Adsorption of 2-mercaptobenzothiazole from aqueous solution by organo-bentonite

The adsorption behavior of 2-mercaptobenzothiazole onto organo-bentonite was investigated.Natural bentonite from Gaozhou in Guangdong Province,China was collected.Organo-bentonite was prepared by intercalation of cetyltrimethyl ammonium bromide into the natural bentonite.The physicochemical properties of the prepared organo-bentonite were characterized by X-ray diffraction,N2 adsorption-desorption isotherm and Fourier transform infrared spectroscopy.The results showed that montmorillonite is the main component of the natural bentonite.The basal spacing of the natural bentonite is 1.47 nm,which increased to 1.98 nm on intercalation with cetyltrimethyl ammonium bromide.Moreover,both the surface area and pore volume increased with intercalation.Clear CH2 stretching(3000-2800 cm-1) and scissoring(1480-1450 cm-1) modes of the intercalated surfactants were observed for organobentonite.Compared with the pseudo first-order kinetic model,the pseudo second-order kinetic model is more suitable to describe the adsorption kinetics of 2-mercaptobenzothiazole onto organo-bentonite.The adsorption capacity of 2-mercaptobenzothiazole onto organo-bentonite increased with increasing initial concentration of 2-mercaptobenzothiazole,but decreased with increasing adsorbent dosage.The adsorption isotherm of 2-mercaptobenzothiazole onto organo-bentonite fits well with the Langmuir model.The maximum adsorption capacity of organo-bentonite for 2-mercaptobenzothiazole was 33.61 mg/g,indicating that organo-bentonite is a promising adsorbent for 2-mercaptobenzothiazole.     

Formic acid as an alternative reducing agent for the catalytic nitrate reduction in aqueous media

Formic acid was used for the nitrate reduction as a reductant in the presence of Pd:Cu/γ-alumina catalysts. The surface characteristics of the bimetallic catalyst synthesized by wet impregnation were investigated by SEM, TEM-EDS. The metals were not distributed homogeneously on the surface of catalyst, although the total contents of both metals in particles agreed well with the theoretical values. Formic acid decomposition on the catalyst surface, its influence on solution pH and nitrate removal efficacy was investigated. The best removal of nitrate (50 ppm) was obtained under the condition of 0.75 g/L catalyst with Pd:Cu ratio (4:1) and two fold excess of formic acid. Formic acid decay patterns resembled those of nitrate removal, showing a linear relationship between kf (formic acid decay) and k (nitrate removal). Negligible amount of ammonia was detected, and no nitrite was detected, possibly due to buffering effect of bicarbonate that is in situ produced by the decomposition of formic acid, and due to the sustained release of H2 gas.     

Speciation of organic phosphorus in a sediment profile of Lake Taihu II. Molecular species and their depth attenuation

The understanding of organic phosphorus(P) dynamics in sediments requires information on their species at the molecular level,but such information in sediment profiles is scarce.A sediment profile was selected from a large eutrophic lake,Lake Taihu(China),and organic P species in the sediments were detected using solution phosphorus-31 nuclear magnetic resonance spectroscopy(31 P NMR) following extraction of the sediments with a mixture of 0.25 mol/L NaOH and 50 mmol/L EDTA(NaOH-EDTA) solution.The results showed that P in the NaOH-EDTA extracts was mainly composed of orthophosphate,orthophosphate monoesters,phospholipids,DNA,and pyrophosphate.Concentrations of the major organic P compound groups and pyrophosphate showed a decreasing trend with the increase of depth.Their half-life times varied from 3 to 27 years,following the order of orthophosphate monoesters > phospholipids DNA > pyrophosphate.Principal component analysis revealed that the detected organic P species had binding phases similar to those of humic acid-associated organic P(NaOH-NRP HA),a labile organic P pool that tends to transform to recalcitrant organic P pools as the early diagenetic processes proceed.This demonstrated that the depth attenuation of the organic P species could be partly attributed to their increasing immobilization by the sediment solids,while their degradation rates should be significantly lower than what were suggested in previous studies.     

我国水泥工业碳排放特征及动态变化分析

水泥工业是温室气体二氧化碳(CO2)的主要排放源,利用碳排放数学模型计算2001-2010年我国水泥工业碳的排放量,分析碳排放量的变化特点和发展趋势。结果表明:水泥工业碳排放总量逐年增长,与水泥产量和排放强度呈线性关系。"十一五"期间单位产品碳排放强度由0.69 t/t下降到0.65 t/t。万元GDP碳排放量2008年达到最低值为0.295 1 t,平均每年万元GDP碳排放量下降2.85%。水泥工业十年间实施节能降耗、资源循环利用、提高经济效益等措施,对于减少碳排放具有明显效果。     

新颖性染料脱色菌株的筛选及脱色效果研究

文章首次尝试以新颖筛选方法对台湾及大陆两岸当地微生物自然生态中,以非偶氮染料脱色作为优势筛选条件,以筛选出可有效电子传递于非偶氮染料RB198脱色的混菌,再进行优势纯化分离,以得到可对非偶氮染料具有强电子传递脱色能力的菌株。再藉此特性来研究其对偶氮染料电子传递生物脱色的特性。结果表明,通过脱色测试及蛋白质电泳初步筛选出4种对非偶氮染料RB198具有较优异脱色能力的菌株,并进行16S rRNA分析,此4株纯菌分别为Microvirgula aerodenitrificans,Acinetobacter guillouiae,Pseudomonas sp.,Rahnella aquatilis。其中Rahnella aquatilis DX2b,Microvirgula aerodenitrificans SH7b为脱色新菌株,文章首度发表其具有脱色性能,对非偶氮染料RB198及偶氮染料RB160,OrangeⅠ有优异脱色能力。     

化学铁盐辅助除磷对生物除磷的影响研究

化学辅助除磷有助于污水厂实现磷达标,但其对生物系统存在潜在的影响。针对除磷药剂对生物除磷过程的影响展开研究,选用硫酸亚铁进行化学辅助除磷。药剂形成的化学污泥干扰生物除磷过程且成分复杂,故以磷酸铁、氢氧化铁模拟化学污泥,由钾离子、K/P摩尔比计算出同步除磷中的生物除磷,来探讨化学污泥对聚磷菌释磷/吸磷过程的影响。结果表明,连续投加硫酸亚铁使聚磷菌的释磷量、吸磷量降低;系统中磷酸铁含量0.075 mmol/L时聚磷菌的释磷和吸磷能力提高了约25%,磷酸铁含量0.15 mmol/L时对聚磷菌吸磷有抑制作用;氢氧化铁对聚磷菌释磷、好氧初期吸磷均有抑制作用。生物污泥与化学污泥存在交互作用。     

OMS-2负载Pt催化剂的制备及其催化氧化性能研究

采用前掺杂法、沉积-沉淀法和浸渍法制备了氧化锰八面体分子筛(OMS-2)负载Pt催化剂(Pt/OMS-2),对所制催化剂进行了结构和织构表征。并研究了不同制备方法和沉积-沉淀法中不同制备(Pt负载量和溶液的pH值)对Pt/OMS-2催化氧化CO性能的影响。结果表明,沉积-沉淀法制备的Pt/OMS-2-DP催化剂活性最好(T100=100℃)。这与Pt/OMS-2-DP催化剂中Pt颗粒大小及OMS-2载体与Pt之间存在强相互作用有关。Pt负载量明显影响Pt/OMS-2-DP催化剂的催化活性,3Pt/OMS-2-DP催化剂(Pt=3.0 wt%)催化活性最高,这是由于适当Pt负载量,Pt颗粒较小,并与载体OMS-2的相互作用较强,能较好地活化OMS-2晶格氧。pH值对Pt/OMS-2-DP催化剂催化性能影响较大,这与OMS-2的等电点和Pt在不同溶液中存在不同Pt配位体形式有关。     

2,2′-二硝基联苄生产废水的处理研究

对十六烷基三甲基溴化铵改性凹凸棒土、凹凸棒土负载TiO2采用XRD、FTIR以及TG等手段进行了分析和表征,对比了改性凹凸棒土、活性炭、大孔树脂等不同吸附剂和凹凸棒土负载TiO2对二硝基联苄生产废水的处理效果。结果表明:十六烷基三甲基溴化铵改性凹凸棒土的废水中污染物的去除率比凹凸棒土提高了2.5倍;凹凸棒土负载TiO2在波长λ=254 nm下光照0.5 h,对废水中污染物的去除率是凹凸棒土的2.0倍;投加量为3%活性炭在pH为2.0⁵.0时,对该类废水中污染物的去除率可达80%以上。     

基于单片机的低成本硫化氢监测系统设计

设计了一款基于单片机AT89S52的低成本硫化氢监测报警系统,介绍了该系统的工作原理和设计方法。硫化氢气体浓度由电化学气体传感器ME4-H2S采集,电流信号经I/V转换后送单片机处理并通过LCD显示当前浓度,通过与设定标准浓度进行比较,继而判断是否发出报警。仿真测试表明,该系统结构简单,工作可靠,指示灯颜色显示三级不同警报,可以应用于高温沙漠、下水道、石油天然气钻井作业等恶劣气候、恶劣环境场合。     

水中脲类除草剂Chlortoluron氯化产物鉴定、降解途径探究

对不同pH下Chlortoluron氯化后生成的非挥发性中间产物和挥发性产物进行了研究。对Chlortoluron氯化后的非挥发性中间产物的UPLC-ESI-MS鉴定发现了m/z为213、229、263、281、和247的离子,分析表明它们分别是Chlortoluron及其一羟基、一氯羟基、二氯和一氯衍生物。对Chlortoluron氯化后的挥发性产物采用吹扫补集-GC-MS进行分析鉴定发现了三氯甲烷(CF)、二氯硝基甲烷(DCNM)、二氯乙腈(DCAN)、1,1-2-二氯丙酮(1,1-DCP)、三氯硝基甲烷(TCNM)和1,1,1-2-三氯丙酮(1,1,1-TCP)六种消毒副产物。根据本研究中的实验结果分析和推测,在Chlortoluron的氯化过程中,苯环上和脲基链上都经历了羟基化、氧化和取代反应,接着苯环被打破,随后生成了更为有害的副产物,基于此,本文推断了Chlortoluron的氯化降解途径。