Enhanced triallyl isocyanurate (TAIC) degradation through application of an O3/UV process: Performance optimization and degradation pathways

• UV/O₃ process had higher TAIC mineralization rate than O₃ process. • Four possible degradation pathways were proposed during TAIC degradation. • pH impacted oxidation processes with pH of 9 achieving maximum efficiency. • CO₃^2– negatively impacted TAIC degradation while HCO₃^– not. • Cl^– can be radicals scavenger only at high concentration (over 500 mg/L Cl^–). Triallyl isocyanurate (TAIC, C₁₂H₁₅N₃O₃) has featured in wastewater treatment as a refractory organic compound due to the significant production capability and negative environmental impact. TAIC degradation was enhanced when an ozone(O₃)/ultraviolet(UV) process was applied compared with the application of an independent O₃ process. Although 99% of TAIC could be degraded in 5 min during both processes, the O₃/UV process had a 70%mineralization rate that was much higher than that of the independent O₃ process (9%) in 30 min. Four possible degradation pathways were proposed based on the organic compounds of intermediate products identified during TAIC degradation through the application of independent O₃ and O₃/UV processes. pH impacted both the direct and indirect oxidation processes. Acidic and alkaline conditions preferred direct and indirect reactions respectively, with a pH of 9 achieving maximum Total Organic Carbon (TOC) removal. Both CO₃^2– and HCO₃^– decreased TOC removal, however only CO₃^2– negatively impacted TAIC degradation. Effects of Cl^– as a radical scavenger became more marked only at high concentrations (over 500 mg/L Cl^–). Particulate and suspended matter could hinder the transmission of ultraviolet light and reduce the production of HO· accordingly.     

高效液相色谱串联质谱法测定某市污水处理厂进出水中的全氟化合物

通过建立直接进样-高效液相色谱串联质谱（HPLC-MS/MS）测定污水处理厂进出水中的10种全氟化合物的方法,了解污水厂进出水中全氟化合物污染情况。10种目标分析物在10~500 ng/L范围内具有良好的线性关系,方法检出限为2.3~8.3 ng/L,精密度为2.1%~7.1%,加标回收率为60.6%~91.7%。应用该方法测定某市典型污水厂进出水中的全氟化合物,进水中全氟化合物质量浓度为90.9~206 ng/L,主要污染物是PFOA、PFHxS和PFBS;出水中全氟化合物的质量浓度为67.4~158 ng/L,环境排放量为6.7~22.9 g/d,主要污染物是PFOA和PFHxS。结果表明,该方法能很好地适用于复杂基质中10种全氟化合物的检测。     

固相萃取-超高效液相色谱/三重四极杆质谱法同时测定地表水中8种亚硝胺类化合物

建立了固相萃取（SPE）-超高效液相色谱/三重四极杆串联质谱（UPLC-MS/MS）同时测定地表水中8种亚硝胺类化合物的方法。水样中目标物经椰壳活性炭固相萃取小柱吸附富集,小柱经氮气吹干后采用二氯甲烷洗脱。待测样品采用Atlantis T₃柱,以水-甲醇作为流动相进行梯度洗脱,大气压力化学电离源（APCI）正离子模式多反应监测方式（MRM）进行检测,内标法定量分析。8种目标物在相关线性范围内线性良好(r≥0.9950),地表水加标回收率为55.4%~90.4%,相对标准偏差为3.1%~14.3%,方法检出限为1.1 ~1.8 ng/L。本方法准确度和灵敏度高,适用于快速测定地表水中8种亚硝胺类化合物含量。     

Determination of Steroid Estrogens in Wastewater Treatment Plant of A Controceptives Producing Factory

Steroid estrogens such as estrone (E1), 17β-estradiol (E2), estriol (E3), and 17α-ethynylestradiol (EE2) have been suspected to be the main contaminants, which can affect the endocrine system of animals. Many authors have investigated these chemicals in the domestic wastewater treatment plants (WTP). However, wastewater from industries producing steroid contraceptives has not got ample attention. From the environmental point of view, the four steroids are very significant because even very low concentrations (ng/L) can cause reproductive disturbances in human, livestock and wildlife. The main purpose of the present investigation was to develop an analytical method for the determination of the four steroid estrogens present in WTP of a pharmacy factory, mainly producing contraceptive medicine in Beijing, China. Analysis was performed by solid-phase extraction (SPE) system and liquid chromatography combined with tandem mass spectrometry (LC/MS/MS). The average recoveries from effluent samples ranged from 88% to 103% and the precision of the method ranged from 9% to 4%. Based on 0.5-L wastewater samples, the limit of quantification (LOQ) was determined at 0.7 ng/L for E1, 0.8 for E2, 0.9 ng/L for E3, and 0.5 ng/L for EE2 in influent, and 1.0 ng/L for E2 and EE2, and 2.0 ng/L for E1 and E3 in effluent. In the influent samples, average concentrations of 80, 85, 73 and 155 ng/L were determined for E1, E2, E3 and EE2, respectively, showing that they were removed in this WTP to the extent of 79, 73, 85 and 67%, respectively.     

土地利用/覆盖变化对长江上游非点源污染影响研究

在国内外相关研究的基础上,利用输出系数模型,结合RS和GIS技术,对长江上游的非点源污染负荷进行了空间模拟和负荷估算.模拟结果表明,在不考虑流域损失的前提下,由于土地利用造成的非点源污染负荷TN总量从20世纪70年代的123万t下降至2000年的116万t,基本呈逐年减少的趋势,由土地利用造成的TP的变化趋势与TN基本相同,从70年代的3.7万t下降到2000年的3.5万t左右.就省份、土地利用类型和水系而言,四川省、种植用地和草地以及金沙江水系和嘉陵江水系对长江上游的非点源污染贡献较大.在非点源污染负荷强度上,重庆市和嘉陵江水系单位面积负荷最高,是今后应重点治理的地区.结果表明,该模型可以对长江上游这样的超大尺度空间的非点源污染进行较好的空间模拟.     

光电催化降解壬基酚影响因素研究

采用sol-gel法制备TiO2薄膜光电极,以该电极为工作电极,铂丝作对电极,饱和甘汞电极为参比电极,对壬基酚的光电催化降解进行了研究。结果表明:该电极具有n型半导体的特征行为。在外加偏压为+0.8V、pH=5、、30mg/L的H2O2中对初始浓度为20mg/L的壬基酚溶液光照180min降解率达62.22%。讨论了氧的存在、外加偏压、pH等因素对光电催化反应的影响。     

反渗透技术在小便池废水回用中的试验研究

首先将自配模拟尿液稀释不同的倍数后进行反渗透处理,确定了适宜的操作压力和合理的稀释倍数,然后用实际的人体尿液进行验证试验,经反渗透处理后,BOD5去除率达到98.3%、氨氮去除率达到97.7%、电导率降低了96.1%,产水投碱和二氧化氯后可达到城市杂用水水质标准(GB/T18920-2002)的要求,回用作冲厕用水。最后指出了值得关注的研究方向,以期能为小便池废水的循环利用提供一定的参考。     

层状氢氧化镁铝对偶氮染料酸性黑10B的脱色性能研究

分别用层状氢氧化镁铝(LDH)和焙烧层状氢氧化镁铝(CLDH)作为吸附剂吸附脱除水溶液中偶氮染料酸性黑10B.考察了脱色时间、pH值、吸附剂的投加量、温度、染料初始浓度和焙烧温度等因素对脱色率的影响.结果表明,LDH及CLDH对酸性黑10B染料具有良好的脱除效果,室温下,10g/L LDH和1g/L的CLDH对浓度为100mg/L的染料的脱色率分别达95.93%和99.97%.pH值是影响吸附能力的关键因素,吸附剂对溶液pH值有一定缓冲作用.LDH及CLDH对酸性黑10B吸附结果符合Langmuir吸附等温式.饱和吸附后的LDH及CLDH用高温热解法再生,吸附性能良好,随再生次数增多,脱色率下降.     

改良倒置A2/O工艺设计

在目前广泛采用的AO、A2O、倒置A2O等工艺的基础上,为提高脱氮除磷效率,提出改良倒置A2O工艺。并对其工艺的特点、设计和脱氮除磷效率进行了详细的研究和分析。     

偏电压对Ti/TiO2光电催化氧化富里酸的影响

采用光电催化反应器对水中天然有机物富里酸(FA)进行降解试验,考察了外加阳极偏电压对光电催化反应器降解富里酸的影响.结果表明,当外加电压为1.2V时,具有最佳的UV254和有机碳TOC去除率,当反应时间为2h时,富里酸的UV254和总有机碳TOC的去除率分别为77.4%和45.4%.另外,在反应初期(前1h内)富里酸光电催化反应动力学常数主要受外加偏电压的影响.