人工神经网络和遗传算法在生物载体填料生产工艺中的应用

本文应用BP人工神经网络建立了生物流化床污水处理工艺中新型生物载体填料的生产工艺参数与填料磨损破碎率和松散容重之间的关系，并运用遗传算法对填料的生产工艺进行了优化。结果表明：填料的最佳生产工艺参数为：EVA含量14％；活性炭含量3．6％；胶粉粒度18.97目。此时，填料的磨损破碎率和松散容量均达到最优值，分别为0．358％和0．226kg／L。这一优化结果对生物载体填料的实际生产加工具有指导意义。     

硫磺回收装置酸性气配风控制方案探讨

主要介绍采用克劳斯制硫工艺的硫磺回收装置制硫转化炉配风调节的几种控制方案以及气体分析仪对稳定操作。提高硫回收率所起的重要作用。     

Oxygen tolerance capacity of upflow anaerobic solid-state (UASS) with anaerobic filter (AF) system

In order to investigate the oxygen tolerance capacity of upflow anaerobic solid-state(UASS)with anaerobic filter(AF) system, the effect of microaeration on thermophilic anaerobic digestion of maize straw was investigated under batch conditions and in the UASS with AF system. Aeration intensities of 0–431 m L O2/gvswere conducted as pretreatment under batch conditions. Aeration pretreatment obviously enhanced anaerobic digestion and an aeration intensity of 431 m L O2/gvsincreased the methane yield by 82.2%. Aeration intensities of 0–355 m L O2/gvswere conducted in the process liquor circulation of the UASS with AF system. Dissolved oxygen(DO) of UASS and AF reactors kept around 1.39 ±0.27 and 0.99 ± 0.38 mg/L, respectively. p H was relatively stable around 7.11 ± 0.04. Volatile fatty acids and soluble chemical oxygen demand concentration in UASS reactor were higher than those in AF reactor. Methane yield of the whole system was almost stable at 85 ± 7 m L/gvs as aeration intensity increased step by step. The UASS with AF system showed good oxygen tolerance capacity.     

Experimental and life cycle assessment analysis of gas emission from mechanically–biologically pretreated waste in a landfill with energy recovery

The global gaseous emissions produced by landfilling the Mechanically Sorted Organic Fraction (MSOF) with different weeks of Mechanical Biological Treatment (MBT) was evaluated for an existing waste management system. One MBT facility and a landfill with internal combustion engines fuelled by the landfill gas for electrical energy production operate in the waste management system considered. An experimental apparatus was used to simulate 0, 4, 8 and 16 weeks of aerobic stabilization and the consequent biogas potential (Nl/kg) of a large sample of MSOF withdrawn from the full-scale MBT. Stabilization achieved by the waste was evaluated by dynamic oxygen uptake and fermentation tests. Good correlation coefficients (R²), ranging from 0.7668 to 0.9772, were found between oxygen uptake, fermentation and anaerobic test values. On the basis of the results of several anaerobic tests, the methane production rate k (year^?1) was evaluated. k ranged from 0.436 to 0.308 year^?1 and the bio-methane potential from 37 to 12 N m³/tonne, respectively, for the MSOF with 0 and 16 weeks of treatment. Energy recovery from landfill gas ranged from about 11 to 90 kW h per tonne of disposed MSOF depending on the different scenario investigated. Life cycle analysis showed that the scenario with 0 weeks of pre-treatment has the highest weighted global impact even if opposite results were obtained with respect to the single impact criteria. MSOF pre-treatment periods longer than 4 weeks showed rather negligible variation in the global impact of system emissions.     

固定化厌氧微生物多孔囊状聚酰胺载体的研制

采用界面聚合方法制备出固定化厌氧微生物多孔囊状聚酰胺载体。该载体壁薄,内外表面粗糙多孔,具有典型的囊状空间、较高的孔体积和比表面积。将该载体用于厌氧法处理人工合成废水,同一时间的沼气产量高于使用基体型多孔聚合物载体和未使用载体时的沼气产量,在3种情况下的36d累积沼气产量分别为1430,1210,875mL。使用电子扫描电镜观察固定化微生物载体,发现有大量的厌氧菌群生长在载体内外表面。实验结果表明,该载体固定厌氧微生物的性能良好。     

SBR工艺处理皂素废水的实验研究及对策分析

废水处理是皂素产业可持续发展的关键,为解决这一问题,我们综合考虑了皂紊废水处理的技术、经济和运行管理等方面,预选了SBR工艺,并以反应时间为中心,试验分析了基质浓度、污泥浓度、温度和曝气强度对反应时间的影响。试验结果表明,氧的传质是SBR工艺处理皂素废水的核心问题,并据此分析了提高经济性和运行管理可操作性的对策。     

测定废水BOD5时水样稀释倍数的确定

根据测定BOD5所须具备条件,经过理论推导,得出水样稀释倍数的大致范围,对多种工业废水测试证,表明方法简便易行。     

LNG船舶进出港航行移动安全区宽度定量计算分析

为保障液化天然气(LNG)船舶进出港通航安全,提出一种基于LNG船舶碰撞事故概率和风险的LNG船舶移动安全区宽度界定方法。该方法以船舶碰撞概率模型、船舶碰撞损害模型和LNG池火危害模型为基础,计算LNG船舶在航行过程中的事故概率和风险,并根据其分布特征,结合事故概率与风险可接受标准,定量界定LNG船舶移动安全区的宽度。研究表明,LNG船舶移动安全区宽度与通航水域交通流分布、事故船舶的排水量、航行速度等相关。在水上交通管理应用中,可根据LNG船舶及应用水域交通的实际情况确定LNG船舶进出港航行移动安全区的宽度。