张家口市沙尘天气过程气溶胶单颗粒特征研究

利用单颗粒气溶胶质谱仪对张家口市2015年春季的一次典型沙尘过程进行了监测,分析了沙尘过程对当地大气颗粒物成分的影响。结果表明,监测期间的颗粒物类型主要分为8种:矿物质(MD)、左旋葡聚糖(LEV)、元素碳(EC)、有机碳(OC)、混合碳(ECOC)、重金属(HM)、富钾(K)、其他(Other)。对比沙尘天气来临前、中、后3个时段,随着沙尘天气的来临,本地大气颗粒物成分发生较大变化,矿物质、左旋葡聚糖等成分含量升高,而有机碳、重金属等成分含量下降,其中矿物质在PM10峰值时段小时比例高达27.8%;沙尘天气期间,由于矿物质颗粒占比增加,使得总颗粒物的粒径分布向0.9μm以上的粗粒径段偏移;此外,沙尘天气期间的颗粒物各成分与二次组分的混合程度相较非沙尘天气时段的低,说明其老化程度相对较低。     

On-chip waste heat-driven absorption cooling system for sustainable data center environment: simulation

Development of waste heat-driven absorption-based cooling system is inspired for the need of removing high heat flux from the sustainable data centre environment. This paper presents a simulation study of single-stage Lithium Bromide–Water (LiBr–H₂O) vapour absorption heat pump for chip cooling. In the present work, a complete thermodynamic analysis of the single-stage LiBr–H₂O vapour absorption-based heat pump for chip cooling without a solution heat exchanger is performed and a user friendly graphical user interface (GUI) package including visual components is developed by using MATlab (2008b). The effect of chip heat flux on COP (Coefficient of Performance), flow rates and conductance is examined using the developed package. The model is verified using the data available in the literature which indicates that there is a greater reduction in the absorber load. The influence of chip heat flux on the performance and thermal loads of individual components are studied, and it is concluded that COP decreases from 0.7121 to 0.68924 with increase in chip heat flux.     

储罐底板维修决策方法研究

储罐底板腐蚀是储罐失效的主要原因之一,对底板的腐蚀检测方法目前有很多种。每种方法都有自己的优势,但同时也存在着相应的弊端。通过在实践应用中对比漏磁检测与超声测厚检测方法,分别指出两种检测方法的优势与实践应用中存在的问题,提出应综合应用两种方法来提高效率和确保准确性。为更好地利用检测技术保障储罐安全提出参考建议。     

Flame propagation through dust clouds of nano and micron scale aluminum particles

Temperature measurement on propagating flame and minimum explosible concentration are investigated. The dust explosion experiments of nano-particle dust clouds exhibit higher temperature gradient in preheat zone and lower MEC than those of micron particle dust clouds. A heterogeneous model is proposed to describe the oxidation process under two extreme conditions: whether the alumina film is involved in the reaction or not. The new methodology allows the estimation of oxidation kinetics of growing alumina. For micron particle, the model clarifies that the activation energy which has been wrongly considered to be for aluminum oxidation should be for lattice diffusion, and the initial reaction rate is proved to be dominated by the diffusion rate of oxygen through alumina shell as diffusion controlled reaction. For nano-particle, the model explained that why the reported activation energy shows significantly lower than that for micron particle, due to initially ignorable alumina film or considered as kinetically controlled reaction. However, as reaction occurs and alumina builds up on the surface, the interference of alumina somewhat increases the activation energy.     

UF-RO-NF应用于电镀镍漂洗废水回用中试研究

采用“UF-RO-NF”中试装置处理电镀镍漂洗废水,在周期运行的工况下,考察其浓淡水回用效果以及膜通量变化情况。研究表明,该套系统淡水COD、Ni离子、电导率的平均值为70.6 mg/L、2.93 mg/L、91.1μs/cm^2,远低于该生产车间镀镍漂洗水,可以回用。浓水COD、Ni离子、电导率相对于漂洗水均有4倍以上的浓缩效果,具有一定的回用价值。整个系统在试验运行10个周期内膜通量保持不变。     

Advances In Out Door Lysimeter Techniques

Different methods exist for measuring soil water and solute fluxes in and below the root zone and have been critically reviewed. Besides indirect methods (e.g. water balance, tensiometer, time domain reflectometry – TDR, frequency domain reflectometry – FDR, environmental tracer) direct methods (e.g. drainage-type lysimeter, water fluxmeter) have a long tradition and have been successfully used in seepage research. A large weighable out door lysimeter is the best method for obtaining reliable data about seepage water quantity and quality, but it involves significant investment and additional expenses for maintenance. To tackle this problem new methods for the vertical collection of large volume soil monoliths (up to 6 m³) as well as for the horizontal collection (up to 6 m³) have been developed. For the placement of the lysimeter a container lysimeter unit was constructed, which is cheaper than a conventional steel or concrete cellar. Furthermore, the technical design of the newly developed lysimeter types as a weighable gravitation lysimeter, a weighable groundwater lysimeter and a lateral flow lysimeter are presented.     

Using turbidity and acoustic backscatter intensity as surrogate measures of suspended sediment concentration in a small subtropical estuary

The suspended sediment concentration is a key element in stream monitoring, although the turbidity and acoustic Doppler backscattering may be suitable surrogate measures. Herein a series of new experiments were conducted in laboratory under controlled conditions using water and mud samples collected in a small subtropical estuary of Eastern Australia. The relationship between suspended sediment concentration and turbidity exhibited a linear relationship, while the relationships between suspended sediment concentration and acoustic backscatter intensity showed a monotonic increase. The calibration curves were affected by both sediment material characteristics and water quality properties, implying that the calibration of an acoustic Doppler system must be performed with the waters and soil materials of the natural system. The results were applied to some field studies in the estuary during which the acoustic Doppler velocimeter was sampled continuously at high frequency. The data yielded the instantaneous suspended sediment flux per unit area in the estuarine zone. They showed some significant fluctuations in instantaneous suspended mass flux, with a net upstream-suspended mass flux during flood tide and net downstream sediment flux during ebb tide. For each tidal cycle, the integration of the suspended sediment flux per unit area data with respect of time yielded some net upstream sediment flux in average.     

Release of polycyclic aromatic hydrocarbons from Yangtze River sediment cores during periods of simulated resuspension

The role of resuspension duration on release of 16 PAHs was measured experimentally using a particle entrainment simulator (PES). Three sediment cores were resuspended for 12h at 0.2 and 0.5N m(-2). PAHs in water column and total suspended solids (TSS) were monitored at intervals. After 0.25h of resuspension, PAH release was on average 42% of their concentrations after 12h of resuspension, indicating fast release of PAHs from sediments in an initial short time. Moreover, PAHs released faster at 0.5N m(-2) than at 0.2N m(-2); low molecular weight PAHs (2-3-ring) released faster than median molecular weight (4-ring) PAHs. PAH concentrations in TSS showed generally increase with time and differences in magnitudes based on sediment type and energy. Overall, the composition of sediments is the major factor in determining the amount of released PAHs, more so than the level of resuspension energy applied.     

海河沉积物对邻苯二甲酸二甲酯吸附行为研究

邻苯二甲酸二甲酯(DMP)是一种广泛使用的化工原料,也是一种环境内分泌干扰物.研究了海河沉积物和土壤对DMP的吸附解吸作用,以及颗粒物粒径、浓度和离子浓度对DMP在颗粒物上吸附的影响.研究发现DMP在土壤上的吸附符合Langmuir等温式,在海河沉积物上的吸附符合线性等温式,单位吸附量随着颗粒物浓度的增大而减小,离子浓度的增大而增大,粒径对DMP的吸附影响不明显.用DMP将海河沉积物污染并于室温老化1个月后进行解吸实验,被吸附DMP解吸速率前20 h较快,以后逐渐达到吸附平衡,解吸量较小.