A bayesian network-based safety assessment method for solid propellant granule-casting molding process

The safety of the solid propellant molding process is vital for the stable production of high-quality propellants. Failure events caused by abnormal parameters in the molding process may have catastrophic consequences. In this paper, a Bayesian network (BN) model is proposed to assess the safety of the solid propellant granule-casting molding process. Fault tree analysis (FTA) is developed to construct a causal link between process variables and process failures. Subsequently, expert experience and fuzzy set theory (FST) are used to obtain failure probabilities of the basic events (BEs). Based on the mapping rules, FTA provides BN with reliable prior knowledge and a network structure with interpretability. Finally, when new evidence is obtained, the probability is updated with the diagnostic reasoning capability of BN. The results of the sensitivity analysis and diagnostic inference were combined to identify key parameters in the granule-casting molding process, including curing temperature, vacuum degree, extrusion, calendering roll distance, length setting value, holding time, and polish time. The results of this paper can provide effective supporting information for managers to conduct process safety analysis.     

SPE-UPLC-MS/MS法测定地下水中多种农药残留

采用固相萃取超高效液相色谱串联质谱法(SPE-UPLC-MS/MS)同时测定地下水中涕灭威、克百威、2,4滴和五氯酚等4种农药残留,通过优化试验条件,使方法在10.0μg/L～200μg/L范围内线性良好,检出限为0.003μg/L～0.006μg/L.标准溶液低、中2个质量浓度水平的加标回收率为84.1％ ～98.8...     

Some properties of a sequencing batch reactor for treatment of wastewater containing thiocyanate compounds

Thiocyanate (SCN) compounds in photo-processing wastewater (PPWW) could be treated by an SBR system without any release of thiocyanate to the atmosphere during the aeration step. An SCN loading greater than 84 g m(-3)d(-1) showed negative effects on the growth of bio-sludge and removal efficiencies of the system. The acclimatization period of the system was increased with an increase in SCN concentration or loading. The COD, BOD(5), TKN, and SCN removal efficiencies were 96.0 +/- 1.6%, 72 +/- 2%, 49 +/- 5%, and 82 +/- 3%, respectively, under an SCN loading of up to 84 g m(-3)d(-1). The removal efficiency of the system was repressed by SCN due to the repressed growth rate of nitrification bacteria. However, the removal efficiency could be increased with an increase in HRT or a decrease in SCN loading. Also, increases in HRT or decreases in SCN loading led to increased sludge age or solid retention time (SRT) and decreased the sludge volume index (SVI) value. The SRT and SVI of the system with synthetic wastewater containing 840 mg l(-1) SCN under an HRT of 3 days (SCN loading of 280 g m(-3)d(-1)) were 3.9 +/- 0.7 days and 65 +/- 4 ml g(-1), respectively, while they were 11.2+/-0.8 days and 55 +/- 6 ml g(-1), respectively under an HRT of 10 days (SCN loading of 84 g m(-3)d(-1)).     

Regionalization of Municipal Solid Waste Management in Japan: Balancing the Proximity Principle with Economic Efficiency

The proximity principle—disposing of waste close to its origin—has been a central value in municipal solid waste (MSW) management in Japan for the last 30 years and its widespread adoption has helped resolve numerous “Not in My Backyard” issues related to MSW management. However, MSW management costs have soared, in large part because of aggressive recycling efforts and because most MSW is incinerated in a country that has scarce landfill capacity. In addition, smaller, less sophisticated incinerators have been closed because of high dioxin emissions. Rising costs combined with the closure of smaller incinerators have shifted MSW management policy toward regionalization, which is the sharing of waste management facilities across municipalities. Despite the increased use of regionalized MSW facilities, the proximity principle remains the central value in Japanese MSW management. Municipal solid waste management has become increasingly regionalized in the United States, too, but different driving forces are at work in these two countries. The transition to regionalized MSW management in Japan results from strong governmental control at all levels, with the central government providing funds and policy direction and prefectures and municipalities being the primary implementing authorities. By contrast, market forces are a much stronger force with US MSW management, where local governments—with state government oversight—have primary responsibility for MSW management. We describe recent changes in Japan’s MSW programs. We examine the connections between MSW facility regionalization, on the one hand, and, on the other hand, the proximity principle, coordination among local governments, central government control, and financing mechanisms.     

Environmental impacts of residual Municipal Solid Waste incineration: A comparison of 110 French incinerators using a life cycle approach

Incineration is the main option for residual Municipal Solid Waste treatment in France. This study compares the environmental performances of 110 French incinerators (i.e. 85% of the total number of plants currently in activity in France) in a Life Cycle Assessment perspective, considering 5 non-toxic impact categories: climate change, photochemical oxidant formation, particulate matter formation, terrestrial acidification and marine eutrophication. Mean, median and lower/upper impact potentials are determined considering the incineration of 1 tonne of French residual Municipal Solid Waste. The results highlight the relatively large variability of the impact potentials as a function of the plant technical performances. In particular, the climate change impact potential of the incineration of 1 tonne of waste ranges from a benefit of ?58 kg CO₂-eq to a relatively large burden of 408 kg CO₂-eq, with 294 kg CO₂-eq as the average impact. Two main plant-specific parameters drive the impact potentials regarding the 5 non-toxic impact categories under study: the energy recovery and delivery rate and the NO_x process-specific emissions. The variability of the impact potentials as a function of incinerator characteristics therefore calls for the use of site-specific data when required by the LCA goal and scope definition phase, in particular when the study focuses on a specific incinerator or on a local waste management plan, and when these data are available.     

Ecophysiological constraints associated with aggression,and evolution toward pacifism in Spalax ehrenbergi

Evolution from a solitary way of life to sociality involves changes in the modalities of within-population aggression. This paper is concerned with environmental causes of variation in aggression within the complex of mole-rat species Spalax ehrenbergi. We focus on physiological constraints associated with aggressive behaviour, i.e. those resulting from emotional arousal and thus stress. Aggression, social stress sensitivity and urine osmolarity were studied in males of two chromosomal species of Spalax ehrenbergi, 2n = 52 (occurring in cool humid areas) and 2n = 60 (occurring in warm arid zones). Males with 2n = 52 reached a higher level of within-population aggression during a 3-round tournament (an average, 488 ± 140 acts) than males with 2n = 60 (163 ± 54 acts). The species with 2n = 52 displayed a higher corticosterone response after a social encounter (in average, 5.15 ± 0.54 μg/100 ml) than that with 2n = 60 (3.0 ± 0.3 μg/100 ml) whereas resting levels of this hormone were low and not different between the two species. Urine osmolarity was significantly higher in males with 2n = 60 (331.9 ± 18.6 mmol/kg) than males with 2n = 52 (267.3 ± 10.9 mmol/kg). Considering the overall general trend urine osmolarity tended to be negatively related to the level of aggression, while corticosterone levels tended to vary positively with aggressiveness (Fig. 3). Our results allow further discussion of the hypothesis that high levels of aggression could be selected against in arid habitats due to their physiological correlates (decrease in water economy, increased corticosterone leading to potential energy mobilisation and loss). We propose that behavioural ecophysiology could have contributed to the radiation of the S. ehrenbergi superspecies into increasingly arid environments, and may favour evolution toward social tolerance. Received: 10 June 1995/Accepted after revision: 25 October 1995     

Study of metabolites from the degradation of polycyclic aromatic hydrocarbons (PAHs) by bacterial consortium enriched from mangrove sediments

The PAH metabolites produced during degradation of fluorene, phenanthrene and pyrene by a bacterial consortium enriched from mangrove sediments were analyzed using the on-fiber silylation solid-phase microextraction (SPME) combining with gas chromatography–mass spectrometry (GC–MS) method. Seventeen metabolites at trace levels were identified in different PAH degradation cultures based on the full scan mass spectra. In fluorene degradation cultures, 1-, 2-, 3- and 9-hydroxyfluorene, fluorenone, and phthalic acid were detected. In phenanthrene and pyrene degradation cultures, various common metabolites such as phenanthrene and pyrene dihydrodiols, mono-hydroxy phenanthrene, dihydroxy pyrene, lactone and 4-hydroxyphenanthrene, methyl ester, and phthalic acid were found. The detection of various common and novel metabolites demonstrates that SPME combining with GC–MS is a quick and convenient method for identification as well as monitoring the real time changes of metabolite concentrations throughout the degradation processes. The knowledge of PAH metabolic pathways and kinetics within indigenous bacterial consortium enriched from mangrove sediments contributes to enhance the bioremediation efficiency of PAH in real environment.     

试论推行特种设备事故责任强制保险的必要性

随着经济和社会的飞速发展,我国特种设备安全形势严峻,社会影响恶劣。我国现有特种设备责任保险,阻碍了责任保险功能的实现。本文在全面阐释特种设备事故责任强制保险基本问题的基础上提出,特种设备事故责任强制保险,具有转移特种设备相关单位的责任风险,及时、有效地使受害者获得赔付,预防事故的发生,维护社会稳定的作用,应当成为以市场化手段辅助特种设备安全监管的有效途径。     

长管拖车的风险预防

本文以HGJ9550GGQ型长管拖车为例,~RETSGP,,0005-2012《移动式压力容器安全技术监察规程》的要求对产品进行风险评估,旨在为使用者制定El常操作规程和事故发生时的紧急预案提供参考。使设备在全部寿命期内处于恰当的操作、维护及管理之下,确保设备使用者及相关方的利益和人身安全。     

Effect of admixture of solid inertant on fire hazard of dust layers oriented at varying degrees of inclination

Unlike metallic dust layers, the layer flammability levels (LFL) of non-metallic dust layers exhibit a wide range from Class 1 (No self-sustained combustion) to Class 6 (explosive combustion). However, determinations of layer flammability have not considered the effect of inclination angle, thereby potentially underestimating fire hazard of combustible dust layers in many industrial situations. In this research, inclined dust layers showed greater fire hazard than did horizontally oriented dust layers. For example, LFL of wood dust jumped from class 3 to class 5 when layers were positioned with an incline. Flame spread rate of PMMA dust layers increased from 1.8 to 3.6 mm/s when the angle of inclination increased from 0 to 40°. Even small amounts of solid inertant significantly decreased surface layer fires. The required amount of inertant to completely inert layer fires was far less than that for smoldering layer fires or dust explosions.