Evaluation of the Temporal Transferability of a Model Describing Dissolved Solids in Streams of the Upper Colorado River Basin1

Kenney, Terry A. and Susan G. Buto, 2012. Evaluation of the Temporal Transferability of a Model Describing Dissolved Solids in Streams of the Upper Colorado River Basin. Journal of the American Water Resources Association (JAWRA) 48(5): 1041‐1053. DOI: 10.1111/j.1752‐1688.2012.00667.x Abstract: The application of a nonlinear least‐squares regression model describing the sources and transport of dissolved solids in streams of the Upper Colorado River Basin, and that was calibrated using data from water year 1991, was evaluated for use in predicting annual dissolved‐solids loads for the years 1974 through 1998. Simulations for each water year were run using annual climate data. To evaluate how well the model captures the observed annual variability across the basin, differences in predicted annual dissolved‐solids loads for each simulated year and 1991 were compared with differences in monitored annual loads. The temporal trend of the differences between predicted annual loads for the simulated years and the load for 1991 generally followed the trend of the monitored loads. The model appears to underpredict the largest annual loads and overpredict some of the smaller annual loads. An underprediction bias for wetter years was evident in the residuals as was an overprediction bias, to a lesser degree, for drier years. A regression analysis on the residuals suggests that the underprediction bias is associated with precipitation differences from 1991 and with previously defined downward trends in dissolved‐solids concentrations in the basin. In general, given the representative climatic conditions, the model adequately performs throughout the period examined. However, the model is most transferable to years with climatic conditions similar to 1991.     

Identifying different types of bulking in an activated sludge system through quantitative image analysis

The present study proposes an image analysis methodology for the identification of different types of disturbances in wastewater treatment activated sludge systems. Up to date, most reported image analysis methodologies have been used in activated sludge processes with the aim of filamentous bulking detection, however, other disturbances could be foreseen in wastewater treatment plants. Such disturbances can lead to fluctuations in the biomass contents, affecting the mixed liquor suspended solids (MLSS), and in the sludge settling ability, affecting the sludge volume index (SVI). Therefore, this work focuses on predicting the MLSS and SVI parameters for different types of disturbances affecting an activated sludge system. Four experiments were conducted simulating filamentous bulking, zoogleal or viscous bulking, pinpoint floc formation, and normal operating conditions. Alongside the MLSS and SVI determination, the aggregated and filamentous biomass contents and morphology were studied as well as the biomass Gram and viability status, by means of image analysis.     

Determination of phenolic and steroid endocrine disrupting compounds in environmental matrices

BACKGROUND, AIM AND SCOPE: Many pollutants have received significant attention due to their potential estrogenic effect and are classified as endocrine disrupting compounds (EDCs). EDCs comprise many classes of organic compounds. The development or optimization of analytical protocols for the simultaneous determination of EDCs in environmental samples is an analytical challenge because these compounds exhibit different physicochemical characteristics, they occur in the aquatic environment in relatively low concentrations and, furthermore, environmental samples are considered as complex matrices. The aim of this study is the development of analytical methods for the simultaneous determination of phenolic and steroid EDCs in aqueous and solid samples. The target compounds are 4-nonylphenol, 4-octylphenol, their ethoxylate oligomers (mono- and di-ethoxylates of nonylphenol and octylphenol), bisphenol A, the estrogens (estriol, estrone, 17beta-estradiol, 17alpha-estradiol) and the synthetic steroids (mestranol and 17alpha-ethynylestradiol). MATERIALS AND METHODS: Solid phase extraction employing Oasis HLB cartridges and different elution solvents was used for the recovery studies of the target compounds from various types of water samples (ultrapure water, artificial seawater, river water and seawater). Ultrasonic assisted extraction was applied for the recovery of the target EDCs from the solid samples. The recoveries were assessed using various solvents for the extraction and the elution of EDCs from different SPE cartridges used for clean up. Gas chromatography-mass spectrometry after derivatization with N,O-bis(trimethylsilyl)-trifluoroacetamide was employed for the determination of these compounds. RESULTS AND DISCUSSION: The recovery rates of three elution solvents (methanol, acetone and ethylacetate) for the extraction of target EDCs from artificial seawater were assessed after preconcentration on SPE cartridges. Acetone showed better recoveries and was further tested for its extraction efficiency in different water types (river water, seawater). Ultrasonic assisted extraction was used for the recovery of target EDCs from solid matrices. Acetone, methanol, mixture of acetone-methanol (1:1) and ethylacetate were used as extraction solvents. Ethylacetate and the mixture of acetone-methanol (1:1) exhibited better extraction efficiencies. An additional clean up step was necessary for sediment samples. Different SPE cartridges were employed for clean up of the extracts (Oasis HLB, C18, Florisil, silica, combination of silica and alumina). Florisil cartridges were finally used. The proposed methods were further validated on the determination of target EDCs in field collected samples (river water, seawater, wastewater, total suspended solids and sediments) from the major area of Thessaloniki, Greece. CONCLUSIONS: Efficient and accurate integrated methods for the simultaneous determination of alkylphenols (nonylphenol, octylphenol), their ethoxylate oligomers (mono- and di-ethoxylate of nonylphenol and octylphenol), bisphenol A and steroids (estriol, estrone, 17beta-estradiol, 17alpha-estradiol, mestranol and 17alpha-ethynylestradiol) in aqueous and solid samples were developed. The proposed methods were applied for the determination of the target compounds in representative environmental samples in the area of Thessaloniki, Northern Greece. RECOMMENDATIONS AND PERSPECTIVES: This study confirms the occurrence of selected EDCs in inland and marine waters in the area of Thessaloniki, Northern Greece. Since there is no previous data on the occurrence of the target EDCs in the major area, an extended survey is in progress to evaluate the occurrence and fate of these compounds.     

RUNOFF EVENT IMPACTS ON A WATER SUPPLY RESERVOIR: SUSPENDED SEDIMENT LOADING, TURBID PLUME BEHAVIOR, AND SEDIMENT DEPOSITION1

Abstract: The impacts of runoff events on external suspended solids loading to Schoharie Reservoir, New York, and patterns of light scattering and sediment deposition in this reservoir are assessed. The assessment is based on monitoring of suspended solids concentrations in the reservoir's primary tributary, detailed vertical profiles of optical backscattering (a surrogate measure of light scattering) in the reservoir water column, and analysis of sediment trap collections, over a seven-month interval of high runoff. These impacts are reported to be tightly temporally coupled and strongly positively related to the magnitude of runoff events. The primary tributary entered the reservoir as a plunging inflow during runoff events, causing conspicuous subsurface peaks in light scattering, with vertical patterns that varied strongly for different events. Deposition quantified by near-bottom trap deployments is reported to be more representative than results from metalimnetic deployments that were generally within, rather than below, the turbid layers. Direct inputs of sediment, transported by density currents, are found to drive deposition, rather than resuspension/redeposition. More than 50 percent of the reported deposition occurred in less than 15 percent of the study period, associated with the four largest runoff events.     

Aeration optimization through operation at low dissolved oxygen concentrations: Evaluation of oxygen mass transfer dynamics in different activated sludge systems

In wastewater treatment plants(WWTPs)using the activated sludge process,two methods are widely used to improve aeration efficiency — use of high-efficiency aeration devices and optimizing the aeration control strategy. Aeration efficiency is closely linked to sludge characteristics(such as concentrations of mixed liquor suspended solids(MLSS)and microbial communities)and operating conditions(such as air flow rate and operational dissolved oxygen(DO)concentrations). Moreover,operational DO is closely linked to effluent quality. This study,which is in reference to WWTP discharge class A Chinese standard effluent criteria,determined the growth kinetics parameters of nitrifiers at different DO levels in small-scale tests. Results showed that the activated sludge system could meet effluent criteria when DO was as low as 0.3 mg/L,and that nitrifier communities cultivated under low DO conditions had higher oxygen affinity than those cultivated under high DO conditions,as indicated by the oxygen half-saturation constant and nitrification ability. Based on nitrifier growth kinetics and on the oxygen mass transfer dynamic model(determined using different air flow rate(Q′_(air))and mixed liquor volatile suspended solids(MLVSS)values),theoretical analysis indicated limited potential for energy saving by improving aeration diffuser performance when the activated sludge system had low oxygen consumption; however,operating at low DO and low MLVSS could significantly reduce energy consumption. Finally,a control strategy coupling sludge retention time and MLVSS to minimize the DO level was discussed,which is critical to appropriate setting of the oxygen point and to the operation of low DO treatment technology.     

Monitoring total suspended solids by using nephelometry

Correlation curves were developed relating nephelometric turbidity units (NTU) with total suspended solids (TSS) for diked upland dredged material placement site effluents of three US Army Corps of Engineers (COE) maintenance dredging projects in the Chesapeake Bay, Maryland. The procedure was developed in an effort to ensure compliance with Maryland's 400 milligrams per liter (mg/l) TSS standard for COE dredging projects. Samples of the sediments to be dredged were collected and analyzed, correlating turbidity readings with TSS determined by standard gravimetric techniques. The correlation curves were provided to the COE inspectors to measure the effluent with a turbidity meter and to extract a TSS concentration from the correlation curve. Samples collected and analyzed after initiation of the dredging indicated that the correlation curves were an overestimate of the actual TSS concentrations of the effluent discharges. The procedure, endorsed by the State of Maryland, provided immediate on-site TSS analysis eliminating the previously encountered delays in obtaining gravimetric analysis of effluent discharges and potential contract management problems.     

Modeling of secondary treated wastewater disinfection by UV irradiation: Effects of suspended solids content

This work aimed to study UV-resistant strains of Pseudomonas aeruginosa, to propose a formulation of the kinetics of secondary treated wastewater disinfection and to underline the influence of suspended solids on the inactivation kinetics of these strains. Some investigations were carried out for the validation of some simulation models, from the simplest, the kinetics model of Chick-Watson reduced to first order, to rather complex models such as multi-kinetic and Collins-Selleck models. Results revealed that the involved processes of UV irradiation were too complex to be approached by a simplified formulation, even in the case of specific strains of microorganisms and the use of nearly constant UV radiation intensity. In fact, the application of Chick-Watson model in its original form is not representative of the kinetics of UV disinfection. Modification, taking into account the speed change during the disinfection process, has not significantly improved results. On the other hand, the application of Collins-Selleck model demonstrates that it was necessary to exceed a least dose of critical radiation to start the process of inactivation. To better explain the process of inactivation, we have assumed that the action of disinfectant on the survival of lonely microorganisms is faster than its action on suspended solids protected or agglomerated to each others. We can assume in this case the existence of two inactivation kinetics during the processes (parallel and independent) of the first-order. For this reason, the application of a new kinetic model by introducing a third factor reflecting the influence of suspended solids in water on disinfection kinetics appeared to be determinant for modeling UV inactivation of P. aeruginosa in secondary treated wastewater.     

水中悬浮物测定方法探讨

根据国家测试废水中悬浮物浓度的分析标准,在采用不同生产厂家生产的微孔滤膜（孔径0.45？m,直径50mm）测试煤矿矿井水时,常碰到比较清洁的水样容易出现负值的现象。通过对微孔滤膜的反复实验并深入分析,提出了如何改进＂滤膜准备＂的操作步骤建议,对更加真实反映水体中悬浮物浓度具有一定意义。     

淮南矿区矿井水净化处理中试研究

根据淮南矿区矿井水以含悬浮物为主要污染物的水质特点,设计了一套矿井水悬浮物去除装置及配套加药系统,并在淮南矿区某煤矿进行了中试研究。结果表明：中试装置采用高效接触絮凝反应、斜板沉淀集成工艺技术,压力式进水和出水,依靠水力作用完成絮凝反应和沉淀过程。装置净化处理后水质能够满足煤矿井下消防、洒水对水质的要求,且运行稳定、效率高、空间体积小、能耗低。     

Load Estimation Method Using Distributions with Covariates: A Comparison with Commonly Used Estimation Methods

Load estimates obtained using an approach based on statistical distributions with parameters expressed as a function of covariates (e.g., streamflow) (distribution with covariates hereafter called DC method) were compared to four load estimation methods: (1) flow‐weighted mean concentration; (2) integral regression; (3) segmented regression (the last two with Ferguson's correction factor); and (4) hydrograph separation methods. A total of 25 datasets (from 19 stations) of daily concentrations of total dissolved solids, nutrients, or suspended particulate matter were used. The selected stations represented a wide range of hydrological conditions. Annual flux errors were determined by randomly generating 50 monthly sample series from daily series. Annual and interannual biases and dispersions were evaluated and compared. The impact of sampling frequency was investigated through the generation of bimonthly and weekly surveys. Interannual uncertainty analysis showed that the performance of the DC method was comparable with those of the other methods, except for stations showing high hydrological variability. In this case, the DC method performed better, with annual biases lower than those characterizing the other methods. Results show that the DC method generated the smallest pollutant load errors when considering a monthly sampling frequency for rivers showing high variability in hydrological conditions and contaminant concentrations.