Characterization of post-consumer polyolefin wastes by hyperspectral imaging for quality control in recycling processes

In this paper new analytical inspection strategies, based on hyperspectral imaging (HSI) in the VIS–NIR and NIR wavelength ranges (400–1000 and 1000–1700 nm, respectively), have been investigated and set up in order to define quality control logics that could be applied at industrial plant level for polyolefins recycling. The research was developed inside the European FP7 Project W2Plastics “Magnetic Sorting and Ultrasound Sensor Technologies for Production of High Purity Secondary Polyolefins from Waste”. The main aim of the project is the separation of pure polyethylene and polypropylene adopting an innovative process, the magnetic density separation (MDS). Spectra of plastic particles and contaminants resulting from post-consumer complex wastes and of virgin polyolefins have been acquired by HSI and by Raman spectroscopy. The classification results obtained applying principal component analysis (PCA) on HSI data have been compared with those obtained by Raman spectroscopy, in order to validate the proposed innovative methodology. Results showed that HSI sensing techniques allow to identify both polyolefins and contaminants. Results also demonstrated that HSI has a great potentiality as a tool for quality control of feed (identification of contaminants in the plastic waste) and of the two different pure polypropylene and polyethylene flow streams resulting from the MDS-based recycling process.     

Sorption of apolar and polar organic contaminants by waste tire rubber and its chars in single- and bi-solute systems

Single- and bi-solute sorption of organic compounds [1,3-dichlorbenzene (DCB), 1,3-dinitrobenzene (DNB) and 2,4-dichlorophenol (DCP)] on ground tire rubber and its chars was studied. The chars were prepared by pyrolyzing tire rubber at different temperatures (200-800 °C). Their surface area, aromaticity and hydrophobicity increase greatly with pyrolytic temperature, and the polymeric phase is partly converted into a condensed phase. The sorption of DNB and DCP increases with pyrolytic temperature and is characterized by a transition from a partition dominant to an adsorption dominant process. However, the sorption of DCB linearly decreases with the pyrolytic temperature. The enhanced adsorption of DNB and DCP on carbonized phase is primarily attributed to nonhydrophobic interactions such as π-π electron-donor-acceptor interactions and/or H bonding. The higher partition of DCB to polymeric phase is attributed to its high hydrophobicity. Competitive sorption between DCB and DCP on the tire chars is highly dependent on dissociation of the latter.     

Wastewater treatment plants and landfills emit volatile methyl siloxanes (VMSs) to the atmosphere: investigations using a new passive air sampler

Volatile methyl siloxanes (VMSs) are a class of chemicals with an increasing range of applications and widespread distribution in the environment. Passive air samplers (PAS) comprising sorbent-impregnated polyurethane-foam (SIP) disks were first calibrated and then deployed around two wastewater treatment plants (WWTPs) and at two landfill sites to investigate inputs of VMSs to air. SIP-derived air concentrations for ΣVMSs (ng/m³) at background sites on the perimeter of the WWTP were 479 ± 82.3 and comparable to results for the upwind samples at the landfills (333 ± 194). Order of magnitude higher concentrations of ΣVMSs (ng/m³) were found for on-site samples at the WWTPs (3980 ± 2620) and landfills (4670 ± 3360). Yearly emissions (kg/yr) to air were estimated and ranged from 60-2100 and 80-250, respectively, for the cyclic VMSs. These findings demonstrate and quantify for the first time, waste sector emissions of VMSs to the atmosphere.     

Soil plate bioassay: an effective method to determine ecotoxicological risks

Levels of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) were measured in the breast milk of mothers living in Giugliano (Campania, Italy), an area at increased risk of PCDD and PCDF exposure caused by recent and serious open-air waste-combustion accidents. Polychlorinated biphenyls (PCBs) in milk samples were also studied. Breast milk was also monitored in two cities in northern Italy, Milan and Piacenza, which were selected as controls. Other variables, such as diet and age of the mothers, were also studied. PCDD/F and PCB levels and congener profiles in breast-milk samples were similar in all these cities, though total PCDD/F and DL-PCB TEQs in samples from Giugliano were significantly lower than those in Milan and Piacenza (8.65 pg WHO-TEQ in Giugliano vs. 11.0 and 9.94 pg WHO-TEQ in Milan and Piacenza respectively). Thus no direct correlations were found between PCDD/F and PCB levels in breast milk and the suspected increased exposure through open-air waste combustion in Giugliano. Diet did not seem to affect PCDD/F and PCB levels, whereas a significant correlation was observed between the mother’s age and an increased concentration of PCDDs/Fs and PCBs in milk. Comparison of these findings with those of previous surveys in Italy in 2000-2001 showed a marked reduction of PCDD/F (about 60%) and DL-PCB (about 20%) levels in breast milk occurring over the last 10 years. This might well be a result of well functioning legislation, for example European Directives on of the reduction of the emission limits of PCDDs/Fs and PCBs from waste incineration set by EU Directive 2000/76/EC implemented in 2000, or Commission Regulations such as (EC) No. 466/2001 and 1881/2006 setting maximum levels for certain contaminants in foodstuffs.     

Characterization of eco-cement paste produced from waste sludges

In this study, marble sludge, sewage sludge, drinking water treatment plant sludge, and basic oxygen furnace sludge were used as replacements for limestone, sand, clay, and iron slag, respectively, as the raw materials for the production of cement in order to produce eco-cement. It was found that it is feasible to use marble sludge to replace up to 50% of the limestone and also that other materials can serve as total replacements for the raw materials typically used in the production of cement. The major components of Portland cement were all found in eco-cement clinkers. The eco-cement was confirmed to produce calcium hydroxide and calcium silicate hydrates during the hydration process, increasing densification with the curing age. The compressive strength (S_c) and microstructural evaluations conducted at 28 d revealed the usefulness of eco-cement. It was observed that the S_c data correlated linearly with the pore volume (P) data at 28 d. The proposed model equation could be represented as S_c = 178-461P (correlation coefficient, R² = 0.96). Two parameters, the large capillary pore volume and the medium capillary pore volume, were evaluated using multiple regression analysis.     

欧盟废物焚烧指令的研究与借鉴

为进一步完善我国废物焚烧标准体系,防控废物焚烧环境风险,本文对欧盟废物焚烧指令与我国焚烧标准体系进行了对比分析。欧盟废物焚烧指令分别对专用焚烧厂和协同焚烧厂从废物运输到处理处置全过程的污染物排放控制做出了相关规定,适用于危险废物和非危险废物的焚烧以及常规污染物和有毒污染物的控制。欧盟废物焚烧指令对不同规模的焚烧设施采用统一标准,以日均值和半小时均值为污染物排放限值,更客观、准确地评价了污染物排放对环境的影响。与欧盟废物焚烧指令相比,我国废物焚烧标准涉及废物联合利用处置的相关条文较少,内容不详,项目缺失。我国烟尘、HCl的排放限值均在欧盟标准限值6倍以上,SO2的排放限值是欧盟标准的4~8倍。除CO、NOx的排放限值外,其他污染物排放限值也明显高于欧盟标准限值。我国采用抽样监测方法,监测结果可能在日常排放值的95%置信区间外,不具备代表性。我国可借鉴欧盟废物焚烧指令的成果制定协同焚烧标准,并严格污染物排放限值,考虑采用日均值或半小时均值的评价方法,提高我国废物焚烧标准的精确性和可执行性。     

Removing lead from metallic mixture of waste printed circuit boards by vacuum distillation: Factorial design and removal mechanism

The lead removal from the metallic mixture of waste printed circuit boards by vacuum distillation was optimized using experimental design, and a mathematical model was established to elucidate the removal mechanism. The variables studied in lead evaporation consisted of the chamber pressure, heating temperature, heating time, particle size and initial mass. The low-level chamber pressure was fixed at 0.1 Pa as the operation pressure. The application of two-level factorial design generated a first-order polynomial that agreed well with the data for evaporation efficiency of lead. The heating temperature and heating time exhibited significant effects on the efficiency, which was validated by means of the copper–lead mixture experiments. The optimized operating conditions within the region studied were the chamber pressure of 0.1 Pa, heating temperature of 1023 K and heating time of 120 min. After the conditions were employed to remove lead from the metallic mixture of waste printed circuit boards, the efficiency was 99.97%. The mechanism of the effects was elucidated by mathematical modeling that deals with evaporation, mass transfer and condensation, and can be applied to a wider range of metal removal by vacuum distillation.     

A novel dismantling process of waste printed circuit boards using water-soluble ionic liquid

Recycling processes for waste printed circuit boards (WPCBs) have been well established in terms of scientific research and field pilots. However, current dismantling procedures for WPCBs have restricted the recycling process, due to their low efficiency and negative impacts on environmental and human health. This work aimed to seek an environmental-friendly dismantling process through heating with water-soluble ionic liquid to separate electronic components and tin solder from two main types of WPCBs—cathode ray tubes and computer mainframes. The work systematically investigates the influence factors, heating mechanism, and optimal parameters for opening solder connections on WPCBs during the dismantling process, and addresses its environmental performance and economic assessment. The results obtained demonstrate that the optimal temperature, retention time, and turbulence resulting from impeller rotation during the dismantling process, were 250 °C, 12 min, and 45 rpm, respectively. Nearly 90% of the electronic components were separated from the WPCBs under the optimal experimental conditions. This novel process offers the possibility of large industrial-scale operations for separating electronic components and recovering tin solder, and for a more efficient and environmentally sound process for WPCBs recycling.     

Detection of Escherichia coli in a cattle manure composting process by selective cultivation and colony polymerase chain reaction

Livestock manure is suitable for use as a composting material. However, various intestinal microbes, such as Escherichia coli, are significant components of such manures. Thus, it is desirable that the level of intestinal microbes, and particularly opportunistic pathogens, in compost is inspected and counted regularly. The sensitivity and specificity of detection of E. coli in compost have been improved by selective cultivation followed by colony polymerase chain reaction (PCR) using the ECO primer. Indeed, the sensitivity of this method is higher than that of DNA extraction from compost and PCR. In this study, changes in numbers of E. coli present in a field-scale composting process over time was assessed using selective cultivation and colony PCR. Numbers of ECO-positive colonies after 24 h decreased, with a concomitant rise in compost temperature. ECO-positive colonies were not detected from 33 to 48 h. However, ECO-positive colony numbers increased beginning on day 4 and continuing until day 42. Thus, it seems likely that the high temperatures reached during the composting process did not affect E. coli numbers in the final compost. Additionally, selective cultivation followed by colony PCR using specific primers is an appropriate method of determining levels of cultivable pathogens in composted materials.     

Performance Evaluation of Waste Activated Carbon on Atrazine Removal from Contaminated Water

Abstract

In this study, the potential of spent activated carbon from water purifier (Aqua Guard, India) for the removal of atrazine (2 chloro-4 ethylamino-6-isopropylamino-1, 3, 5 triazine) from wastewaters was evaluated. Different grades of spent activated carbon were prepared by various pretreatments. Based on kinetic and equilibrium study results, spent activated carbon with a grain size of 0.3–0.5 mm and washed with distilled water (designated as WAC) was selected for fixed column studies. Batch adsorption equilibrium data followed both Freundlich and Langmuir isotherm. Fixed bed adsorption column with spent activated carbon as adsorbent was used as a polishing unit for the removal of atrazine from the effluent of an upflow anaerobic sludge blanket (UASB) reactor treating atrazine bearing domestic wastewater. Growth of bacteria on the surface of WAC was observed during column study and bacterial activity enhanced the effectiveness of adsorbent on atrazine removal from wastewater.