庆大霉素-金霉素混合制药废水处理中试研究

运用厌氧-好氧-复配混凝技术进行了庆大霉素、金霉素混合制药废水处理中试研究,中试规模为日处理废水10~12t。在中试稳定运行时,进水的COD平均浓度为14218mg/L,出水的COD平均浓度低于制药行业排放标准(300mg/L)。      

泔脚的厌氧消化处理可行性研究

介绍了作者在泔脚厌氧消化处理方面的研究情况，作者通过新鲜泔脚的特性分析试验、脱水实验、最佳接种率，最佳含水率实验，最大有机负荷实验等一系列系统的实验。完成了工程小试，达到了实验目的，得到了一些对实际工程应用十分有用的数据。认为厌氧消化对泔脚的处理是生态上比较合理，经济上可行的处理方法。     

Preparation of ultrahigh-surface-area sludge biopolymers-based carbon using alkali treatment for organic matters recovery coupled to catalytic pyrolysis

In this work, we employed waste activated sludge (WAS) as carbon source to prepare ultrahigh specific surface area (SSA) biopolymers-based carbons (BBCs) through alkali (KOH) treatment coupled to pyrolysis strategy. Before the pyrolysis process, the involvement of KOH made a great recovery of soluble biopolymers from WAS, resulting in highly-efficient catalytic pyrolysis. The Brunner-Emmett-Teller and pore volume of BBCs prepared at 800°C (BBC₈₀₀) reached the maximum at 2633.89 m²·g^?1 and 2.919 m³·g^?1, respectively. X-ray photoelectron spectroscopy suggested that aromatic carbon in the form of C=C was the dominant fraction of C element in BBCs. The N element in BBCs were composed of pyrrolic nitrogen and pyridinic nitrogen at 700°C, while a new graphitic nitrogen appeared over 800°C. As a refractory pollutant of wastewater treatment plants, tetracycline (TC) was selected to evaluate adsorption performance of BBCs. The adsorption behavior of BBCs towards TC was conformed to the pseudo-second-order kinetic and the Langmuir models, signifying that chemisorption of monolayers was dominant in TC adsorption. The adsorption capacity of BBC₈₀₀ reached the maximum at 877.19 mg·g^?1 for 90 min at 298 K. Thermodynamic analysis indicated that the adsorption process was endothermic and spontaneous. Hydrogen bonding and π-π stacking interaction were mainly responsible for TC adsorption, and interfacial diffusion was the main rate-control step in adsorption process. The presence of soluble microbial products (SMPs) enhanced TC removal. This work provided a novel strategy to prepare bio-carbon with ultrahigh SSA using WAS for highly-efficient removal of organic pollutants.     

Solid waste characteristics and their relationship to gas production in tropical landfill

Solid waste characteristics and landfill gas emission rate in tropical landfill was investigated in this study. The experiment was conducted at a pilot landfill cell in Thailand where fresh and two-year-old wastes in the cell were characterized at various depths of 1.5, 3, 4.5 and 6 m. Incoming solid wastes to the landfill were mainly composed of plastic and foam (24.05%). Other major components were food wastes (16.8%) and paper (13.3%). The determination of material components in disposed wastes has shown that the major identifiable components in the wastes were plastic and foam which are resistant to biodegradation. The density of solid waste increased along the depth of the landfill from 240 kg m⁻³ at the top to 1,260 kg m⁻³ at the bottom. Reduction of volatile solids content in waste samples along the depth of landfill suggests that biodegradation of solid waste has taken place to a greater extent at the bottom of the landfill. Gas production rates obtained from anaerobic batch experiment were in agreement with field measurements showing that the rates increased along the depth of the landfill cell. They were found in range between 0.05 and 0.89 l kg⁻¹ volatile solids day⁻¹. Average emission rate of methane through the final cover soil layer was estimated as 23.95 g⁻²day⁻¹ and 1.17 g⁻²day⁻¹ during the dry and rainy seasons, respectively.     

Monitoring quantity and characteristics of municipal solid waste in Dhaka City

A reliable estimate of the quantity of solid waste generation in the city is very important for proper solid waste planning and management. However, reported estimates of solid waste generation vary widely and lead to questionability. The reported values have been derived on the assumption of demography, standard rate of waste generation by households, density values, number of trucks engaged for waste transportation and monitoring of truck movement at dump sites, etc. This diverse nature of the available data and the question of accuracy necessitate a rigorous study that has tried to document the waste quantity in the recently formulated master plan of Dhaka City. The socio-economic parameters, behavioral characteristics, generation sources, seasonality, and per capita growth rate are considered in estimating the waste quantity along with its future projections. The findings from the estimation of waste quantities state that seasonal differences in the municipal solid waste stream are not substantial. The most seasonably variable material in the municipal solid waste stream is food waste. Residential waste is relatively homogeneous. Although there are some differences in waste generation depending on demographic and other local factors, most households dispose of essentially similar types of wastes. Variation occurs in waste composition dependent upon income levels and category of sources. Variation also occurs based upon the extent of source reduction and recycling opportunities. As opportunities exist to recycle wastes, the recycling facilities might have to grow at a similar pace to the generation of waste. Physical and chemical characteristics of solid waste are important to implement the waste disposal and management plan for the selection of resource and energy recovery potentials. A number of studies have been conducted to determine the composition of wastes including moisture content and calorific value. The data show that the moisture content in city waste is significantly higher and the calorific value is much lower, which determines the viability of composting or anaerobic digestions rather than waste combustion.     

火化场焚烧污染现状及存在问题

从环保角度入手,着重调查沈阳市全市范围内殡葬行业现有状况,重点研究了火化机焚烧尸体后产生的废气污染问题,并提出几点对策和建议。监测结果表明,烟尘、二氧化硫和氮氧化物等废气污染物的排放浓度超过国家标准要求。     

电感耦合等离子体原子发射光谱法测定废水中的铊

采用电感耦合等离子体原子发射光谱仪(ICP-AES)测定废水中铊,并对测定波长、介质及其酸度、共存元素干扰等因素进行分析和条件优化,使该方法在0 mg/L~5.00 mg/L范围内线性良好,相关系数为0.999 9。方法检出限为22μg/L,该方法对铊标准样品测定的结果在保证值范围内,4份废水样7次测定结果的RSD为0.2%~0.8%,实际废水样品的加标回收率为98.0%~100%。     

废酸的综合治理与资源化研究进展

通过对废酸处置行业的现状调查研究,探讨了双极膜法、结晶法、中和法、喷雾焙烧法、离子交换法、化学转化法等典型废酸处置工艺的特点及存在的问题。以提高环境和经济效益为前提,针对废酸处置行业普遍存在的重金属处理问题,提出将电解法、双极膜法和离子交换法等关键技术集成和改性,形成具有耐酸和重金属高效去除等能力的针对废酸特点的新工艺等建议。     

废弃电器电子产品产生量测算方法探究

选取我国废弃电器电子产品中回收处理数量最多、获得政策基金补贴最多的电视机产品,通过对其销量、最长使用年限、报废高峰期、报废系数的分析,采用市场供给A模型测算其报废产生量,并进一步对废弃电视机产生量测算结果与实际处理量做对比分析,提出废电视机产生量的修正方法。最终测算得到废电视机产生量为4 213万台,与同年电视机的实际处理量持平。     

市政垃圾焚烧飞灰中添加CaO抑制PCDD/Fs生成试验探究

采用自制装置,以CaO作为PCDD/Fs生成抑制剂,对市政垃圾焚烧飞灰做热处理。通过试验考察温度、CaO添加量等因素对飞灰中PCDD/Fs生成的影响。结果表明：质量分数为5%的CaO添加可以减少80%的PCDD/Fs生成。