Conceptual understandings of the ecological engineering issues: in China and abroad

ＩｎｔｒｏｄｕｃｔｉｏｎＡｓａｎｅｗｂｒａｎｃｈｏｆｅｃｏｌｏｇｙａｎｄａｎｉｎｔｅｒｄｉｓｃｉｐｌｉｎａｒｙｆｉｅｌｄ,ｔｈｅｅｃｏｌｏｇｉｃａｌｅｎｇｉｎｅｅｒｉｎｇｗａｓｉｎｉｔｉａｌｌｙｆｏｒｍｕｌａｔｅｄｉｎｔｈｅｅａｒｌｙ1960ｓ.Ｄｕｒｉｎ...     

Component regulation in novel La-Co-O-C composite catalyst for boosted redox reactions and enhanced thermal stability in methane combustion

A novel La-Co-O-C (LC-C) composites were prepared via a facile co-hydrothermal route with oxides and glycerol and further optimized for methane catalytic activity and thermal stability via component regulation. It was demonstrated that Co₃O₄ phase was the main component in regulation. The combined results of X-ray photoelectron spectroscopy (XPS), temperature-programmed desorption of oxygen (O₂-TPD), temperature-programmed reduction of hydrogen (H₂-TPR), temperature-programmed desorption of ammonia/carbon dioxide (NH₃/CO₂-TPD) revealed that component regulation led to more oxygen vacancies and exposure of surface Co²⁺, lower surface basicity and optimized acidity, which were beneficial for adsorption of active oxygen species and activation of methane molecules, resulting in the excellent catalytic oxidation performance. Especially, the (3.5)LC-C (3.5 is Co-to-La molar ratio) showed the optimum activity and the T₅₀ and T₉₀ (the temperature at which the CH₄ conversion rate was 50% and 90%, respectively) were 318 and 367°C, respectively. Using theoretical calculations and in situ diffuse reflection infrared Fourier transform spectroscopy characterization, it was also found that the catalytic mechanism changes from the “Rideal-Eley” mechanism to the “Two-term” mechanism depending on the temperature windows in which the reaction takes place. Besides, the use of the “Flynn-Wall-Ozawa” model in thermoanalytical kinetics revealed that component regulation simultaneously optimized the decomposition activation energy, further expanding the application scope of carbon-containing composites.     

用MnSO4-Ce(SO4)2协同催化快速测定COD的研究

本文探讨了以MnSO4-Ce(SO4)2复合催化剂代替标准重铬酸钾法中的Ag2SO4，用密封消解法测定废水COD值的可行性，研究了复合催化剂总量、配比、消解时间、溶液酸度等因素对COD测定的影响。通过对各种废水COD值的测定表明，用MnSO4-Ce(SO4)2做催化剂，在165℃，较低酸度，密封消解15min是可行的。     

煤炭非燃料利用与洁净煤技术

煤炭是中国的主要能源和资源，也是主要的污染源。煤炭燃料利用的不洁净使得其能源主导地位受到石油、天然气和新能源越来越大的挑战。寻求合理、高效、洁净的煤炭非燃料利用新途径应当成为煤化工发展的重要方向。本文在分析了煤炭燃料利用存在问题和前景的基础上，强调煤炭非燃料利用应当成为洁净煤技术的一种主要形式，并指出煤炭非燃料利用的合理途径。     

高浓度Cl-水样CODcr的测定

阐述了高浓度Cl-水样,以铬酸钾做指示剂,加入适量的硝酸银,形成AgCl沉淀,消除了Cl-的干扰,再用离心沉淀机充分沉淀,取上清液,用COD快速测定仪测定CODcr,有很高的准确度,符合测定要求.     

北武夷下汪家铜多金属矿床地质特征及成因分析

下汪家铜多金属矿床形成于燕山晚期，成矿流体主要来自岩浆期后热液，断裂和岩浆岩是两大重要的成矿条件。控矿构造为北北东向断裂。成矿流体和主要矿质均源于地球深部，以上地幔或壳幔混合带为主，与燕山晚期富碱岩浆活动密切相关。下汪家铜多金属矿床成因上的分析，对该区下一步的找矿工作具有指导意义。     

Ag/Al2O3催化剂用于碳氢化合物选择性还原NO

比较了富氧条件下CH4、C3H8、C3H6和C2H5OH分别用作还原剂时,NO在Ag/Al2O3催化剂上的还原活性.结果表明, CH4和C3H8还原NO的活性很低,而C3H6和C2H5OH能有效地还原NO.在此基础上,研究了H2O和SO2对C3H6和C2H5OH在Ag/Al2O3催化剂上还原NO活性的影响.结果表明,H2O的存在会降低低温区的NO还原活性,而且这种影响是可逆的.将H2O 和SO2同时加入反应混合气,引起NO还原活性较大幅度降低,结合程序升温脱附实验结果,认为可能是由于存在SO2时,Ag/Al2O3催化剂吸附NO的能力降低.     

简述日本降低燃煤锅炉NOX产生的实用技术

简要介绍了日本降低燃煤锅炉ＮＯＸ产生的实用技术，从ＮＯＸ的产生机制入手，以抑制ＮＯＸ的产生为目的，叙述了改善燃烧方法及改善燃烧器的原理，模式图及实用现状。     

氧化塘合理的设计与操作

氧化塘不但可以低费用的降解废水，而且可以提供有用的生物量，其关键是进行合理的设计、操作和去除污泥．本文综合国外的文献资料，提出合理的设计和操作方案，并且引用国外试验者开发的预测模型；同时提出操作过程加入适当的ＣａＣｌ２化学添加剂可以促进藻类生物量的絮凝，以保证出水的质量和提供可利用的生物量．     

高硫型煤固硫粘结剂的研究与型煤固硫

介绍了新研制的高硫型煤固硫粘结剂及其生产的固硫型煤。试验表明：该固硫型煤不仅受冷，热强度高，而且能够有效地控制和降低燃煤硫的污染。