Evaluation of ogawa passive sampling devices as an alternative measurement method for the nitrogen dioxide annual standard in El Paso, Texas

Nitrogen Dioxide (NO₂) is a common urban air pollutant that results from the combustion of fossil fuels. It causes serious human health effects, is a precursor to the formation of ground level ozone, another serious air pollutant, and is one of the six criteria air pollutants established by the United States (U.S.) Clean Air Act (CAA). Ogawa Passive Sampling Devices (PSDs) for NO₂ were collocated and operated at six NO₂ Federal Reference Method (FRM) monitor locations in the El Paso, Texas area for the 2004 calendar year. Passive samples were taken at 2-week, 3-week, and 4-week intervals and compared against the continuously operating FRM monitors. Results showed that the collective NO₂ annual arithmetic mean for all passive monitors was identical to the NO₂ mean for all FRM monitors. Of the individual locations, three passive annual NO₂ means were identical to their corresponding FRM means, and three passive annual NO₂ means differed from their corresponding FRM means by only one part per billion (ppb). Linear correlation analysis between all readings of the individual NO₂ PSDs and FRM values showed an average absolute difference of 1.2 ppb with an r ² of 0.95. Paired comparison between high and low concentration annual NO₂ sites, seasonal considerations, and interlab quality control comparisons all showed excellent results. The ease of deployment, reliability, and the cost-savings that can be realized with NO₂ PSDs could make them an attractive alternative to FRM monitors for screening purposes, and even possibly an equivalent method for annual NO₂ monitoring. More tests of the Ogawa NO₂ PSD are recommended for different ecosystem and climate regimes.     

粉尘点污染扩散模型的可视化研究

在分析和总结了瞬时点尘源在静止流体、均匀紊流和湍流条件下扩散模型的数学表达式和浓度分布方程的基础上,运用Matlab软件进行可视化处理,生成一系列的三维图形,可从不同的角度进行观察和分析,使之能够直观、形象的了解粉尘扩散过程,并从中了解到粉尘扩散的一些特点,该项研究对粉尘防治工作与危害预测都有重要的理论与实践意义。     

环境规制对城市生态技术扩散效率的影响研究

生态技术扩散是长江经济带生态文明建设的必要环节,也是企业履行环保责任的有效措施。本文以长江经济带110个地级及以上城市为研究对象,采用非径向方向距离函数对城市工业企业生态技术扩散效率进行测算,分别从整体和区域异质性角度实证分析环境规制对城市工业企业生态技术扩散效率的影响及内在机理。结果表明：长江经济带城市环境规制与生态技术扩散效率存在倒“U”形关系,环境规制对生态技术扩散效率还存在多重影响路径,外商直接投资和工业集聚在影响路径中分别起着中介作用,且外商直接投资和工业集聚的链式中介显著。在异质性分析中,发现环境规制、外商直接投资、工业集聚和生态技术扩散效率之间的关系因区域位置不同而存在差异性。为此,依据研究结论及环境规制实施现状提出相应的政策建议,实现长江经济带经济永续绿色发展目标。     

中国低碳城市试点的政策设计逻辑

政策试点是中国国家治理策略体系的重要组成部分,是中国政府遵循“由点到面”逻辑以试验手段制定政策的一种常规性工作方法。低碳城市试点是中国应对气候变化战略的重要组成部分,通过选择不同类型、不同发展阶段、不同资源禀赋的地区开展试点,探索经济增长与碳排放脱钩的模式。现有文献侧重低碳城市建设的内涵、建设模式与路径、温室气体的核算方法、政策手段、峰值研究与达峰路径、效果评估等,有力地支持了低碳城市建设决策,但对于低碳城市试点的政策设计鲜有涉及。本文从政策过程理论、央地关系两个视角,结合府际学习与竞争关系,建构了中国低碳城市政策“试点–扩散”机制与政府行为的分析框架。中国的低碳城市试点具有探索型开拓性、综合型专业性、授权型自主性的特点,结合三批低碳城市试点的文件要求和实践进展,从政策试点的选点、设计、执行、监督和评估五个方面对于中国低碳城市试点进行了系统的梳理分析。相较于经济领域的其他政策试点,低碳城市政策试点具有弱激励弱约束的政策环境。地方政府基于自身的学习能力和领导力,在政策创新方面表现出争先、自主、效仿和守成四种行为特征,并以杭州、深圳、镇江、成都四个表率城市做了实证。政策“试点-扩散”的过程从本质上讲是中国政策创新与扩散的过程,可能在现实中需要往复多次进行,中国已陆续开展的三批低碳城市试点工作就遵循这样的政策逻辑。试点的意义是试出问题、解决问题、积累经验。从前三批试点城市评估结果来看,试点城市在低碳发展目标设定、转型路径探索和低碳发展动力转换等方面与社会的预期仍有差距,为此本文提出了推进低碳城市建设的四点建议:一是激发城市低碳发展的内生动力;二是完善低碳城市试点的科学论证机制;三是建立激励与约束并举的长效机制;四是强化市场公平竞争的政策导向。     

铁磁流体对煤粒瓦斯解吸性能影响实验研究*

为探究铁磁流体对煤体瓦斯解吸性能的影响,采用水浴恒温吸附解吸系统,开展0.44,0.65,1.14 MPa 3组不同平衡压力下加铁磁流体前后的瓦斯解吸对比实验,根据Langmuir方程经验公式计算瓦斯极限解吸量和初始扩散系数,分析铁磁流体对煤体瓦斯解吸影响的机理。结果表明:在3组不同平衡压力下加入铁磁流体后瓦斯极限解吸量由2.5,10,20 mL/g降低为2.22,3.33,10 mL/g,降低11.2%,66.7%,50%;初始扩散系数由0.997 1,1.629 9,3.888 3 μm2·s降低为0.685 5,0.997 1,2.933 5 μm2·s,降低31.25%,38.82%,24.56%。在铁磁流体的作用下,煤体瓦斯解吸性能得到大幅降低。     

Diffusive gradients in thin films using molecularly imprinted polymer binding gels for in situ measurements of antibiotics in urban wastewaters

• Selective molecularly imprinted polymer (MIP) binding gel was prepared. • MIP-DGT showed excellent uptake performance for antibiotics. • In situ measurement of antibiotics in wastewaters via MIP-DGT was developed. • The MIP-DGT method was robust, reliable, and highly sensitive. Urban wastewater is one of main sources for the introduction of antibiotics into the environment. Monitoring the concentrations of antibiotics in wastewater is necessary for estimating the amount of antibiotics discharged into the environment through urban wastewater treatment systems. In this study, we report a novel diffusive gradient in thin films (DGT) method based on molecularly imprinted polymers (MIPs) for in situ measurement of two typical antibiotics, fluoroquinolones (FQs) and sulfonamides (SAs) in urban wastewater. MIPs show specific adsorption toward their templates and their structural analogs, resulting in the selective uptake of the two target antibiotics during MIP-DGT deployment. The uptake performance of the MIP-DGTs was evaluated in the laboratory and was relatively independent of solution pH (4.0–9.0), ionic strength (1–750 mmol/L), and dissolved organic matter (DOM, 0–20 mg/L). MIP-DGT samplers were tested in the effluent of an urban wastewater treatment plant for field trials, where three SA (sulfamethoxazole, sulfapyridine, and trimethoprim) and one FQ (ofloxacin) antibiotics were detected, with concentrations ranging from 25.50 to 117.58 ng/L, which are consistent with the results measured by grab sampling. The total removal efficiency of the antibiotics was 80.1% by the treatment plant. This study demonstrates that MIP-DGT is an effective tool for in situ monitoring of trace antibiotics in complex urban wastewaters.     

An Experimental Methodology for Monitoring Contaminant Transport Through Geotechnical Centrifuge Models

In this paper, an attempt has been made to highlight an experimental methodology for monitoring contaminant transport through locally available silty soil and commercially available clay in geotechnical centrifuge models, for different compaction states. Use of multiple depth sensors to determine depth distribution of sodium chloride in the soil column has been detailed. The obtained results have been compared with argentometric method. To validate the centrifuge modelling, modelling of models has been used. The test setup developed can simulate contaminant transport mechanisms through the soil mass, which is approximately 10 m deep, over a period of 600 days. R _e and P _e are found to be N times higher in the centrifuge models. These numbers are found to be several orders less than unity. This indicates that laminar flow prevails and the dominating Cl⁻ transport mechanism in centrifuge is diffusion. The study also highlights the fact that the geotechnical centrifuge modelling can be used as a viable alternative to field scale experimentation.     

Temperature Effect on Migration of Zn and Cd Through Natural Clay

To investigate the effect of temperature on effective diffusion coefficients and retardation factors for Zn and Cd, combined diffusion and sequential extraction analyses were conducted at 15 ^˚C and 55 ^˚C. The effective diffusion coefficients of the metals increased up to ten times according to the increased temperature. On the other hand, the effect of temperature on the retardation factor depended on the retention mechanisms of the metals. The distribution coefficient for Zn, which was mainly partitioned in the carbonate phase, increased up to two times with the increase in temperature. On the other hand, the distribution coefficient for Cd, which was mainly partitioned in the exchangeable phase, was hardly affected by the temperature change. Results of combined diffusion and sequential extraction analysis showed that the effect of temperature on the heavy metals’ (Zn and Cd) migration through the compacted natural clay was influenced by the combined effects of the diffusion coefficient and the retardation factor. Additionally, we could also observe the change in retention mechanism for the metals with the change in pore water concentration.     

钙基脱硫剂孔隙中SO2气体非线性扩散的研究

以动态生成的CaO孔隙网络为骨架,按照不退行随机行走模型（NRRW）,模拟气体分子在CaO孔隙中的扩散过程,计算了SO2分子的扩散系数和行走维数,并在SO2非线性扩散反应方程基础上,分析了CaO颗粒孔隙中SO2浓度的分布特性。