青岛市连续天气过程中不同气溶胶浓度特征对比分析

利用青岛市沙尘暴监测站GRIMM180颗粒物监测仪采集到的质量浓度和数浓度数据,结合2008年5月27～28日天气系统演变进行气溶胶定性分类,对海雾气溶胶、清洁气溶胶、浮尘气溶胶的浓度进行对比分析.结果表明,①清洁气溶胶、海雾气溶胶、浮尘气溶胶的总质量浓度有明显差异;②海雾气溶胶以1～2.5μm粒子的滞留最明显,清洁气溶胶中1μm的粒子贡献率最大,浮尘气溶胶则以2.5～10μm的颗粒物级数增加最具代表性,不同气溶胶相应大小粒子的质量浓度贡献率之比明显不同;③降水系统对0.6μm较大的粒子有明显的清除作用,对0.6μm的数浓度有增大作用;④1μm尤其是0.6μm的粒子处于天气系统前部到达潮湿空气时有特殊的活化现象;⑤不同粒径尺度的粒子数浓度随气溶胶性质的转变呈现不同的模态.     

粒度对煤矸石活化效率的影响

煤矸石煅烧活化是煤矸石为原料提取铝、硅等化工原料的重要环节,煤矸石破碎粒度对煅烧活化效率有重要影响。文章以山西潞安的煤矸石为原料,利用煅烧活化-酸溶法提取煤矸石中的铝,研究了粒度对煤矸石活化效率的影响。实验确定铝溶出的较优工艺条件为:煅烧温度650℃、20%盐酸225mL/100g煤矸石、固液比1:3、酸浸时间3h,在此工艺条件下研究矸石粒度对铝和铁溶出的影响。结果表明:物料粒度对活化效果影响显著,当物料粒度为60～80目时,铝的溶出率最大达到79%;物料与空气充分接触有利于提高活化效果,动态煅烧活化效率显著高于静态煅烧,粒度对煅烧效果产生的重要影响很大程度来源于空气接触比表面积。     

水力压裂诱发断层活化失稳概率分析

为评估非常规油气开采过程水力压裂诱发断层活化失稳风险,基于新库仑稳定函数,通过编程求解诱震概率,分析不同诱因下断层稳定性和失稳风险。结果表明:孔隙弹性剪应力、孔隙压力和差异压实共同作用,是断层活化失稳重要诱因。当孔隙弹性剪应力介于6~10 MPa时,断层失稳概率高达68.9%,其增幅率越大,诱发远区断层失稳风险越高。孔隙压力增量超过3 MPa,对于定向不良断层极为不利;断层倾角和落差越大,差异压实作用越显著。     

苯为好氧共代谢基质的1,1-二氯乙烯的生物降解研究

为更好地去除地下水中常见的混合污染物苯与1,1-二氯乙烯（1,1-DCE）,从用苯与1,1-DCE驯化的好氧共代谢活性污泥中筛选获得6株菌株,并利用16SrDNA技术鉴定菌株属性,通过研究6株菌株的降解特性获得优势菌株,并进一步探讨优势菌株的最佳生长因素.结果表明,筛选的6株菌株中,4株属于产碱杆科,另外2株属于放线菌...     

Degradation of carbon tetrachloride in thermally activated persulfate system in the presence of formic acid

The thermally activated persulfate (PS) degradation of carbon tetrachloride (CT) in the presence of formic acid (FA) was investigated. The results indicated that CT degradation followed a zero order kinetic model, and CO ₂ ^– · was responsible for the degradation of CT confirmed by radical scavenger tests. CT degradation rate increased with increasing PS or FA dosage, and the initial CT had no effect on CT degradation rate. However, the initial solution pH had effect on the degradation of CT, and the best CT degradation occurred at initial pH 6. Cl^– had a negative effect on CT degradation, and high concentration of Cl^– displayed much strong inhibition. Ten mmol·L^–1HCO ₃ ^– promoted CT degradation, while 100 mmol·L^–1NO ₃ ^– inhibited the degradation of CT, but SO ₄ ^2– promoted CT degradation in the presence of FA. The measured Cl–concentration released into solution along with CT degradation was 75.8% of the total theoretical dechlorination yield, but no chlorinated intermediates were detected. The split of C-Cl was proposed as the possible reaction pathways in CT degradation. In conclusion, this study strongly demonstrated that the thermally activated PS system in the presence of FA is a promising technique in in situ chemical oxidation (ISCO) remediation for CT contaminated site.     

珠江三角洲地区气溶胶分档活化特性与闭合实验

使用SMPS与CCNC系统相结合,于2011年12月在广州番禺大气成分站开展了40~200nm气溶胶粒子的分档活化观测.活化率曲线和统计结果显示0.109%、0.20%、0.39%、0.67%四个过饱和比下临界干粒径Dmid依次为143.7,99.5,74.7,62.6nm;对应的截断粒径Dcut为171.9, 119.1, 90.2, 72.5nm.进一步分析表明,气溶胶粒子的活化能力主要受粒径控制,成分与混合状态的影响在活化临界位置附近最为显著.本次观测结果与华北地区和周边城郊地区相比,气溶胶活化能力较弱.闭合实验计算得到的CCN数浓度与观测值存在很好的相关性(R2=0.9477),计算值较观测值高约16%.考虑到仪器系统误差等因素,认为两者闭合良好.对CCN数浓度计算中使用的3个因子,即气溶胶数浓度NCN、气溶胶谱型NSD、活化率曲线ARSR进行了敏感性实验,结果显示各因子对CCN数浓度的影响程度存在如下关系:NCN> NSD> ARSR.     

Removal of chromium(VI) by ZnCl2 activated coir pith carbon

The adsorption of chromium(VI) onto ZnCl₂ activated carbon developed from coir pith was investigated to assess the possible use of this adsorbent. The influence of contact time, adsorbent dose, Cr(VI) concentration, pH and temperature were investigated. The two theoretical adsorption isotherms, namely, Langmuir and Freundlich were used to describe the experimental results. The Langmuir adsorption capacity (Q ₀) was found to be 120.5?mg Cr(VI) per g of the adsorbent. The adsorption followed the second-order kinetics and was found to be maximum at pH 2.0. The pH effect and the desorption studies showed that ion exchange mechanism might be involved in the adsorption process. The effects of foreign ions such as chloride, sulphate, phosphate, selenite, molybdate, nitrate and perchlorate on the removal of Cr(VI) have been investigated. The removal of Cr(VI) from synthetic ground water was also tested. The results show that ZnCl₂ activated coir pith carbon is effective for the removal of Cr(VI) from water.     

KFR-2特种饰面型防火涂料的热解动力学分析

利用梅特勒TA4000,25-TC15型热分析仪对KFR-2特种饰面型防火涂料和普通乳胶漆涂料进行了TG和DSC分析,研究了KFR-2特种饰面型防火涂料和普通乳胶漆涂料的降解过程.在分析动力学理论模型基础上,分析数据,确定了KFR-2特种饰面型防火涂料和普通乳胶漆涂料的热力学参数,活化能.通过分析比较得出,与普通乳胶漆相比,KFR-2特种饰面型防火涂料由于添加了阻燃成分,使活化能显著提高,热稳定性明显加强,体系耐热性能好,阻燃效果明显.     

Enhanced catalytic oxidation of 2,4-dichlorophenol via singlet oxygen dominated peroxymonosulfate activation on CoOOH@Bi2O3 composite

• Bi₂O₃ cannot directly activate PMS. • Bi₂O₃ loading increased the specific surface area and conductivity of CoOOH. • Larger specific surface area provided more active sites for PMS activation. • Faster electron transfer rate promoted the generation of reactive oxygen species. • ¹O₂ was identified as dominant ROS in the CoOOH@Bi₂O₃/PMS system. Cobalt oxyhydroxide (CoOOH) has been turned out to be a high-efficiency catalyst for peroxymonosulfate (PMS) activation. In this study, CoOOH was loaded on bismuth oxide (Bi₂O₃) using a facile chemical precipitation process to improve its catalytic activity and stability. The result showed that the catalytic performance on the 2,4-dichlorophenol (2,4-DCP) degradation was significantly enhanced with only 11 wt% Bi₂O₃ loading. The degradation rate in the CoOOH@Bi₂O₃/PMS system (0.2011 min⁻¹) was nearly 6.0 times higher than that in the CoOOH/PMS system (0.0337 min⁻¹). Furthermore, CoOOH@Bi₂O₃ displayed better stability with less Co ions leaching (16.4% lower than CoOOH) in the PMS system. These phenomena were attributed to the Bi₂O₃ loading which significantly increased the conductivity and specific surface area of the CoOOH@Bi₂O₃ composite. Faster electron transfer facilitated the redox reaction of Co (III) / Co (II) and thus was more favorable for reactive oxygen species (ROS) generation. Meanwhile, larger specific surface area furnished more active sites for PMS activation. More importantly, there were both non-radical (¹O₂) and radicals (SO₄⁻•, O₂⁻•, and OH•) in the CoOOH@Bi₂O₃/PMS system and ¹O₂ was the dominant one. In general, this study provided a simple and practical strategy to enhance the catalytic activity and stability of cobalt oxyhydroxide in the PMS system.     

南京北郊秋季高污染大气背景下云凝结核活化特性研究

于2019年10月17日—11月16日在南京北郊地区,采用SMPS-CCNC联用的方式,对8.2~346 nm的气溶胶粒子展开了粒径分辨的CCN活化特征观测.根据PM_2.5浓度范围选取了清洁天和污染天进行分析发现,在高污染大气背景下,由于有机物浓度及占比较高,无机盐浓度较低,故CCN活化率低于清洁天.清洁天SOA组分占比较高,其大气氧化经历更长,氧化态更高,吸湿参数κ也更高;污染天在受到直接排放的影响下,大气氧化经历短,氧化态较低,POA占比相对较高,所以清洁天的吸湿参数κ大于污染天κ(0.28±0.07>0.24±0.09).清洁天的f₄₄平均值为0.14±0.02,污染天的f₄₄平均值为0.12±0.02,进一步表明清洁天的有机气溶胶氧化态更高.因此,高污染大气背景下由于大气中存在很多受排放影响的积聚模态的气溶胶,含有很多低吸湿性物质,降低了CCN的活化能力和吸湿性.