焦作矿区煤矸石山周围土壤和玉米作物重金属污染研究

以焦作演马矿区为例,研究煤矸石长期堆放对周围土壤和玉米作物造成的重金属污染。根据当地地形地貌在矸石堆周围呈放射状布设3条采样线,用HCl-HNO3-HF—HClO4全分解法和HNO3-HClO4湿法消解土壤和玉米样品,检测土壤和玉米（叶、茎和籽）中主要有害重金属元素（Pb、Cu、Cr、Zn）。研究表明：土壤和玉米中Pb和Zn含量超标,且距离矸石堆由近及远土壤和玉米作物中重金属含量呈下降趋势,重金属在玉米作物不同部位的富集能力表现为叶中最高,茎次之,籽最低。     

废塑料配煤炼焦机理研究及进展

基于高温干馏技术,利用煤与废塑料共焦化技术处理废塑料可将其转化为焦化产品,实现废塑料的资源化利用和无害化处理。在此从分析煤与废塑共焦化机理方面,探究共焦化对炼焦的影响,表明添加一定比例废塑料可略提高焦炭质量,增加焦油及焦炉煤气产率,同时降低化合水产率,说明废塑料的添加提高了煤中氢的利用率。     

Assessment of polychlorinated dibenzo-p-dioxins and dibenzofurans in sludges according to the European environmental policy

The amount of sewage sludge generated in Europe is expected to surpass the 10 million tons/year in 2006 as a result of the waste water treatment process according to the Water Policy in European Union. Sewage sludge is what is left behind after water is cleaned in waste treatment plants and is characterized for this high content in nitrogen and phosphorous that could be of great importance in agriculture as fertilizer or soil conditioner. On the other hand, pollutants like metals and organic contaminants are usually removed from water and are accumulated in the sewage sludge, reaching the food chain if their concentrations are not below the safe limits established by the European legislation. The latter issue is of great concern nowadays and in this sense, different works alert against the use of the sewage sludge in agriculture arguing that serious illnesses, even resulting in death as well as adverse environmental impacts are associated to the application of sewage sludge. This work is a continuation of a former comprehensive survey on of priority organic pollutant in sludges for agricultural purposes carried out by our group in Catalonia and this time is focused on the polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F), one of the most toxic group of organic compounds listed in the Work Document on Sludge which is the reference tool in this field in Europe and is also included in the Stockholm Convention. Eighty eight samples were collected from the end of 2003 to April 2006 and the concentrations detected were lower than the 100 ng/kg I-TEQ limit recommended by the European legislation (EC, 2000). Thus, sewage sludges generated in Catalonia do not represent a threat to human health if they are used as fertilizers in agriculture.     

Effects of waste recovery on carbon footprint: a case study of the Gulf of Bothnia steel and zinc industries

This article analyses the impact of waste recovery on climate change mitigation on a regional scale. We focus on the EU End of Waste (EoW) policy, which aims at reducing negative impacts on the environment through the minimization of generated waste. At the same time, the EU climate objectives set challenging goals for the industry to lower greenhouse gas emissions. We argue that the goals of these two policies are conflicting: under certain circumstances, the EoW will lead into increased greenhouse gas emissions because of a number of negative feedback effects that function on multiple spatial and temporal scales.To assess the effects of waste recovery on greenhouse gas emissions, we carry out a consequential life-cycle inventory on a proposed industrial ecosystem around the Gulf of Bothnia between Finland and Sweden. The system recovers currently unutilized steelmaking dust and slag from four steel mills in Finland and Sweden and converts them into iron and zinc raw materials in a novel rotary hearth furnace. The recovered iron is led back into the blast furnace of one of the steel mills and zinc is treated in an existing zinc plant. In the European scale, the model system is significant in size, serving thus as a model for integrated EoW and carbon footprint assessments in other similar cases within the EU.The analysis reveals the relative greenhouse gas emissions from raw material extraction and production, heat and power generation, transport and the production process itself, in comparison to the present system with limited material recovery. To test the model viability, we conduct a sensitivity analysis with respect to increasing energy and production capacity. Our analysis shows that from the point of view of a single operator, material recovery may bring noteworthy reductions in greenhouse gas emissions. If the scale of the assessment is expanded beyond the confines of a single plant, however, we find limited potential for reducing greenhouse gas emissions through further recovery of steelmaking residues. In conclusion, we provide policy recommendations with which the EoW paradigm can provide better support for climate change mitigation on a regional scale.     

Resource productivity enhancement as means for promoting cleaner production: analysis of co-incineration in cement plants through a life cycle approach

The objective of this paper is to assess the environmental effectiveness of a strategic measure aimed at resource productivity enhancement. The cement industry has been identified as a relevant sector for this global issue, since the related production process enables the use of waste in partial substitution of raw materials and in substitution of traditional fuels. The analysis of the cement production sector in Italy has been here performed, investigating the recovery of energy from waste through co-incineration. In terms of air emissions, the emission performances of cement kilns appear independent from the use of alternative fuels at the percentages usually employed. However, in order to measure the cleanliness of a production system, systematic analysis with global perspective is needed. For this aim, the principles of Life Cycle Assessment (LCA) have been used for a case study analysis of an Italian active plant using an amount of recovered plastics as an alternative fuel resource. The improvement on the investigated process has been quantitatively measured as a way for cleaner production, first in terms of gross energy requirement, and then through an environmental performance comparison with a sector benchmark. The analysis has highlighted the benefits on the global environmental balance for the practice of co-incineration in the cement production process.     

复合过滤法处理生物质焦油废水技术的研究

采用"复合过滤法"处理生物质焦油废水,通过分析生物质焦油废水水质特点,筛选出滤料的种类、确定滤料的配置比,并经实验对比分析。结果表明,经复合过滤法处理后的焦油废水COD、焦油、SS的去除率分别达到54%、60%、68%。该技术工艺简单,运行成本低,管理方便,可广泛用于农村生物质气化站的焦油废水处理。     

Fabrication of supported acid catalytic composite fibers by a simple and low-cost method and their application on the synthesis of liquid biofuel 5-ethoxymethylfurfural

In this paper, sulfonic groups functionalized annealed bio-based carbon microspheres loaded polytetrafluoroethylene (A-BCMSs-SO3H@PTFE) fibers with high activity, high stability, and easy regeneration were successfully fabricated by a simple method using low-cost raw materials. The characterization results showed that the annealed biomass carbon microspheres derived from waste Camellia oleifera shells were evenly distributed on the polytetrafluoroethylene fibers and the sulfonic groups can be successfully loaded on the surface of annealed biomass carbon microspheres by room temperature sulfonation. Subsequently, the as-prepared A-BCMSs-SO3H@PTFE fibers were applied to the acid-catalyzed synthesis of liquid biofuel 5-ethoxymethylfurfural. The catalytic experiment results indicated that the annealing temperature and time during catalyst preparation have a significant effect on the activity and selectivity of A-BCMSs-SO3H@PTFE fibers. The results of catalytic reaction kinetics showed that the yield of 5-ethoxymethylfurfural can reach more than 60％after 72 h of acid-catalyzed reaction. The stability test showed that the as-prepared A-BCMSs-SO3H@PTFE fibers still maintained a stable acid catalytic activity after four recycles.     

低温等离子体技术在三废处理中的应用与研究

对“三废”的低温等离子体处理技术进行了综合分析，探讨了低温等离子体“三废”处理技术的应用前景，提出了低温等离子体技术在环境保护领域里应用的研究课题．     

居民对垃圾焚烧发电态度的实证研究——以泰安市垃圾焚烧电厂为例

基于对山东省泰安市垃圾焚烧发电厂周边居民的调查数据,运用SPSS20.0统计软件对数据进行二元Logistic回归分析,探讨垃圾焚烧发电厂周边居民对电厂态度的影响因素。实证结果表明,受教育年限、是否被征求意见、是否接受物质补偿3个变量对周边居民的态度有显著的正向影响;而是否知道二噁英、居住地与电厂距离与周边居民态度呈显著负相关关系。结合相关研究,发现本研究中影响电厂周边居民态度的因素既有普遍性,也有其特殊性。     

Evaluation of life cycle inventory data for recycling systems

This paper reviews databases on material recycling (primary as well as secondary production) used in life cycle assessments (LCA) of waste management systems. A total of 366 datasets, from 1980 to 2010 and covering 14 materials, were collected from databases and reports. Totals for CO₂-equivalent emissions were compared to illustrate variations in the data. It was hypothesised that emissions from material production and the recycling industry had decreased over time due to increasing regulation, energy costs and process optimisation, but the reported datasets did not reveal such a general trend. Data representing the same processes varied considerably between databases, and proper background information was hard to obtain, which in turn made it difficult to explain the large differences observed. Those differences between the highest and lowest estimated CO₂ emissions (equivalents) from the primary production of newsprint, HDPE and glass were 238%, 443% and 452%, respectively. For steel and aluminium the differences were 1761% and 235%, respectively. There is a severe lack of data for some recycled materials; for example, only one dataset existed for secondary cardboard. The study shows that the choice of dataset used to represent the environmental load of a material recycling process and credited emissions from the avoided production of virgin materials is crucial for the outcome of an LCA on waste management. Great care and a high degree of transparency are mandatory, but advice on which datasets to use could not be determined from the study. However, from the gathered data, recycling in general showed lower emission of CO₂ per kg material than primary production, so the recycling of materials (considered in this study) is thus beneficial in most cases.