太原市大气扩散示踪试验

太原市位于山西中部,东、西两山夹峙,汾河南北中贯,地形北部较高,南部开放,西部有一缺口,是一个封闭不完全的盆地。风速较小,1971—1980年平均风速为2.5m/s,静风频率为24％。在无系统天气过境时,近地层气象十分复杂,城南和城北、河东和河西的地面风往往不同。 近年来,太原市大气污染日趋严重,我们于1985年10—11月在太原地区进行了大气扩散示踪试验,以期能对该地区大气污染物的输送和扩散有所了解。     

A study on emission of phthalate esters from plastic materials using a passive flux sampler

Phthalate esters are used as plasticizer in many plastics, and several studies have shown their toxicity. Phthalate esters are gradually emitted over time, and so it is conceivable that they pose a significant health risk. This study aims to investigate the temperature dependence of the emissions of various phthalate esters and to estimate the health risks of these emissions at various temperatures. A passive-type sampler was developed to measure the flux of phthalate esters from the surface of plastic materials. With this sampler, we examined three widely used plastic materials: synthetic leather, wallpaper and vinyl flooring. The observed maximum emissions of diethyl phthalate, dibutyl phthalate, and diethylhexyl phthalate (DEHP) from these materials at 20°C were 0.89, 0.77, and 14 μg m⁻² h⁻¹, respectively. Emissions at 80°C were 2.8, 4.5×10², and 1.5×10³ μg m⁻² h⁻¹, respectively. The results showed this temperature dependence is determined primarily by the type of phthalate ester and less so by the type of material. The estimation from the results of temperature dependence indicated the concentration of DEHP in a vehicle left out in the sunshine during the day can exceed the recommended levels of Japan Ministry of Health, Labour and Welfare.     

A comparison of chemical MSW compositional data between China and Denmark

Chemical waste compositions are important for municipal solid waste management, as they determine the pollution potentials from different waste strategies. A representative dataset for chemical characteristics of individual waste fractions is frequently required to assess chemical waste composition, but it is usually reported in developed countries and not in developing countries. In this study, a dataset for Chinese waste was established through careful data screening and assessment, named as CN dataset. Meanwhile, a dataset for Danish waste (DK dataset) was also summarized based on previous studies. In order to quantitatively evaluate the reliabilities of CN and DK datasets, the chemical waste compositions in four Chinese cities were estimated by utilizing both of them, respectively. It is indicated that the usage of CN datasets led to significantly lower discrepancies from the actual values based on laboratory analysis in most cases. Within the datasets, the moisture contents of food waste, paper, textiles, and plastics, the carbon content of food waste, as well as the oxygen content of plastics would induce significant divergences, which should be paid special attention when gathering the information. In addition, the fractional waste compositions in China showed similar features with other developing countries but differ significantly with developed countries. Thus the above-mentioned conclusions could also be true in other developing countries.     

不同排海方式城市尾水微生物扩散规律

尾水中含有大量病原菌,回用或排入自然水体后会对人群健康和生态安全构成威胁.为了探究不同排海方式对微生物扩散规律的影响,本研究利用高通量测序技术对春季污水处理厂尾水细菌群落结构、优势菌群、典型致病菌及其随扩散距离的变化进行研究.结果发现,先排河后排海的尾水物种更加丰富,分布在58个菌纲,相对丰度大于1%的细菌有32种,而直接排海的尾水中仅有41个菌纲,相对丰度大于1%的细菌有28种.相对于直排过程,间排方式微生物群落结构相对丰度更高,说明尾水的直接排海使得微生物更易扩散.同一污水处理厂优势菌门所占比例随着扩散距离的增大整体呈下降趋势,蓝藻菌门(Cyanobacteria)等由于在自然水体中的高浓度出现随扩散距离增大整体上升的趋势.两个系统的优势菌门都属于变形菌门(Proteobacteria)、拟杆菌门(Bacteroidetes)及厚壁菌门(Firmicutes),纲、种水平重合度较低,但整体来讲排污口附近微生物多样性及丰度远高于海水(空白样品),且污水处理相关菌种丰度较高.另外,尾水中存在一定量的致病菌和条件致病菌,其中Pseudoalteromonas haloplanktis、Pseudomonas anguilliseptica致病性极强,扩散后相对丰度仍然很高,且弓形杆菌属(Arcobacter spp.)与人类和动物的腹泻、菌血症等疾病密切相关.因此,尾水排放过程中应对这几种细菌重点监测.     

天津地区污染天气分析中垂直扩散指标构建及运用

基于255 m气象塔风、温和PM_(2.5)质量浓度数据获取天津地区大气稳定度特征,利用中尺度大气化学模式构建垂直扩散指数β和φ,开展天津地区污染天气预报中垂直扩散分析方法的研究,以期提高天津地区重污染天气预报预警准确率.结果表明,综合运用大气稳定度、基于边界层平均PM_(2.5)质量浓度与近地面PM_(2.5)质量浓度比值构建的垂直扩散指数β,基于数值模式chemdiag功能(以CO为示踪物)构建的垂直扩散指数φ,可以在污染天气预报中较好的进行大气污染物垂直扩散能力分析.当07:00~08:00和18:00~20:00大气稳定度为D及以上时,相比大气稳定为C及以下时,出现重污染天气的概率成10倍的增加;使用垂直扩散指数β和风速双重指标判断重污染天气,比单一的风速指标判断准确率提升67%;垂直扩散指数φ与近地面PM_(2.5)质量浓度相关系数达到0.8,当垂直扩散指数φ小于0.52时,重污染天气概率75%,可识别59%的重污染天气.     

液化和压缩气体半球形扩散模型集的构建和应用

国内外液化和压缩气体的泄漏爆炸事故屡见不鲜,针对其性质和短时间近地面扩散的特点,总结、修正和扩展了瞬时泄漏下的平均半球形扩散模型。对于连续泄漏,利用数学积分理论建立了静风下的半球形扩散模型。接着对有风时的情况进行建模推导,将风速和气体自身扩散速度进行矢量合成,得到了半椭球形扩散和半椭圆锥与1/4椭球体组合扩散下气体的质量浓度和质量浓度变化趋势。最后用实例验证了该模型的先进性。该模型集能较好地反映液化和压缩气体泄漏后不同泄漏情况、时间、近地面区域和风速下的扩散浓度空间分布及其动态变化过程,为事故后果预估和应急救援决策提供参考。     

Analysis of diffusion-adsorption equivalency of landfill liner systems for organic contaminants

The equivalence between multilayered barriers regarding diffusion and adsorption is analyzed by means of an analytical method. The bottom boundary of the liner system is defined by assuming concentration continuous and flux continuous conditions of the contaminant between the bottom liner layer and the underlying soil. Five different liner systems were compared in terms of solute breakthrough time. The results of the analysis show that breakthrough time of the hydrophobic organic compounds for a 2-meter-thick compacted clay liner (CCL) can be 3-4 orders of magnitude greater than the breakthrough time for a geosynthetic clay liner (GCL) composite liner. The GM/GCL and GM/CCL composite liner systems provide a better diffusion barrier for the hydrophilic organic compounds than that for the hydrophobic compounds due to their different Henry's coefficient. The calculated breakthrough times of the organic contaminants for the Chinese standard liner systems were found to be generally greater than those for the GCL alternatives, for the specific conditions examined. If the distribution coefficient increases to 2.8 for the hydrophobic compounds or 1.0 for the hydrophilic compounds, the thickness of the attenuation layer needed to achieve the same breakthrough time as the standard liner systems can be reduced by a factor of about 1.9-2.4. As far as diffusive and adsorption contaminant transport are concerned, GM or GCL is less effective than CCL.     

上海世博规划区交通干道污染物对流扩散研究

采用计算流体动力学(CFD)技术,对不同来流风速大小、风向条件下的上海世博规划区内四条主要交通干道上的交通污染物对流扩散进行了三维数值仿真。获得了不同工况下交通污染物浓度的空间分布。通过数值仿真结果分析,探明了交通干道上的机动车尾气排放对世博规划区内空气质量的影响(各工况下世博规划区内的CO最大浓度为0.25～0.59mg/m3;东南、东北和南风向下规划区内的NO2最大浓度分别为0.037mg/m3、0.03mg/m3和0.03mg/m3,而北风和西风下规划区建筑群内NO2最大浓度分别为0.068mg/m3和0.12mg/m)3,并揭示出应该重视靠近交通干道的建筑物附近的空气质量改善,特别是要重视靠近卢浦大桥两侧的建筑群周围空气质量改善(卢浦大桥两侧的建筑群周围NO2最大浓度已稍大于《环境空气质量标准》规定的一级标准浓度限值)。     

海上溢油扩散图像处理的非线性方法研究

针对海上溢油应急处理问题,本文主要对溢油的初级行为--扩散进行探讨.提出了采用溢油扩散图像来预测溢油扩散未来发展趋势的3步非线性处理过程,即图像边缘检测、面积计算和面积预测,对这一过程中应采用的方法进行了分析与比较.并以奥里油在静止海水中扩散为范例,在MATLAB环境下,利用非线性方法对扩散图像进行边缘监测,通过对梯度算子阀值的调整来计算完整的油膜覆盖面积,并将其计算结果进行BP神经网络预测.结果表明:采用Roberts边缘算子可以得到很好的边缘检测结果,采用BP神经网络获得的面积预测结果与实验结果吻合程度较好.     

Experimental investigation on effect of an absorber plate covered by a layer of sand on the efficiency of passive solar air collector

A passive flat-plate solar air collector was constructed in the laboratory of New and Renewable Energy in Arid Zones, Ouargla University, South East Algeria. The absorber of the passive flat-plate solar air collector was laminated with a thin layer of local sand. This acted as a thermal packed bed with a collecting area of 0.5 m² (1 m × 0.5 m). Three series of experiments were performed. The first consisted of choosing the best sand brought from three different places of the Algerian desert. The second consisted of studying the effect of the thickness of the sand layer on the daily efficacy of the collector. The influence of the sand diameter was investigated in the third series. The experimental results showed that: All collectors covered with sand had higher efficiency than those without. It was noticed that, for a fixed mass of sand (given thickness of the sand layer), the improvement of the collector was inversely proportional to the sand particle diameters. The maximum efficiency approximates 62.1% for a particle diameter 0.063 mm, compared to 41.71% for a diameter 0.250 mm.The efficiency of the collector for a fixed particle diameter increases with the increase in the thickness of the sand layer. The collector with thickness sand layer 0.84 mm gave the best efficiency of 46.14% compared to 27.8% for 0.28 mm of thickness sand layer.