试点城市O3浓度特征分析

利用2009年O3试点城市的03监测数据,分析了北京、天津、上海、青岛、沈阳和广东的03浓度变化特征,统计了年超标情况,并结合气象要素数据分析了其对03浓度的影响.结果表明,不同城市各点位间03浓度变化趋势基本一致,但因点位类型不同,浓度存在差异;O3浓度呈单峰型日变化,在13:00-15:00出现最大值,6:00-7:00出现最小值;O3超标主要集中在4-8月份,广州和北京超标现象较多;O3浓度受温度、降水、风速和风向等气象要素影响较大.     

Catalytic destruction of pentachlorobenzene in simulated flue gas by a V2O5-WO3/TiO2 catalyst

Pentachlorobenzene (PeCB) in simulated flue gas was destructed by a commercial V₂O₅-WO₃/TiO₂ catalyst in this study. The effects of reaction temperature, oxygen concentration, space velocity and some co-existing pollutants on PeCB conversion were investigated. Furthermore, a possible mechanism for the oxidation of PeCB over the vanadium oxide on the catalysts was proposed. Results show that the increase of gas hourly space velocity (GHSV) and the decrease of operating temperature both resulted in the decrease of PeCB removal over the catalyst, while the effect of the oxygen content in the range of 5-20% (v/v) on PeCB conversion was negligible. PeCB decomposition could be obviously affected by the denitration reactions under the conditions because of the positive effect of NO but negative effect of NH₃. The introduction of SO₂ caused the catalyst poisoning, probably due to the sulfur-containing species formed and deposited on the catalyst surface. The PeCB molecules were first adsorbed on the catalyst surface, and then oxidized into the non-aromatic acyclic intermediates, low chlorinated aromatics and maleic anhydride.     

面向突发性水污染事件的三维可视化系统

针对突发性水污染事件的突发性、复杂性与潜在的次生衍生危害等特点,设计并开发了面向突发性水污染事件的三维可视化系统。对建设三维可视化系统的需求进行了分析,提出了系统的四层体系结构,基于三维地理信息系统World Wind组件,采用三维可视化环境建模、海量数据缓存机制以及基础地理信息集成等信息技术,开发了系统的基本应用与高级应用,将系统应用到2005年发生在松花江流域的突发性水污染事件中。实例表明:所设计的三维可视化系统具有集成性、可扩展性和较好三维表现力等特点,支持海量数据与复杂应用的集成与三维展示,为突发性水污染事件的空间模拟和决策支持提供支撑。     

半导体生产排放的废气和废水中砷、磷、硫的分析方法研究

研究了一种快速、灵敏、可靠的高温氢还原-气相色谱分析方法[1-2]，并自行设计了高温还原系统(还原炉、六通阀等)，测定半导体生产排放废气和废水中的砷、磷、硫及其化合物，样品不需预处理，使气相色谱仪能直接测定固、液、气相样品中砷、磷、硫及其化合物的含量。砷、磷、硫的检测限分别为0．01mg／L、0．003mg／L、0．02mg／L；相对标准偏差分别为6．2％、8．6％和0．3％，与经典方法进行对比，结果基本一致。从分析方法的误差统计角度，也说明该方法准确、可靠。     

基于贝叶斯的苯并(α)芘PBPK模型优化与健康风险评估应用

应用基于生理的药代动力学(PBPK)模型预测苯并(α)芘(BaP)暴露的人体内部剂量,基于贝叶斯的马尔科夫链蒙特卡洛模拟(MCMC)方法对模型参数进行校准和优化,最后运用已优化的模型对BaP内暴露基准值进行推导.研究发现,基于贝叶斯的MCMC方法对模型后验参数校准后,模型精度明显提高,两个数据集验证结果显示残差平方和分别降低了72%和94%.PBPK模型以BaP和子代谢物3-羟基苯并(α)芘(3-OHBaP)的体内动力学过程为结构基础,模拟BaP体内浓度分布大小为脂肪>肾脏>皮肤>缓慢灌注组织>快速灌注组织>静脉血>肝脏;3-OHBaP体内浓度分布大小为肾脏>快速灌注组织>脂肪>肺>静脉血>缓慢灌注组织>肝脏>皮肤.敏感性分析显示,快速灌注组织-血分配系数对模型输出影响最大,灵敏度系数超过了200%;排泄系数影响最小,只有肾小球过滤率K_BR的灵敏度系数超过了1%.以美国国家环境保护局推荐的参考浓度2.0×10^-6mg/m³为外暴露安全基准值,基于PBPK模型推导了职业暴露的BaP生物监测当量(BE),结果显示BE值为0.405pmol/mol肌酐(尿液3-OHBaP平均浓度),为基于人体内暴露剂量水平进行定量健康风险评估奠定了基础.     

碳化泡沫负载Co3O4活化过硫酸盐降解罗丹明B

Co₃O₄具有优良的活化过硫酸盐的性能而受到人们的重视,但Co₃O₄粉体易团聚、使用过程中难以分离、易流失和重复利用率差等问题严重制约了其实际应用．通过水热法制备碳化三聚氰胺泡沫负载Co₃O₄非均相催化剂．采用X-射线衍射仪（XRD）和扫描电子显微镜（SEM）对催化剂的结构和表面形貌进行分析．研究不同因素对催化剂活化过硫酸氢钾（PMS）降解罗丹明B（RhB）的性能．其最优催化工艺参数：催化剂投加量为35 mg·L^-1、PMS质量浓度为50 mg·L^-1和pH为7、RhB初始质量浓度为10 mg·L^-1,30 min反应后对RhB降解率为98%．结果表明,增大碳化泡沫负载Co₃O₄非均相催化剂投加量和PMS质量浓度能明显提高对RhB的降解率;而增加RhB初始质量浓度和提高pH值会明显抑制RhB的降解率．催化反应过程符合准一级动力学方程．温度对RhB降...     

高能重离子辐照下国产RPV钢A508-3的硬化行为

目的 研究在563 K的温度条件下,高能重离子辐照导致国产RPV钢A508-3的硬化行为。方法 使用回旋加速器提供的352.8 MeV Fe²¹⁺对A508-3钢试样进行辐照,使其依次达到0.15、0.30、1.50 dpa的损伤水平。借助辐照终端的梯度减能装置,在样品表面至25 μm的深度范围内产生一个准均匀分布的原子离位损伤坪区,并使用纳米压痕仪和维氏显微硬度计测量了试样的硬度。结果 考虑到压痕尺寸效应的影响,采用Nix-Gao模型对硬度数据进行拟合,由于高能Fe离子产生了较厚的损伤区,辐照试样中的软基效应明显减弱。辐照后的试样出现明显的硬化现象,且随着辐照剂量的增大,硬化增量有饱和趋势。通过辐照前和辐照至0.15 dpa试样的微硬度数据,得出其与纳米硬度之间的线性关系(Hv0=0.85 H0)。结论 借助A508-3辐照前后的硬度数据,计算发现试样的屈服强度增量与辐照剂量之间存在一种幂函数关系,这为A508-3钢中子-离子辐照硬化的映射关系研究提供了基础数据。     

苏州河市郊段底泥中COD_(Cr)和NH_3-N的空间分布特征

对苏州河截流区外河段(城郊段)东大盈河口—北新泾,按河道形态,支流与城镇分布等因素,沿程采集24个底泥柱样,测定其不同部位不同深度底泥中COD_(Cr)和NH_3-N含量,分析COD_(Cr)和NH_3-N在沿程和垂向上的分布特征及其成因。结果表明,底泥中污染沿程分布呈不规则波状起伏,东大盈河、蕴藻浜、盐铁塘、封浜、华漕港、新槎浦等支流口,浮泥层中COD_(Cr)含量达2万mg/kg,超过背景值2—3倍,支流口下游200m范围内均较高;黄渡小支流口、华漕港支流口浮泥层中NH_3-H含量达250mg/kg,超过背景值3倍。在垂向分布上,底泥柱样都出现峰值分布,在某些弯道及支流口出现递减分布。底泥耗氧污染程度主要与支流及其排污量有关,其次是弯道凸岸处污染物易于沉积富集。这为苏州河市郊段环境综合治理、底泥疏浚和处置提供了科学依据。     

Territorial User Rights for Fisheries as Ancillary Instruments for Marine Coastal Conservation in Chile

Territorial user rights for fisheries have been advocated as a way to achieve sustainable resource management. However, few researchers have empirically assessed their potential as ancillary marine conservation instruments by comparing them to no‐take marine protected areas. In kelp (Lessonia trabeculata) forests of central Chile, we compared species richness, density, and biomass of macroinvertebrates and reef fishes among territorial‐user‐right areas with low‐level and high‐level enforcement, no‐take marine protected areas, and open‐access areas in 42 100‐m subtidal transects. We also assessed structural complexity of the kelp forest and substratum composition. Multivariate randomized permutation tests indicated macroinvertebrate and reef fish communities associated with the different access regimes differed significantly. Substratum composition and structural complexity of kelp forest did not differ among access regimes. Univariate analyses showed species richness, biomass, and density of macroinvertebrates and reef fishes were greater in highly enforced territorial‐user‐right areas and no‐take marine protected areas than in open‐access areas. Densities of macroinvertebrates and reef fishes of economic importance were not significantly different between highly enforced territorial‐user‐right and no‐take marine protected areas. Densities of economically important macroinvertebrates in areas with low‐level enforcement were significantly lower than those in areas with high‐level enforcement and no‐take marine protected areas but were significantly higher than in areas with open access. Territorial‐user‐right areas could be important ancillary conservation instruments if they are well enforced. Derechos de Usuario Territoriales para Pesquerías como Instrumentos Accesorios para la Conservación Marina Costera en Chile     

When and how to use Q methodology to understand perspectives in conservation research

Understanding human perspectives is critical in a range of conservation contexts, for example, in overcoming conflicts or developing projects that are acceptable to relevant stakeholders. The Q methodology is a unique semiquantitative technique used to explore human perspectives. It has been applied for decades in other disciplines and recently gained traction in conservation. This paper helps researchers assess when Q is useful for a given conservation question and what its use involves. To do so, we explained the steps necessary to conduct a Q study, from the research design to the interpretation of results. We provided recommendations to minimize biases in conducting a Q study, which can affect mostly when designing the study and collecting the data. We conducted a structured literature review of 52 studies to examine in what empirical conservation contexts Q has been used. Most studies were subnational or national cases, but some also address multinational or global questions. We found that Q has been applied to 4 broad types of conservation goals: addressing conflict, devising management alternatives, understanding policy acceptability, and critically reflecting on the values that implicitly influence research and practice. Through these applications, researchers found hidden views, understood opinions in depth and discovered points of consensus that facilitated unlocking difficult disagreements. The Q methodology has a clear procedure but is also flexible, allowing researchers explore long‐term views, or views about items other than statements, such as landscape images. We also found some inconsistencies in applying and, mainly, in reporting Q studies, whereby it was not possible to fully understand how the research was conducted or why some atypical research decisions had been taken in some studies. Accordingly, we suggest a reporting checklist.