NID技术特点、系统组成、设计参数和运行情况.     

酵母生物转化生产2-苯乙醇的研究进展

主要论述了利用酵母菌生物转化合成天然2苯乙醇的研究进展,从应用微生物学的角度介绍了2苯乙醇生产菌株的筛选,分析了2苯乙醇合成过程中几方面因素的影响和培养条件的选择,并对产物原位转移技术作了简要说明.并从分子生物学的角度出发,对生物转化的重点途径———艾利希途径在基因水平上作了诠释,且例举了利用从头合成途径进行的基因工程育种,旨在为利用微生物生产2苯乙醇的研究开发提供参考.图1参40     

Evaluating peats for their capacities to remove odorous compounds from liquid swine manure using headspace “solid‐phase microextraction”

Abstract

This paper reports on research designed to investigate the capacities of different highly characterized peats to remove odorous compounds from liquid swine manure (LSM). Peat types representing a wide range of properties were tested in order to establish which chemical and physical properties might be most indicative of their capacities to remediate odors produced by LSM. Eight percent slurries (of peat/LSM) were measured for odor changes after 24 hours using odor panel and GC/MS‐Solid‐phase microextraction (GC/MS‐SPME) analysis.

The GC/MS‐SPME and odor panel results indicated that, although all peats tested in this study were found to be effective at removing odor‐causing compounds found in LSM, some peats tended to work better than others. Overall, the peats that were the most effective at removing odor‐causing compounds tended to have lower bulk densities, ash contents, fulvic acids contents, and guaiacyl lignins contents,and higher water holding capacities, hydraulic conductivities, “total other lignins”; contents, hydrogen contents, carbon contents, and total cellulose contents.

GC/MS‐SPME analysis was found to be a reasonably inexpensive and efficient way of conducting this type of research. It allows one to identify a large number of the odor‐causing compounds found in LSM, and more importantly, to detect with some precision specific differences in the amounts of these compounds between peat types.     

Fabric-filter-supported catalyst for removal of harmful solid and gaseous compounds in municipal waste incinerator exhaust gas: characteristics of NO x reduction

We have investigated a fabric-filter-supported catalyst for removing harmful solid and gaseous compounds simultaneously from municipal incinerator exhaust gas. We studied the ways in which the efficiency of NO _x removal is influenced by filter temperature, gas flow rate, and catalyst content. The reduction of the catalyst content by mechanical reverse washing was investigated, and the state of the catalyst supported in the fabric filter was also observed using a scanning electron microscope. The catalyst supported by the fabric filter showed a removal efficiency above 75% when the filter temperature was 200°C, the gas flow rate was 1 m/min, and the catalyst content of the fabric filter was above 300 g/m². The catalyst was supported uniformly on the fibers of the fabric filter, and fine catalyst particles remained on the fibers after mechanical reverse washing. Received: October 15, 1997 / Accepted: March 19, 1999     

利用声凝聚机理提高喷雾降尘效果的研究

本文论述了利用声凝聚机理提高喷雾降尘效果,特别是对呼吸尘的降尘效果的研究过程。由该机理建立了声波频率和声强与降尘效果之间的数学模型。在此数学模型的基础上,开展了对声波发生器和声学喷嘴的研究。实验及使用结果表明,声学喷嘴可以显著提高对呼吸尘的降尘效果。     

吸附法处理含铬废水的研究

天然沸石、膨润土基材经镁铝等修饰并活化而制的ＦＭＡ，ＢＭＡ吸附剂处理含铬废水，铬的去除率可达９９％。     

An Approach for Estimating Soil Carbon Using the National Nutrient Loss Database

Agricultural lands have the potential to contribute to greenhouse gas mitigation by sequestering organic carbon within the soil. Credible and consistent estimates will be necessary to design programs and policies to encourage management practices that increase carbon sequestration. Because a nationwide survey of soil carbon by the wide range of natural resources and management conditions of the United States is prohibitively expensive, a simulation modeling approach must be used. The National Nutrient Loss Database (NNLD) is a modeling and database system designed and built jointly by the USDA– Natural Resources Conservation Service (NRCS) and Texas A&M University to provide science-based inferences on environmental impacts from changes in agricultural management practices and programs at the regional and national level. Currently, the NNLD simulates 16 crops and covers 1.35 × 10⁸ ha. For estimating soil carbon sequestration, the database will be populated with 1.5 × 10⁶ field-level model runs using the EPIC (Environmental Policy Impact Calculator) model, which includes newly incorporated carbon equations consistent with those in the Century model. Each run will represent a unique situation defined by state, crop, climate, soil, irrigation type, conservation practice, tillage system, and nutrient management treatment (nutrient rate, application frequency, application timing, and manure category). Results are to be assigned to specific National Resource Inventory points (NRI) to simulate regional and national baselines. In this article we present the modeling approach and discuss the strengths and limitations. Published online