富营养化水体的营养盐限制性研究综述

水体富营养化是全球目前以及今后相当一段时期内的重大水环境问题。氮、磷作为浮游植物生长所必需的营养盐,是水体富营养化的主要限制因子。通过对近年来水体富营养化受氮、磷营养盐限制的研究进行综述,研究了营养盐来源及其对浮游植物生长的影响,总结了营养盐限制性差异的影响因素,分析了缓解富营养化的营养盐主控因子。分析表明:营养盐的来源主要分为外源和内源,受外界环境及人类活动影响显著;浮游植物的生长受N/P比值及其绝对浓度的共同作用;在不同的水文、气候和人类活动强度下,水体富营养化主要营养盐限制因子存在差异,并且存在限制性转换和共同限制的情况;缓解水体富营养化措施的提出应在综合考虑多种因素的前提下进行。     

地下水-土系统中PAHs复合污染吸附/解吸机理研究进展

地下水-土系统中多环芳烃类(Polycyclic Aromatic Hydrocarbons,PAHs)污染是目前研究的热点问题之一,研究焦点正逐步由单一污染向复合污染转变,而在地下水-土系统中PAHs复合污染的吸附/解吸机理是其调查与修复研究的关键问题。结合目前国内外研究进展,对重金属、非金属类物质与PAHs复合污染时竞争性吸附/解吸机理、热力学特征和影响因素等方面的研究进行评述,认为今后的研究方向是PAHs与复合污染物间交互作用的定量分析,分子水平竞争性吸附/解吸机理研究,生物吸附、化学吸附与PAHs生物毒性影响关系研究等方面,随着上述工作的逐渐深入,必将推进地下水-土系统中复合污染的研究进程。     

Cf/SiC 复合材料表面 HfO2涂层的制备及其抗热冲击性能研究

目的研究等离子喷涂条件下Cf/SiC复合材料表面HfO_2涂层的物相、显微组织及其抗热冲击性能。方法通过水热合成和喷雾造粒制备出HfO_2粉体,并利用等离子喷涂在Cf/SiC复合材料表面制备HfO_2涂层,研究涂层的物相、显微组织和抗热冲击性能。结果水热合成的纳米HfO_2为单斜相结构,颗粒的平均粒径为10~15nm;等离子喷涂制备的HfO_2涂层组织中存在微裂纹和孔隙,涂层为单斜相结构,且经1350℃热处理后涂层的相结构未发生改变。等离子喷涂的HfO_2涂层与Cf/SiC复合材料基体结合良好,未观察到涂层、基体间界面分离的现象。经1350℃、50周次的空冷热冲击试验后,涂层未发生破坏失效;在1350℃水冷热冲击条件下,热循环20次时涂层表面出现剥落,27次时脱落面积50%。结论通过等离子喷涂制备的HfO_2涂层与Cf/SiC复合材料基体结合良好,涂层能够抵御1350℃空冷、50周次热冲击,且未发生破坏失效,涂层的1350℃水冷热循环寿命达27次。     

Pd/Al2O3粒子电极电催化还原BrO3-的研究

针对常规方法难以去除水中Br_3~-的问题,采用浸渍煅烧法制备了负载型纳米Pd/Al_2O_3粒子电极,研究了该电极电催化还原Br O-3的效果.催化剂的结构表征表明该反应实现了Pd纳米晶的均匀负载,纳米Pd/Al_2O_3具有较高的电催化活性和较低的能耗,其最佳反应条件为3%Pd负载量,0.9 m A·cm-2电流密度和1 g·L催化剂投量,酸性条件可促进Br O-3的直接或间接还原.ESR检测证实了Pd的负载增强了反应体系活性物种[H]的生成,进而促进了Br O-3的间接电催化还原.     

柴油/甲醇二元燃料发动机的非常规排放特性研究

在一台电控单体泵增压中冷柴油机上,利用FTIR研究柴油/甲醇二元燃料发动机不同甲醇替代率下的非常规排放特性.结果表明,柴油/甲醇二元燃料燃烧模式下的非常规排放物甲醛、未燃甲醇、1,3-丁二烯及N_2O的比排放与纯柴油模式相比均有不同程度的增加,且均随着甲醇替代率的增加而增加;甲醛、未燃甲醇及N_2O的比排放随着负荷的增加逐渐降低;随着转速的增加,未燃甲醇的比排放趋势相差不大,排放量也无明显差别;CO_2的比排放随着甲醇替代率的增加而下降.     

Layered sphere-shaped TiO2 capped with gold nanoparticles on structural defects and their catalysis of formaldehyde oxidation

We describe here a one-step method for the synthesis of Au/TiO₂ nanosphere materials, which were formed by layered deposition of multiple anatase TiO₂ nanosheets. The Au nanoparticles were stabilized by structural defects in each TiO₂ nanosheet, including crystal steps and edges, thereby fixing the Au–TiO₂ perimeter interface. Reactant transfer occurred along the gaps between these TiO₂ nanosheet layers and in contact with catalytically active sites at the Au–TiO₂ interface. The doped Au induced the formation of oxygen vacancies in the Au–TiO₂ interface. Such vacancies are essential for generating active oxygen species (*O⁻) on the TiO₂ surface and Ti^3 + ions in bulk TiO₂. These ions can then form Ti^3 +–O⁻–Ti^4 + species, which are known to enhance the catalytic activity of formaldehyde (HCHO) oxidation. These studies on structural and oxygen vacancy defects in Au/TiO₂ samples provide a theoretical foundation for the catalytic mechanism of HCHO oxidation on oxide-supported Au materials.     

Regeneration of commercial selective catalyst reduction catalysts deactivated by Pb and other inorganic elements

The regeneration of commercial SCR(Selective Catalyst Reduction) catalysts deactivated by Pb and other elements was studied.The deactivated catalyst samples were prepared by chemical impregnation with mixed solution containing K_2SO_4,Na_2SO_4,CaSO_4,Pb(NO_3)_2and NH_4H_2PO_4.A novel method combining Ethylenediaminetetraacetic acid disodium salt(EDTA-2Na) and H_2SO_4solution(viz.catalysts treated by dilute EDTA-2Na and H_2SO_4 solution in sequence) was used to recover the activity of deactivated samples,and the effect was compared with single H_2SO_4,oxalic acid,acetic acid,EDTA or HNO_3 solutions.The surface structure,acidity and reducibility of samples were characterized by N_2adsorption–desorption,inductively coupled plasma optical emission spectrometer(ICP-OES),scanning electron microscopy(SEM),X-ray diffraction(XRD),X-ray fluorescence(XRF),H-2-temperature programmed section(H_2-TPR),NH3-temperature programmed desorption(NH3-TPD) and in situ DRIFTS.Impurities caused a decrease of specific surface area and surface reducibility,as well as Br?nsted acid sites,and therefore led to severe deactivation of the SCR catalyst.The use of an acid solution alone possibly eliminated the impurities on the deactivated catalyst to some extent,and also increased the specific surface area and Br?nsted acid sites and promoted the surface reducibility,thus recovered the activity partially.The combination of EDTA-2Na and H_2SO_4 could remove most of the impurities and improve the activity significantly.The removal of Pb should be an important factor for regeneration.Due to a high removal rate for Pb and other impurities,the combination of EDTA-2Na and H_2SO_4 solutions provided the best efficiency.     

A~2/O-MBR工艺在农村生活污水处理中的示范

A2/O-MBR工艺因其稳定的出水水质和良好的脱氮除磷效果,在我国城镇早已得到规模化应用。但在农村由于受各种条件制约,使该工艺的应用受到限制。通过A2/O-MBR工艺在四川农村地区散户的小规模示范,分析了其在污染物去除、建设、运行维护等方面的特点以及需注意的问题,为该技术在农村地区的推广应用做出积极的探索。     

PTFE/TiO_2复合膜光催化降解水中罗丹明B研究

以P25 TiO_2为催化剂、聚四氟乙烯乳液(PTFE)为粘结剂,采用辊压法制备了PTFE/TiO_2复合膜催化剂,并对其进行了SEM和XRD表征。结果表明:TiO_2与PTFE乳液的质量比为4:1时其表面最为平整且分布着均匀的空隙。此外,PTFE的引入并没有改变TiO_2的晶相结构与衍射峰强度。另外,随着光照时间的延长,PTFE/TiO_2复合膜催化表面·OH自由基产生量呈线性增加,且Rh B分子在553 nm处特征吸收峰强度逐渐降低。经过150 min光照后,Rh B的光催化降解率达到87%。连续重复使用14次之后,PTFE/TiO_2复合催化膜的光催化效率仅下降2%左右,这表明其可能在废水深度处理领域得到实用化应用。     

SBBR工艺外加碳源乙酸钠脱氮效果的实验研究

试验选取乙酸钠为外加碳源,采用SBBR工艺处理低C/N比城市生活污水。当外加碳源后的C/N比值增加至7.0左右时,对原水NH_4~+-N去除率最高为89.31%,外加碳源后的C/N为7.12时,TN的去除率最好,去除率为71.27%。结果表明,外加乙酸钠碳源后的SBBR工艺对于低C/N生活污水脱氮性能良好。出水水质指标均达到了《城镇污水处理厂污染物排放标准》(GB18918—2002)中的"一级标准A标准",出水可作为回用水。