上海某饮用水源地不同形态氮的时空分布研究

在2010~2012年进行的上海某水源地水质监测资料的基础上,应用纳氏试剂分光光度法等分析方法研究该水源地2011年1~10月总氮、氨氮、硝酸盐氮、亚硝酸盐氮等不同形态的氮素在水体中的空间分布规律及时间变化规律。并就其氮的来源、迁移转化机理和对氮的迁移转化有较大影响的因素进行研究和分析,得出该水库水体中各种形态氮以硝酸盐氮为主,平均占总氮的71.6%,氨氮及亚硝酸盐氮各占总氮的4.39%及0.95%;水体中的温度、光照条件、溶解氧、点位位置分布、水深等是影响各氮形态含量与分布的重要环境因子。     

五日生化需氧量测定的影响因素

五日生化需氧量是一种表间接表示水体中有机物含量,是水质监测的一个重要参数。本文对水样的保存、溶解氧、pH值、温度、接种稀释水和稀释度等影响测定五日生化需氧量成败的因素进行探讨,并提出相应的解决方法。     

混凝气浮+SBR处理再生花炮纸工艺废水的应用

采用混凝气浮+SBR处理年产1万t再生花炮纸工艺废水,对SS、CODCr、BOD5的处理效率分别为96.2%、96.2%、93.1%,最大日均值排放浓度分别为64mg/L、80.7mg/L、26mg/L,排放负荷分别为0.59kg/t、0.63kg/t、0.22 kg/t,均未超过标准限值的要求(pH范围为6.14-7.20);CODCr年排放总量5.4t小于20t/年;纸浆回收率92.0%、白水回用率94.4%、水循环利用率93.2%达标;实现"三排三率"六达标。     

浅谈热泵技术在兖矿集团的应用

通过对兖矿集团所属煤矿供暖小区的现状以及能耗进行调查、分析,本文就如何采用先进的热泵技术,对矿区燃煤小锅炉进行节能技术改造展开探讨,对类似节能改造有较高借鉴作用。     

农村沼气在北方农业源减排中的应用浅析

农村沼气作为一种特殊的清洁能源,在沈阳市农村节能减排、应对气候变化和发展低碳经济、促进新农村建设方面发挥了巨大的作用。本文通过对沼气工程在北方地区应用的阐述,力图推动北方农村沼气在农业源减排工作中的应用。     

生活垃圾填埋场项目竣工环保验收应注意的问题

生活垃圾填埋场建设项目竣工环境保护验收制度是环境保护工作的重要制度。垃圾填埋场项目竣工环境保护验收情况是环保部门对改项目运行后进行环境管理的主要依据。根据垃圾填埋场项目竣工环境保护验收规范要求和实际工作经验,总结出竣工项目环境保护验收中需要注意的问题,并就问题的原因分析提出注意要点。     

从雾霾防治的环境保护执法问题看行政能力建设

雾霾是近年出现的因空气质量恶化引起的气象灾害,我国多地区均出现过不同程度的雾霾天气。雾霾天气使社会各界对环境的忧虑提升到了空前的高度。本文拟从环境保护行政执法的角度浅谈雾霾防治,阐述了当前雾霾防治的环保执法问题和相关建议。     

活性焦联合脱硫脱硝技术及发展方向

本文介绍了活性焦特点、活性焦联合脱硫脱硝技术的反应机理及工艺流程、活性焦联合脱硫脱硝技术的优缺点及发展方向。指出了活性焦联合脱硫脱硝工艺具有可以实现同时脱除S02、NOx和粉尘,脱除效率高,投资小等优点,通过加热再生活性焦,可获得高浓度的SO2气体,用于生产硫酸、液体二氧化硫或硫磺,有效回收硫资源。该技术具有流程简单、占地面积小、无二次污染、费用低、应用范围广等特点。     

Improvement of welding heat source models for TIG-MIG hybrid welding process

Tungsten inert gas-metal inert gas (TIG-MIG) hybrid welding process is an effective way to improve welding productivity and quality due to advantages of the two processes. Mathematical analysis is crucial to fundamentally understand this synergetic welding process. In this study, based on experimental visualization of arc behaviors, some assumptions are proposed to deduce adaptive plane and volumetric heat source models separately for each involved welding method first. The influence of torch angles on distribution of temperature and geometry of weld bead are calculated and compared with experimental results. It shows that this developed algorithm of heat source can be employed to accurately predict welding process whether the electrode gun is slanted backward or forward to the direction of welding. Then TIG-MIG hybrid welding process is simulated and analyzed without considering the attractive or repulsive force of two arcs. The characteristic of TIG-MIG welding process is discussed compared to single MIG. It lays the foundation for the further research on the interaction of the two arcs during TIG-MIG hybrid welding.     

Warm forming die design,Part II: Parting surface temperature response characterization of a novel thermal finite element modeling code

The majority of the research activities in the area of warm forming are concentrated on demonstrating or simulating the improved formability associated with forming lightweight materials such as aluminum alloys at elevated temperatures. However, the ability to design the proper thermal management system within the forming tool is a critical aspect to delivering this technology as a viable, stable production alternative to traditional stamping. This work begins to address the thermal stability issues of this process by examining the impact of process cycle time on the parting surface temperature response. Cycle times of 10, 15, 30, and 300 s were evaluated using a reciprocating surface and a self-heated experimental block of 1020 steel fitted with resistance cartridge heaters. The presented results indicate that cycle time does not significantly impact the steady-state temperature response at the parting surface for a well-insulated die that has proper thermal management. Parting surface experimental results were compared to values obtained numerically and through the use of the novel thermal finite element analysis software PASSAGE/Forming^®.