Chemical composition and physical properties of filter fly ashes from eight grate-fired biomass combustion plants

For the handling, treatment and utilization of fly ash from biomass combustion its chemical composition and physical properties are important. In this study eight filter fly ashes from different grate-fired biomass combustion plants were investigated. In fly ash from straw combustion high concentrations of(K) were found, whereas in the fly ash from wood combustion the concentrations of Ca and Mg were higher. The average concentration of PO3-4was similar in both types of fly ashes. In all wood fly ashes some measured heavy metal concentrations were above the limits for utilization. The straw fly ashes were much less contaminated and can be utilized. For wood fly ash most parameters showed little variation, except from one fly ash where the dust pre-separator is in poor condition. The average values were: mass median diameter 4.3 ± 0.8 μm, spread of particle size distribution19 ± 11, particle density 2620 ± 80 kg/m3 and angle of repose 50°± 1°. The density of the straw fly ashes is lower(2260 ± 80 kg/m3) and the spread of the size distribution is higher(72 ± 24).For one straw combustion fly ash the values of the mass median diameter and the angle of repose were similar to the values of wood combustion fly ash, for the other straw fly ash the values differed considerably. While the particle size of this fly ash was much smaller,surprisingly the angle of repose was also lower. This can be attributed to the formation of small agglomerates in this fly ash, which were not disintegrated without a certain stress.     

Multiple regression models for the lower heating value of municipal solid waste in Taiwan

A multiple regression analysis was used to develop two predictive models of lower heating value (LHV) for municipal solid waste (MSW), using 180 samples gathered from cities and counties in Taiwan during 2001-2002. These models are referred to as the original proposed model (OPM) and the simplified model (SM). The coefficients of multiple determinations for the OPM and SM were 0.983 and 0.975, respectively. To verify the feasibility of the models, a demonstration program based on sampling of MSW in Kaohsiung City was conducted. As a result, the OPM showed superior precision in terms of relative percentage deviation (RPD) and mean absolute percentage error (MAPE), when compared to the conventional models based on the proximate analysis, physical composition and ultimate analysis. The SM was derived by neglecting the three minor physical components used in the OPM. The resulting SM was less precise when compared to the OPM, but it was still acceptable, with a precision level better than the conventional models. It was concluded that the predictability of empirical models could be improved significantly through selection of the appropriate physical components and multiple regression analysis.     

石油野外作业工人体力劳动强度分级调查

据ＧＢ３８６９—８３标准对江汉油田测量、地震、钻井、井下四类野外作业３４名工人、２４个工种进行了体力劳动强度分级调查，其结果：测量作业为Ⅰ～Ⅱ级；钻井作业Ⅱ级占５／８，Ⅲ级占１／４；井下作业Ⅲ级占２／３；地震作业Ⅲ、Ⅳ级各占４／９、２／９。说明前两类基本属中等强度劳动，后两类大部分属重强度劳动。     

Theory of the physical environment: An introduction

This paper suggests a way of classifying human physical environment according to its location and function. Environmental science is viewed as a branch of ecology, and the concept of the complex ecosystem is introduced. By using differential equations, the author draws attention to four factors that must be considered when evaluating the effect of any environmental agent on a human subject: the agent's extensive quality of rate of flow, its intensive quality of concentration or intensity, duration of the subject's exposure, and the uniformity of agent's stress in space and time. The environmental agents, individually or in jointly acting groups, produce environmental stress, which acts on the subject to produce strain and its contingent symptoms. The microclimate in this setting can be classified according to the type of stress involved. The human physical environment may be evaluated in three ways: objectively, subjectively, and from the standpoint of regulations or standards. The benefit or advantage of using this equation in evaluating or measuring the human physical environment is discussed.     

Single- and dual-porosity modelling of flow in reclaimed mine soil cores with embedded lignitic fragments

Lignitic mine soils represent a typical two-scale dual-porosity medium consisting of a technogenic mixture of overburden sediments that include lignitic components as dust and as porous fragments embedded within a mostly coarse-textured matrix. Flow and transport processes in such soils are not sufficiently understood to predict the course of soil reclamation or of mine drainage. The objective of this contribution is to identify the most appropriate conceptual model for describing small-scale heterogeneity effects on flow on the basis of the physical structure of the system. Multistep flow experiments on soil cores are analyzed using either mobile–immobile or mobile–mobile type 1D dual-porosity models, and a 3D numerical model that considers a local-scale distribution of fragments. Simulations are compared with time series' of upward infiltration and matric potential heads measured at two depths using miniature tensiometers. The 3D and the 1D dual-permeability models yielded comparable results as long as pressure heads are in local equilibrium; however, could describe either the upward infiltration or the matric potential curves but not both at the same time. The mobile–immobile type dual-porosity model failed to describe the data. A simultaneous match with pressure heads and upward infiltration data could only be obtained with the 1D dual-permeability model (i.e., mobile–mobile) by assuming an additional restriction of the inter-domain water transfer. These results indicate that for unsaturated flow conditions at higher matric potential heads (i.e., here >− 40 hPa), water in a restricted part of the fragment domain must be more mobile as compared to water in the sandy matrix domain. Closer inspections of the pore system and first neutron radiographic imaging support the hypothesis that a more continuous pore region exists at these pressure heads in the vicinity of the lignitic fragments possibly formed by fragment contacts and a lignitic dust interface-region between the two domains. The results suggest that the small-scale structure is too complex as to be represented by weighted contributions of individual components alone.     

Properties of Distillers Grains Composites: A Preliminary Investigation

Interest in renewable biofuel sources has intensified in recent years, leading to greatly increased production of ethanol and its primary coproduct, Distillers Dried Grain with Solubles (DDGS). Consequently, the development of new outlets for DDGS has become crucial to maintaining the economic viability of the industry. In light of these developments, this preliminary study aimed to determine the suitability of DDGS for use as a biofiller in low-cost composites that could be produced by rapid prototyping applications. The effects of DDGS content, particle size, curing temperature, and compression on resulting properties, such as flexural strength, modulus of elasticity, water activity, and color were evaluated for two adhesive bases. The composites formed with phenolic resin glue were found to be greatly superior to glue in terms of mechanical strength and durability: resin-based composites had maximum fiber stresses of 150–380 kPa, while glue composites had values between 6 kPa and 35 kPa; additionally, glue composites experienced relatively rapid microbial growth. In the resin composites, both decreased particle size and increased compression resulted in increased mechanical strength, while a moderate DDGS content was found to increase flexural strength but decrease Young’s modulus. These results indicate that DDGS has the potential to be used in resin glue-based composites to both improve flexural strength and improve potential biodegradability.     

Is there a place for social capital in the psychology of health and place?

The field of environmental psychology is primely placed to further understanding of the way in which social capital influences or is influenced by the context and characteristics of neighbourhood environments, but has been one of the quieter voices in the cacophony of social capital discourse over the last decade. While there is increasing research interest in area and neighbourhood variations in social capital, the mechanisms and causal pathways through which physical environments, social capital and health may be related are not yet clear. More refined unpacking of the relationship between social capital and neighbourhood design, features and settings is required to identify practical intervention points for preserving, fostering and harnessing social capital within communities. Through a review of literature, this paper explores whether there is a place for social capital in the psychology of place and considers the contribution that environmental psychology and related disciplines could make to future social capital research and applications.     

Spray optimization through application and liquid physical property variables–I

One of the most important considerations when optimizing a spray application for maximum efficacy and minimum drift is the selection of the optimum droplet size spectrum (Hewitt, A. J., 1997. The importance of droplet size in agricultural spraying. Atomization and Sprays, 7(3), 235–244). Applicators are faced with an extensive selection of nozzle types, tank mixes and adjuvants. The present paper discusses the way that the tank mix and application variables interact to produce specific spray characteristics of droplet size spectrum, coverage and performance in total spray efficiency. Experimental data investigating the effects of liquid physical properties such as dynamic surface tension, shear and extensional viscosity are described. Spray formation from emulsions, surfactants and oils is also discussed. Atomization studies conducted in wind tunnels using a wide range of atomizer and nozzle types under different operating conditions are discussed. Empirical models for predicting atomization and drift of sprays are described with emphasis on their development and practical use for spray optimization.     

Assessment of outdoor school environments and physical activity in Ankara's primary schools

Outdoor school environments are sites for play and physical activity for many children, and shortcomings within these environments are considered significant factors that contribute to children's inactive lifestyles and high levels of childhood obesity. This study explores the associations between the physical characteristics of schoolyards and the physical activity of third and fourth year students in five Turkish primary schools. Data were collected through multiple methods, including behavior mapping of student activities during recess, physical assessments of schoolyards, and interviews with students, teachers and administrations. The findings show similarities in the landscape features and physical qualities of schoolyards, particularly in the types of play and activities in which students engage. Results indicated that active students who walk to and from schools have lower body mass index (BMI) values than passive students, and students in schools with larger yards have lower BMI values. Most of the students prefer spacious and vegetated yards. A major concern is the crowdedness of the yards during recess that limit children's activity. Schoolyards with advanced landscape features are preferred more, and this in turn affects students’ positive satisfaction. Outdoor school environments have a correlation to health outcomes and should be designed to promote more activity. Improving the physical and landscape qualities of the public schoolyards should be the primary concern of the designers in order to increase awareness of natural environment and more important, increase the health of children.     

对化学品登记要求的数据解释：—理化参数和生物降解

本文对化学品登记时所要求的理化和生物降解数据做了解释。涉及到的测试参数包括:紫外—可见光谱、熔点、沸点,蒸汽压曲线、水溶解度、吸附—解吸、分配系数(正丁醇—水)、液体和固体密度、颗粒物粒度分布、与 pH 有关的水解作用、在水中的离解常数和快速生物降解。