Layered sphere-shaped TiO2 capped with gold nanoparticles on structural defects and their catalysis of formaldehyde oxidation

We describe here a one-step method for the synthesis of Au/TiO₂ nanosphere materials, which were formed by layered deposition of multiple anatase TiO₂ nanosheets. The Au nanoparticles were stabilized by structural defects in each TiO₂ nanosheet, including crystal steps and edges, thereby fixing the Au–TiO₂ perimeter interface. Reactant transfer occurred along the gaps between these TiO₂ nanosheet layers and in contact with catalytically active sites at the Au–TiO₂ interface. The doped Au induced the formation of oxygen vacancies in the Au–TiO₂ interface. Such vacancies are essential for generating active oxygen species (*O⁻) on the TiO₂ surface and Ti^3 + ions in bulk TiO₂. These ions can then form Ti^3 +–O⁻–Ti^4 + species, which are known to enhance the catalytic activity of formaldehyde (HCHO) oxidation. These studies on structural and oxygen vacancy defects in Au/TiO₂ samples provide a theoretical foundation for the catalytic mechanism of HCHO oxidation on oxide-supported Au materials.     

浅谈水库风景区建设在生态保护与修复中的利用——以孝感市为例

在市场经济的条件下,开展水库生态风景区建设,要充分利用库区旅游资源开发带来的经济效益,结合水库风景的特点,按供需平衡关系,改变资源利用形式,按边沿景现再造模式,多层次、可持续地开发与保护水库资源,促进水利风景区的健康发展.     

九龙江流域生态环境需水量计算

九龙江流域降雨量和径流量在流域空间和年内分配上明显不均,使枯水季节生态环境用水量在局部河段无法得到满足,导致局部河段水体出现富营养化。根据研究需要,将流域分为12个计算区域。将生态环境需水量分为湿地生态环境需水量和旱地环境生态需水量进行计算,分别为60.431×108m3和84.622×108m3,流域生态环境需水总量合计145.053×108m3。流域多年平均降水量为235.856×108m3,盈余量为90.803×108m3,总体可以满足流域经济社会发展和维护生态系统平衡的需要。但是,生态环境用水量保证程度不但与天然径流量有直接关系,也在很大程度上受人为因素的影响。     

生化需氧量(BOD5)测定方法的改进和数据的图解法处理

介绍了图解法的原理,实验条件,实验方法,并采用图解法和标准法,通过对国家标准样品和有代表性的实际水样进行ＢＯＤ５测定和比较,所有试验样品的测定值均在标准样品的已知值范围内。图解法与标准法相比,两者误差不超过±５％,证明了图解法的准确性,合理性和实用性。图解法是标准法的改进,它简化了实验操作,减少了误差,使测定计算更准确。     

水温对氧转移速率的影响研究

通过对上澳塘水体的曝气充氧实验,研究了温度对氧转移速率的影响,测定了温度系数,为上澳塘水体曝气净化的工程实践提供了可靠的技术参数。      

白洋淀沉积物耗氧速率及氧亏效应研究

沉积物耗氧是影响水体溶解氧平衡的重要因素,受到沉积物有机质矿化的影响.本文采用柱培养法测定了白洋淀不同水文地貌分区和生境类型的表层沉积物耗氧速率(sediment oxygen demand,SOD),并基于地表水质量标准评估了白洋淀沉积物耗氧对水体产生的氧亏效应,探讨了白洋淀SOD与有机质(OM)的关系.结果表明,白...     

爆炸焊接的安全评估和安全防护措施

根据爆炸焊接的装药特点,对爆炸焊接炸药的使用、爆炸产生的地震波、毒气、噪音等的安全性进行了分析,给出了定量的计算公式,同时还针对不同的爆破危害,提出了相应的安全防护措施     

活性污泥数学模型中异养菌产率系数的测定

活性污泥数学模型常被用于预测污水处理厂中的生物过程。模型中异养菌产率系数YH对其他组分的测定值有显著的影响。目前．测定YH的主要方法有序批式活性污泥法和序批式呼吸计量法。在序批式呼吸计量法中．起始F／M值的选择十分关键。以醋酸钠为底物．对这两种方法进行了分析比较,序批式呼吸计量法为文章的推荐方法。     

非线性回归法计算曝气设备清水氧传递系数

分析对比作图法、线性回归法和非线性回归法计算曝气设备清水氧传递系数(KLa)各自的优缺点。指出在实际测定曝气设备性能中,使用非线性回归法计算KLa更加可靠．而且可以使测试过程更加容易控制。所以在实际测试过程中,推荐使用非线性回归法计算KLa。     

Effects of Zr substitution on soot combustion over cubic fluorite-structured nanoceria: Soot-ceria contact and interfacial oxygen evolution

Ceria is widely used as a catalyst for soot combustion, but effects of Zr substitution on the reaction mechanism is ambiguous. The present work elucidates effects of Zr substitution on soot combustion over cubic fluorite-structured nanoceria. The nanostructured CeO₂, Ce_0.92Zr_0.08O₂, and Ce_0.84Zr_0.16O₂ composed of 5–6 nm crystallites display T_m-CO2 (the temperature at maximum CO₂ yield) at 383, 355, and 375°C under 10 vol.% O₂/N₂, respectively. The size of agglomerate decreases from 165.5 to 51.9–57.3 nm, which is beneficial for the soot-ceria contact. Moreover, Zr increases the amount of surface oxygen vacancies, generating more active oxygen (O₂^? and O^?) for soot oxidation. Thus, the activities of Ce_0.92Zr_0.08O₂ and Ce_0.84Zr_0.16O₂ in soot combustion are better than that of CeO₂. Although oxygen vacancies promote the migration of lattice O^2?, the enriched surface Zr also inhibits the mobility of lattice O^2?. Therefore, the T_m-CO2 of Ce_0.84Zr_0.16O₂ is higher than that of Ce_0.92Zr_0.08O₂. Based on reaction kinetic study, soot in direct contact with ceria preferentially decomposes with low activation energy, while the oxidation of isolated soot occurs through diffusion with high activation energy. The obtained findings provide new understanding on the soot combustion over nanoceria.