Particle emissions of a railway line determined by detailed single particle analysis

The goal of this study was to identify and quantify particles emitted from railway traffic. For that purpose PM10 samples were collected near a busy railway line using a wind direction and speed controlled sampling equipment consisting of five devices. Measurements taken perpendicular to the railway lines at 10, 36 and 120 m distance enable an identification and separation of particles caused by the railway traffic from background particles. Morphology and chemistry of more than 11,000 particles were analysed by computer controlled scanning electron microscopy (CCSEM). Based on chemical composition five particle classes are defined and assigned to their sources. The mass of the individual particles is determined by multiplying their volumes, calculated based on their morphology with a density assigned specifically to each particle class. The density of the particle classes is derived from their chemical composition. To estimate the PM10 contributions of the railway lines, the mass of PM10 at 120 m (background, not influenced by the railway lines) is subtracted from the mass of PM10 at 10 m. The emissions of the railway lines are dominated by ‘iron’ particles, which contribute 2.9 μg m⁻³ or 67% to the railway related PM10. In addition, ‘aluminium’ and ‘calcium’ particles contribute also to the railway related PM10 (1.0 μg m⁻³ or 23% for the ‘aluminium’ and 0.4 μg m⁻³ or 10% for the ‘calcium’ particles). These particles are assigned to abrasion of the gravel bed and re-suspension of mineral dust.Long-term gravimetric results of the contribution of iron to the mass of railway related PM10 from a study performed earlier at the same site are in good agreement with the data presented in this study.     

Colloid migration in symmetrical non-uniform fractures: particle tracking in three dimensions

A three-dimensional model for the migration of colloids in a saturated fracture is presented, which considers the motion of colloids as a result of advection and diffusion, as well as colloid-surface interactions at the fracture walls. This model is successfully incorporated into a three-dimensional particle tracking algorithm that tracks particles within a continuum and allows consideration of the migration of colloids in symmetrical, three-dimensional, non-uniform fractures. The framework is general enough to incorporate non-local interactions that provide colloid motion relative to the fluid. The algorithm is verified against classical Taylor dispersion, and its generalization to a sorbing phase, in a uniform fracture and shows excellent agreement with theory. A simple, non-uniform fracture that has an analytically tractable velocity field is also considered, and both quantitative and qualitative comparisons are made with the uniform fracture case. The modelling of more complex fracture geometries is also discussed and a particular case is implemented within the particle tracking framework.     

A hybrid method for inverse characterization of subsurface contaminant flux

The methods presented in this work provide a potential tool for characterizing contaminant source zones in terms of mass flux. The problem was conceptualized by considering contaminant transport through a vertical "flux plane" located between a source zone and a downgradient region where contaminant concentrations were measured. The goal was to develop a robust method capable of providing a statement of the magnitude and uncertainty associated with estimated contaminant mass flux values. In order to estimate the magnitude and transverse spatial distribution of mass flux through a plane, the problem was considered in an optimization framework. Two numerical optimization techniques were applied, simulated annealing (SA) and minimum relative entropy (MRE). The capabilities of the flux plane model and the numerical solution techniques were evaluated using data from a numerically generated test problem and a nonreactive tracer experiment performed in a three-dimensional aquifer model. Results demonstrate that SA is more robust and converges more quickly than MRE. However, SA is not capable of providing an estimate of the uncertainty associated with the simulated flux values. In contrast, MRE is not as robust as SA, but once in the neighborhood of the optimal solution, it is quite effective as a tool for inferring mass flux probability density functions, expected flux values, and confidence limits. A hybrid (SA-MRE) solution technique was developed in order to take advantage of the robust solution capabilities of SA and the uncertainty estimation capabilities of MRE. The coupled technique provided probability density functions and confidence intervals that would not have been available from an independent SA algorithm and they were obtained more efficiently than if provided by an independent MRE algorithm.     

Methane fluxes from tundra soils and snowpack in the maritime Antarctic

Methane fluxes were measured from three exposed tundra sites and four snowpack sites on the Fildes Peninsula in the maritime Antarctic in the summertime of 2002. The average fluxes at two normal tundra sites were −15.3 μg m⁻² h⁻¹ and −14.3 μg m⁻² h⁻¹, respectively. The fluxes from tundra site with fresh penguin dropping addition showed positive values with the average of 36.1 μg m⁻² h⁻¹, suggesting that the deposition of fresh droppings greatly enhanced CH₄ emissions from the poor Antarctic tundra during penguin breeding periods. The summertime variation in CH₄ flux was correlated with surface ground temperature and the precipitation. The correlation between the flux and PT₀, which is the product of the precipitation and surface ground temperature, was quite strong. The diurnal cycle of CH₄ flux from the tundra soils was not obtained due to local fluky weather conditions. The fluxes through four snowpack sites were also obtained by the vertical CH₄ concentration gradient and their average fluxes were −46.5 μg m⁻² h⁻¹, −28.2 μg m⁻² h⁻¹, −46.4 μg m⁻² h⁻¹ and −17.9 μg m⁻² h⁻¹, respectively, indicating that tundra soils under snowpack also consume atmospheric CH₄ in the maritime Antarctic; therefore these fluxes could constitute an important part of the annual CH₄ budget for Antarctic tundra ecosystem.     

膜生物反应器在污水处理中的应用现状及展望

综述了膜生物反应器（MBR）的研究进展，介绍了其分类及特点、处理机理与MBR运行的影响因素以及膜污染的控制等，并概括了MBR的发展及展望。MBR是近来发展较迅速的一种污水治理设备，具有占地少、能耗低等优点，但也存在一定的缺点，其中膜污染是影响其推广应用的主要因素，目前国内外学者一般都以膜污染作为切入点进行研究，通过改变料液性质、优化操作参数、提高膜清洗效率等方法得以防治膜污染。     

Chemical composition of rainwater in the northeastern Romania, Iasi region (2003–2006)

Chemical composition of rainwater was studied in the northeastern Romania, Iasi region, and the concentrations of major inorganic and organic ions were measured in samples collected between April 2003 and December 2006. The pH of the rainwater is 5.92 (volume weighted mean average, VWM) suggesting a sufficient load of alkaline components neutralizing its acidity. On average, 97% of the acidity in the collected samples is neutralized by CaCO₃ and NH₃. Clear seasonal variations were observed for some of the identified ions (e.g., SO₄²⁻, NO₃⁻, Ca²⁺, NH₄⁺). The data obtained during this work revealed that both concentrations and fluxes of anthropogenic source-related ions (e.g., SO₄²⁻, NO₃⁻ and NH₄⁺) are among the highest reported for European sites. It is shown that meteorology and long-range transport processes may concur to their high levels.     

Comment on “Analysis of groundwater contamination using concentration-time series recorded during an integral pumping test: Bias introduced by strong concentration gradients within the plume” by Allelign Zeru and Gerhard Schäfer

We consider the results of a recent paper in this journal [Zeru, A. and Schäfer, G., 2005. Analysis of groundwater contamination using concentration–time series recorded during an integral pumping test: Bias introduced by strong concentration gradients within the plume. Journal of Contaminant Hydrology 81 (2005) 106–124], which addresses the field-scale characterisation of contaminant plumes in groundwater. There, it is concluded that contaminant concentration gradients can bias Integral Pumping Test (IPT) interpretations considerably, in particular if IPTs are conducted in advective fronts of contaminant plumes. We discuss implications of this setting and also argue that the longitudinal and transverse dispersivities used in the examples of Zeru and Schäfer (2005) of up to 30 m and 3 m, respectively, are generally very high for the here relevant capture zone scale (< 20 m). However, regardless of both longitudinal and transverse concentration gradients, we further show through a counter-example that IPT results are unbiased as long as the concentration attenuation along the flow direction is linear over the capture zone extent.     

Calibration and testing of a dynamic flow-through chamber for field determination of methyl bromide volatilization flux

Accurate emission measurement of highly volatile chemicals such as methyl bromide (MeBr) is a crucial step in assessing their potential for environmental contamination. Use of flux chambers is a simple method for measuring emission rate under field conditions. To validate the applicability of a dynamic flow-through chamber for measuring MeBr emission, we provide a complete presentation of calibration and testing of the chamber. The calibration was made under a controlled system subject to ambient temperature changes. Two field experiments were conducted to test the chamber for measuring MeBr flux under conditions similar to commercial soil fumigation practices. In both the calibration and the two field experiments, the chamber provided accurate emission estimates. The maximum mass balance error was < 10% which is comparable to the micrometerological method. Because of its simplicity, we believe this dynamic flux chamber can be used reliably in quantifying the emission dynamics of highly volatile chemicals such as MeBr.     

高气泡表面积通量浮选柱气浮除藻的研究

湖泊、水库等水源的富营养化，使藻类去除成为饮用水生产的重要任务。本研究采用高气泡表面积通量浮选柱气浮除藻，考察了混凝剂、气泡表面积通量和浮选柱高度等因素的影响。试验表明，高气泡表面积通量浮选柱气浮可高效地去除绿藻、硅藻和蓝藻，叶绿素a和藻类去除率达95％以上，比传统浮选柱气浮和沉降作业有较大幅度提高。与普通气浮柱比较，高气泡表面积通量浮选柱增加了气泡与藻的碰撞几率，防止因大表观充气速率造成的紊流和扰动，使气泡／藻结合体有相对静态的浮升环境，避免了气泡／藻结合体在浮升过程中的脱落，实现对藻类的迅速捕集和转移。     

太湖藻型湖区CH4冒泡通量

冒泡是甲烷排放的主要途径之一,为量化太湖藻型湖区CH₄冒泡通量及其占总通量的比例,本研究采用静态箱-便携式温室气体自动分析仪方法对春、夏季太湖梅梁湾进行了多日连续观测.结果表明,太湖藻型湖区春、夏季CH₄冒泡通量均存在白天高于夜间的日变化特征.春、夏季CH₄冒泡通量分别为1.843、104.497nmol/（m²·s）,占总通量的比例分别为31.2%和68.6%,即冒泡是夏季CH₄排放的主要方式,而春季CH₄排放则以扩散为主.在小时及日尺度上,CH₄冒泡通量与温度（气温、表面水温和底泥温度）和气压显著相关,且随着温度升高、气压降低,CH₄冒泡排放分别呈指数增加和线性增加趋势.本研究可为准确估算太湖流域CH₄总排放量及明确我国湖泊对全球碳循环的贡献提供重要的基础数据.