Influence of bromine on metal volatilization in waste combustion

Co-combustion tests of municipal solid waste and bromine-containing waste plastics have been performed in the TAMARA test incinerator in order to investigate the fate of bromine in waste combustion. HBr is the main bromine combustion product. Approximately 50% of the bromine inventory stays in the grate ashes, which is much more than is found for chlorine. The percentage of bromine transferred into the fly ash also exceeds that of chlorine. There is a strong indication that bromine has a promoting effect upon the volatility of most of the heavy metals that are typically mobilized by chlorine. Received: February 2, 2000 / Accepted: March 3, 2000     

垃圾焚烧炉预处理系统设计与优化

论述了垃圾预处理系统的一些关键设备和技术要点,分析了垃圾焚烧炉预处理系统的流程设计和不同的设备组合方式,并介绍了一种用于循环流化床焚烧炉的预处理系统流程和试验结果。     

废橡胶制备燃料油和炭黑

介绍了由废旧橡胶通过催化裂解制备燃料油和炭黑的方法,着重探讨了影响燃料油产率的因素,结果表明在优化条件下燃料油收率达42％,炭黑纯度在97％以上。     

生活垃圾厌氧堆肥产甲烷特性研究

为了更好地利用厌氧处理产生的气体,在介绍模拟厌氧堆肥试验的基础上,对厌氧堆肥产甲烷的基本特性进行了研究。结果表明,在厌氧堆肥开始阶段20d左右,甲烷只有7．8％（质量分数,下同）左右,远远低于32．8％的二氧化碳;而随着反应的进行,二氧化碳呈下降趋势,甲烷先升高后降低,直到反应进行到第70天左右时,甲烷才逐渐高于二氧化碳,片于第90天左右时达到最高值42．0％;此后二氧化碳及甲烷都逐渐降低,但甲烷始终高于二氧化碳。     

Two-stage thermal gasification of polyolefins

Plastic pellets of polyethylene (PE), polypropylene (PP), and polystyrene (PS) were gasified in a two-stage thermal degradation process. The first stage is the conversion of polyolefins to distilled oils using a melting vessel. In the second stage, the oils from the first stage are gasified using a tubular reactor. The distilled oil yields of PE, PP, and PS in the first stage were 84, 89, 92 wt%, respectively, each at 470°C. The total gas yields of PE, PP, and PS in the second stage were 80, 74, and 6.2 wt%, respectively, each at 800°C. The main components of the product gas for PE and PP were methane and olefins such as ethene and propene. Some aromatic oils, including benzene, toluene, and xylene, were also produced as by-products. The amount of carbonaceous residue, or coke, was very low (less than 1 wt%). By dividing the process into two stages, the coking rate was considerably reduced compared with direct gasification of the polyolefins. Received: July 19, 2000 / Accepted: September 17, 2000     

煤矸石制取聚合氯化铝原理及工艺

介绍了固体废物煤矸石制取混凝剂聚合氯化铝的基本原理及工艺流程，通过技术与经济分析，确立了煤矸石开发利用的新领域．     

应用GM（1，1）模型的简化算法预测废水排放量

从GM（1，1）的建模原理和模型结构特征出发，通过一系列的推导、变换、给出了直接从原始序列出发求解模型的方法，通过对某市废水排放量预测的应用建模计算比较，表明该方法是切实可行的。     

废线路板处理工艺中持久性有毒物质环境释放特征

以江苏省某示范企业为例,对废线路板退锡和粉碎2个处理阶段的有组织、无组织废气以及废线路板处理余物中的持久性有毒物质(PTS)进行检测,并对其环境释放特征进行分析。结果表明,退锡阶段无组织废气中氯代二噁英类物质的浓度显著高于有组织废气,粉碎阶段有机和无机PTS浓度均高于退锡阶段,无机PTS的环境释放主要为悬浮颗粒物中的Pb、Cd、Cr及其化合物。通过PTS物质流分析可知,无机PTS释放质量分数(0. 0%～22. 0%)高于有机PTS释放质量分数(0. 0%～1. 0%),在金属和非金属粉末中含有大量的有机PTS。提出,采用自动化设施,减少工人的车间工作时间,降低其职业暴露风险,并关注废线路板处理余物的后续使用与处理。     

水和废水中亚硝酸盐氮的现场快速分析方法研究

在现行水中亚硝酸盐氮分析方法的基础上,通过试验研究,采用便携式分光光度计建立了水体中亚硝酸盐氮的分析方法。该法与GB7493-87[N-(1-萘基)-乙二胺光度法]具有良好的可比性,分析结果的精密度和准确度均为良好,该方法可在现场简便快速测定水和废水中的亚硝酸盐氮。     

试论“废物最少化”

本文对“废物最少化”的提出、内涵、定义、各种模式及引入我国环境管理制度体系的必要性和可能性作了系统的论述。