壳聚糖复合吸附剂对油的吸附性能

以天然可生物降解的壳聚糖和硬脂酸为原料,通过壳聚糖2位氨基与硬脂酸的羧基相互作用,引入疏水烷基链,制备了疏水的壳聚糖-硬脂酸复合吸附剂(简称复合吸附剂),采用傅立叶红外光谱、X射线衍射对复合吸附剂的结构进行表征,并考察了复合吸附剂对油的回收性能.实验结果表明:壳聚糖和硬脂酸以离子形式结合得到复合吸附剂;当硬脂酸与壳聚糖质量比为0.7时,硬脂酸的结合量最大;复合吸附剂对油的吸附量、保油率、脱附率的顺序分别为花生油(14.93 g/g)>甲基硅油(10.71 g/g)>液体石蜡(9.37 g/g),花生油(94.51%)>液体石蜡(90.74%)>甲基硅油(78.69%),花生油(95.62%)>液体石蜡(93.27%)>甲基硅油(90.73%).     

锆铁复合氧化物颗粒对As（Ⅴ）的去除研究

系统研究了锆铁氧化物颗粒吸附剂（GZI）对As（Ⅴ）的去除性能,考察了反应时间、溶液pH、初始As（Ⅴ）浓度、共存离子等反应条件的影响.同时评价了吸附后材料的脱附性能及动态处理后材料的安全性.实验结果显示,初始浓度低于20 m.gL^-1时,5 h后As（Ⅴ）在GZI吸附剂上达到平衡,初始浓度为50 m.gL^-1时,...     

水合氧化镧吸附除磷的试验研究

以开发新型高效除磷吸附剂材料为目的,以金属水合氧化物MeH(metal hydrate)为试验对象,对所选材料进行了吸附除磷性能评价.通过对多种水合金属氧化物吸附除磷性能的比较研究,发现水合氧化镧LaH(lan-thanum hydrate)具有优异的除磷吸附容量,其吸附容量大约为参照物粉末活性氧化铝的十几倍.该吸附剂的吸附容量随pH值变化显著,在pH=3附近达最大值;吸附等温线较符合Langmuir方程;进行了抗无机阴离子干扰能力测试,给出了干扰离子的影响顺序;该吸附剂对正磷酸根的去除性能优越,但对聚磷酸根的去除效果不理想.试验结果表明,水合氧化镧在平衡吸附容量、pH适应范围等方面与参照物活性氧化铝相比较,具有优异的性能.     

吸附法处理含砷废水的研究进展

水体砷污染严重威胁着人类健康和生态系统,砷污染防治成为全球性环境问题,含砷水处理受到人们的普遍关注.与其它除砷方法相比较,吸附法具有去除效率高,稳定性好,不产生或很少产生二次污染,吸附剂可重复使用等优点,因而备受青睐.本文简要介绍了吸附法除砷的原理与特点,重点综述了矿物质、活性炭、金属(氢)氧化物、生物吸附剂、离子交换...     

响应曲面法优化污泥基吸附剂处理含铅选矿废水的实验条件

针对碱性含铅选矿废水的处理问题,利用CaO-SA对广东省某含铅选矿废水进行了吸附研究。通过单因素实验,研究了吸附时间、pH、温度和吸附剂投加量等因素对吸附剂吸附Pb²⁺的影响。利用Box-Behnken 实验设计探究了吸附时间、pH、温度和投加量对Pb²⁺的吸附影响并优化最优工艺参数,最后对CaO-SA吸附Pb²⁺的机理进行探讨。单因素实验结果表明：吸附饱和时间为60 min;吸附剂最优投加量为5 g·L⁻¹;提高温度有利于吸附的进行;在碱性条件下,投加量为5 g·L⁻¹,适当增加温度有利于提高Pb²⁺的去除率。通过Box-Behnken 实验设计探究发现：各因素对吸附效果的影响顺序为温度>吸附时间>投加量> pH;在最佳条件(投加量为6 g·L⁻¹、温度40 ℃、pH=11、吸附时间为30 min)下,Pb²⁺的去除率为99.63%;在较短吸附时间内,适当地增加投加量与提高温度有助于提高Pb²⁺的去除率。对CaO-SA的SEM表征结果显示,该材料孔隙发达,提供吸附位点多。红外光谱与XRD的结果显示,CaO-SA对Pb²⁺的吸附主要为吸附剂中羧酸盐与Pb²⁺结合的化学吸附,其次是吸附剂中大量存在的硅酸盐与Pb²⁺结合的物理吸附。以上研究结果可为CaO-SA工业化应用提供参考。     

改性活性焦及其脱硫性能的研究

以褐煤为主要原料,以煤焦油为粘结剂,加入一定量的金属氧化物制成的改性活性焦,具有良好的吸附能力和机械性能,脱硫效率高并易于再生,为烟气脱硫提供了一种新的吸附剂。     

壳聚糖/改性平菇复合吸附剂对Cr(VI)的吸附特性

以壳聚糖和经酒石酸改性的平菇粉末为材料,通过戊二醛进行交联反应,制得壳聚糖-改性平菇凝胶小球（CMPOD）复合生物吸附剂,用于水溶液中Cr（VI）的吸附去除.结果表明,在实验所测pH值（2~10）范围内,复合吸附剂对Cr（VI）的吸附量随着pH值上升而降低;随着Cr（VI）初始浓度或温度的提高,吸附剂对Cr（VI）的吸附量均相应增加,当Cr（VI）初始浓度为600mg/L,温度为50℃,Cr（VI）吸附量可达190mg/g以上;Cr（VI）的吸附符合准二级动力学方程及Freundlich等温吸附模型;热力学分析表明,吸附剂对Cr（VI）的吸附过程为自发的吸热反应.扫描电镜（SEM）分析显示,吸附剂具有发达的网状结构,吸附Cr（VI）后网状孔隙被填充,且能谱分析（EDS）出现明显的Cr（VI）吸收峰;傅立叶红外光谱分析（FTIR）表明,壳聚糖中的氨基成功引入复合吸附剂中,在Cr（VI）吸附中为主要作用官能团.     

Low-temperature plasma induced phosphate groups onto coffee residue-derived porous carbon for efficient U(VI) extraction

For the continuous utilization of nuclear energy and efficient control of radioactive pollution, low-cost materials with high efficient U(VI) removal are of great importance. In this study, low temperature plasma method was applied for the successful modification of O-phosphorylethanolamine (O-PEA) on the porous carbon materials. The produced materials (Cafe/O-PEA) could adsorb U(VI) efficiently with the maximum sorption capacity of 648.54 mg/g at 1 hr, T=298 K, and pH=6.0, much higher than those of most carbon-based composites. U(VI) sorption was mainly controlled by strong surface complexation. From FTIR, SEM-EDS and XPS analyses, the sorption of U(VI) was related to the complexation with -NH₂, phosphate and -OH groups on Cafe/O-PEA. The low temperature plasma method was an efficient, environmentally friendly and low-cost method for surface modification of materials for the effective enrichment of U(VI) from aqueous solutions.     

Fixed-bed adsorption of Malachite Green onto binary solid mixture of adsorbents: seashells and eggshells

In this work, continuous removal of Malachite Green from aqueous solution by adsorption was investigated using a laboratory scale fixed-bed column packed with binary solid mixture of seashell powder (SSP) and eggshell powder (ESP). The effects of initial dye concentration, feed flow rate, bed height, and the SSP?:?ESP ratio in the binary solid mixture on the breakthrough characteristics were studied. The breakthrough time decreased with increase in the flow rate and the initial dye concentration. The breakthrough time also varied greatly with change in bed height. The breakthrough time increased from 17.2?h to 34.5?h with increase in bed height from 6?cm to 12?cm. The breakthrough time was significantly affected by the change in the SSP?:?ESP ratio in the binary mixture. The breakthrough time decreased with increase in the SSP ratio in the binary mixture. In order to determine the column kinetic parameters, three different column kinetic models, namely Adams–Bohart, Bed Depth Service Time (BDST), and Yoon–Nelson models were fitted to the dynamic flow experimental data. The BDST model showed good agreement with the experimental results at all the process parameters studied. Results suggest that this novel approach of simultaneous utilization of adsorbents can be adopted for the treatment of dye-bearing effluents.     

固体吸附剂控制燃煤重金属排放的实验研究

在滴管炉上进行了烟煤添加固体吸附剂的燃烧实验研究了硫酸钙、石灰石、铝土矿3种吸附剂对重金属元素Pb、Cd、Cu、Co、Ni排放的控制,并采用形态逐级提取法,将排放颗粒物中重金属分为吸附态、离子可交换态、碳酸盐结合态、硫酸盐结合态和残渣态从粗粒灰渣及细微粒子中重金属元素含量的分布和细微粒子中残渣态稳定形态含量增加2个方面说明添加吸附剂对煤中重金属的排放具有一定的捕获力.对不同的重金属,由于吸附剂本身物理化学特性的差异,所表现出的吸附能力也各不相同.硫酸钙对Pb、Cd、Cu的排放有控制作用;石灰石对Pb、Cd、Cu、Nj的排放有控制作用;铝土矿对5种重金属元素的排放都有控制作用吸附剂粒径越小,对重金属的吸附效果越好.