The effect of olive mill wastewater on seed germination after various pretreatment techniques

Olive mill wastewater (OMW) management has been a major issue of environmental concern for olive oil producing countries. OMW can be a serious nuisance, when disposed of untreated, due to its significantly high organic load, its phytotoxic properties and its relatively low biodegradability. Field and plant irrigation with raw or pretreated OMW is an easy and relatively inexpensive method to treat and dispose of OMW. Typical pretreatment techniques could be comprised of phase separation through a settling basin, dilution with water, aeration to promote biological degradation and pH neutralization. A full factorial experimental design approach was used here to study the main effects and interactions of the above four pretreatment techniques on the germination of tomato and chicory seeds. Results of the study showed that the most statistically significant technique affecting OMW phytotoxicity is water dilution. The next most significant technique was aeration. In particular, phytotoxicity decreased with increased OMW dilution with water, when OMW was aerated and without pH adjustment. pH neutralization resulted in increased phytotoxicity. Settling did not significantly decrease the phytotoxicity of settled OMW and is therefore not considered necessary in an OMW management system in which plant irrigation is the goal. The interaction of aeration and pH was, marginally, the most significant two-way interaction for tomato seeds, while no interactions were significant when chicory seeds were used.     

The toxicity of composted sediments from Mediterranean ports evaluated by several bioassays

This work investigates the ecotoxicological evaluation of contaminated dredged sediments from French Mediterranean navy harbour (A), commercial port (B) and two composite specimens (C) and (D) coming from the mixture of A and B with other port sediments. The toxicity of elutriates from these sediments is estimated using embryo-toxicity test, Microtox® solid phase test, LuminoTox, phytotoxicity tests and genotoxicity test. Bioassay responses are not clearly correlated with chemical contamination in the whole sediment and vary as a function of tested organisms. The highest contaminated samples (A and C) are almost always more toxic than the less contaminated samples (B and D). Among composite sediments, the mixture effect with other sediments is not efficient to decrease toxicity in sample C, suggesting that other parameters influence toxicity level such as particle size or organic matter content. These parameters should be taken into consideration in order to improve the efficiency of the mixture process and produce composite sediments with low toxicity.     

The toxicity of phthalocyanines to the aquatic plant Lemna minor (duckweed) - testing of 31 compounds

Phthalocyanines are prospective chemicals that have applications in industry, medicine and biology due especially to their architectural flexibility and production of reactive oxygen species. Although they are used in so many areas of human activities nowadays, there is still little knowledge of their ecotoxicity. Here we present the first observation of their toxic effects on representatives of the aquatic plants Lemna minor. The tested phthalocyanines possess a wide spectrum of phytotoxicity ranging from seldom (>50 mg L⁻¹) to highly toxic 0.11 mg L⁻¹. Moreover, the potential of phthalocyanines to be used as selective cyanocides or herbicides is discussed as well.     

A prototype of proposed treatment plant for sago factory effluent

Sago processing industries discharge wastewater, which poses a threat to water bodies due to their higher organic loading. Concerns about pollution related problems in the global scenario are persuading all the processing industries to adopt cleaner manufacturing practices. Hence, this study was aimed at developing a cost-effective and eco-friendly treatment plant based on microbial system to treat the sago factory effluent effectively in order to reuse the water for industrial purposes. The experimental results showed that, anaerobic treatment with mixed inoculum for 10 days followed by 6 days of fungal treatment was found to be effective in effluent treatment. The fusant showed a higher efficiency in the treatment of sago factory effluent than the parental strains.     

Habitat function of agricultural soils as affected by heavy metals and polycyclic aromatic hydrocarbons contamination

Ecotoxic activity of soils polluted with polycyclic aromatic hydrocarbon (PAH) and heavy metals (HM) was evaluated in pot and laboratory experiments. Plants and soil microorganisms were chosen as test organisms and six different soil materials were used in the study. The applied levels of HM and PAH were aimed to reflect environmental conditions in the "worst case" situation. Zn(2+), Pb(2+) and Cd(2+) were introduced to the soils as an aqueous solution of the mixture of salts at the concentrations corresponding to 1000, 500 and 3 mg kg(-1), respectively. Mixture of four PAH compounds (flourene, anthracene, pyrene and chrysene) as a CH(2)Cl(2) solution was applied at levels of 10-100 mg summation operator 4PAH kg(-1). Population and activity of soil microflora was evaluated as measured of total bacteria counts, intensity of respiration and enzyme activity (dehydrogenases and phosphatases). Effect on plants was evaluated on the base of the growth (plant at an early stage of their development) and yield (mature plant) measurements. The results indicate that combined effect of PAH and heavy metals on soil microorganisms activity and on some plants at an early stage of their development can be stronger than in soils amended with HM or PAH separately. Reaction of tested organisms was related to soil properties, PAH concentration, time and plant species. Mature plants (maize) were insensitive to the applied levels of both group of contaminants.     

Models for the field-based toxicity of copper and zinc salts to wheat in 11 Australian soils and comparison to laboratory-based models

Laboratory-based relationships that model the phytotoxicity of metals using soil properties have been developed. This paper presents the first field-based phytotoxicity relationships. Wheat (Triticum aestivum L.) was grown at 11 Australian field sites at which soil was spiked with copper (Cu) and zinc (Zn) salts. Toxicity was measured as inhibition of plant growth at 8 weeks and grain yield at harvest. The added Cu and Zn EC10 values for both endpoints ranged from approximately 3 to 4760 mg/kg. There were no relationships between field-based 8-week biomass and grain yield toxicity values for either metal. Cu toxicity was best modelled using pH and organic carbon content while Zn toxicity was best modelled using pH and the cation exchange capacity. The best relationships estimated toxicity within a factor of two of measured values. Laboratory-based phytotoxicity relationships could not accurately predict field-based phytotoxicity responses.     

Toxicity attenuation of olive mill wastewater in soil slurries

Olive mill wastewaters are toxic for plants and microbes due to their high polyphenol content. We studied the effect of agricultural soil as a natural catalyst to promote polyphenol oxidation and polymerization, and in turn detoxify olive mill wastewaters. We show that model polyphenols are fully converted in soil slurries. Their products show no toxicity to the growth of a typical soil bacterium, Bacillus cereus, and reduced phytotoxicity in germination tests with English cress seeds. Those findings are promising for the sustainable treatment of olive wastewater in aerated soil slurries.     

Effects of persulfate-assisted hydrothermal treatment of municipal sludge on aqueous phase characteristics and phytotoxicity

Hydrothermal technology (HT) has received much attention in recent years as a process to convert wet organic waste into hydrochar.The aqueous phase (HTAP) produced by this process is still a burden and has become a bottleneck issue for HT process development.In this study,we provide the?rst investigation of the HTAP characteristics,phytotoxicity,and their correlation with persulfate (PS)(PS,2.0 mmol/g TS)-assisted municipal sludge HT.The results showed that PS accelerated the hydrolysis of prote...     

Chelating agent-assisted electrokinetic removal of cadmium, lead and copper from contaminated soils

An integrated experimental program was conducted to remove Cd, Pb and Cu from contaminated soil. The chelate agents nitrilotriacetic acid (NTA), diethylenetriamine pentaacetic acid (DTPA) and ethyleneglycol tetraacetic acid (EGTA) were used as washing solutions under different pH conditions and concentrations. Results showed that the extraction efficiency for Cd in decreasing order was NTA > EGTA > DTPA, while for Pb and Cu it was DTPA > NTA > EGTA. The use of higher chelate concentrations did not necessarily result in greater extraction efficiency. Electrokinetic remediation was applied by conditioning anolyte-catholyte pH to neutral values in order to avoid any potential alterations to the physicochemical soil properties. The removal efficiency for Cd was 65-95%, for Cu 15-60%, but for Pb was less than 20%. The phytotoxicity of the treated soil showed that the soil samples from the anode section were less phytotoxic than the untreated soil, but the phytotoxicity was increased in the samples from the cathode section.     

Mercury bioaccumulation and phytotoxicity in two wild plant species of Almadén area

Mercury is a widely distributed environmental pollutant, able to induce toxicity in living organisms, including higher plants. Some plant species are able to grow in mine sites, like the Almadén zone in Spain. Our study focus on two of these plant species, Rumex induratus and Marrubium vulgare and their responses to natural Hg exposure. Total Hg concentration in the soil below the plants could be classified as toxic, although the available fraction was low. Hg availability was higher for the M. vulgare than for the R. induratus plot. Hg concentrations in field plants of R. induratus and M. vulgare grown on these soils can be considered as phytotoxic, although no symptoms of Hg toxicity were observed in any of them. According to the BAF ([Hg]_tissue/[Hg]_avail), R. induratus showed a higher ability in Hg uptake and translocation to shoots, as well as higher concentrations of MDA and –SH:Hg ratios, so that this plant is more sensitive to Hg than M. vulgare. The resistance to Hg and the capability to extract Hg from the soil make both M. vulgare and R. induratus good candidates for Hg phytoremediation of contaminated soils.