利用农业副产物制作低成本吸附材料的研究现状与展望

将农业副产物制作成高效的低成本生物吸附剂,用于污染水体的净化处理,具有广阔的应用前景.这一方面为资源化利用农业副产物提供了一条新途径,另一方面为水体净化提供了新的低成本吸附材料.鉴于此,近年来基于农业副产物的低成本生物吸附剂得到大量研究.该研究综述了近年来基于农业副产物的低成本吸附剂运用于废水净化处理的研究现状,着重分析了基于农业副产物的原始生物吸附材料、采用化学修饰处理农业副产物和采用物理技术处理农业副产物3种制作方法,总结了该类研究面临的问题,并对将来的研究方向进行了展望.     

硝酸铈改性赤泥制备除磷吸附剂

用六水硝酸铈改性赤泥并处理含磷废水.实验结果表明:当硝酸铈质量分数为0.45％、焙烧温度为500℃时,制备的吸附剂的吸附性能最好;用该吸附剂处理含磷废水,当初始废水pH为3、振荡时间为80 min时,废水TP去除率约为95％,废水中磷质量浓度为0.41 mg/L,达到GBI8918-2002《城镇污水处理厂污染物排放标准》中的一级标准.该吸附剂的吸附过程符合Langmuir吸附模型.     

煤矸石的改性及其对稀土生产废水中氨氮的吸附

采用热改性、盐酸改性、硫酸改性、碱改性的方法分别制备了4种改性煤矸石吸附剂,研究了吸附工艺条件对4种改性煤矸石吸附剂对稀土生产废水中氨氮去除效果的影响以及吸附机理.实验结果表明:4种改性煤矸石吸附剂吸附氨氮的最佳工艺条件为:吸附剂加入量0.02 g/mL,振荡时间2.5 h,废水pH 7～8;4种吸附剂氨氮去除率大小顺序为:碱改性煤矸石＞硫酸改性煤矸石＞盐酸改性煤矸石＞热改性煤矸石;碱改性煤矸石的氨氮去除率最高,为59.19％;碱改性煤矸石吸附剂对含氨废水中氨氮的吸附较好地符合Langmuir方程和Freundlich方程,在一定程度上符合Temkin方程.     

Removal of fluoride from water using titanium-based adsorbents

Three adsorbents including TiO₂, Ti-Ce, and Ti-La hybrid oxides were prepared to remove fluoride from aqueous solution. The Ti-Ce and Ti-La hybrid adsorbents obtained by the hydrolysis-precipitation method had much higher sorption capacity for fluoride than the TiO₂ adsorbent prepared through hydrolysis. Rare earth (Ce and La) oxides and TiO₂ exhibited a synergistic effect in the hybrid adsorbents for fluoride sorption. The sorption equilibrium of fluoride on the three adsorbents was achieved within 4 h, and the pseudo-second-order model described the sorption kinetics well. The sorption isotherms fitted the Langmuir model well, and the adsorption capacities of fluoride on the Ti-Ce and Ti-La adsorbents were about 9.6 and 15.1 mg·g^-1, respectively, at the equilibrium fluoride concentration of 1.0 mg·L^-1, much higher than the 1.7 mg·g^-1 on the TiO₂. The sorption capacities of fluoride on the three adsorbents decreased significantly when the solution pH increased from 3 to 9.5. The electrostatic interaction played an important role in fluoride removal by the three adsorbents, and Fourier transform infrared (FTIR) analysis indicated that the hydroxyl groups on the adsorbent surface were involved in fluoride adsorption.     

Large-scale effects on resistivity index of porous media

The estimation of humidity in the unsaturated zone of soils and NAPL saturation in contaminated aquifers may be based on the interpretation of electrical resistivity index logs. In the present work, concepts of the theory of the two-phase flow in pore networks are employed to interpret the form of the equilibrium and dynamic resistivity index curves of large porous samples. A resistivity cell is constructed to measure the capillary and electrical properties of large samples of unconsolidated porous media. The drainage capillary pressure and resistivity index curves of a sand column are measured by using the micropore membrane (porous plate) method, where a 0.5% wt/vol NaCl aqueous solution is displaced by n-dodecane. The dynamic resistivity index curves are measured by using the continuous injection technique for various orientations of the sand column. Based on concepts of the two-phase flow theory, concerning the dominant displacement growth pattern in a pore network and arising from the cooperative effects of capillary, buoyancy, and viscous forces, approximate relationships are developed for the resistivity index and saturation exponent as functions of the water saturation. The saturation exponent decreases as the displacement advances and the fluid distribution across the sand column tends to be homogenized after oil breakthrough. Both the resistivity index and saturation exponent increase as the displacement pattern tends to become compact and stable. In the destabilized flow pattern, as the Bond number decreases, the resistivity index may increase respectably within a narrow range of values of the Bond number. This happens when the thickness of the unstable capillary finger exceeds the lateral dimension of the porous sample and becomes a fractal percolation cluster. The saturation exponent becomes almost constant and independent of water saturation only over the destabilized displacement pattern at high values of the Bond number.     

膨润土-白云石复合吸附剂对Fe2+和Mn2+的吸附性能

针对煤矿排出的大量含重金属离子的酸性矿山废水污染问题,采用自制膨润土-白云石复合颗粒吸附剂对含Fe2+和Mn2+的酸性矿山废水进行吸附试验研究。结果表明:膨润土-白云石复合颗粒吸附剂释放总碱度达118.39mg/g(以CaCO3计),可中和酸性矿山废水;随着废水中Fe2+和Mn2+浓度增加,膨润土复合颗粒吸附剂的吸附量在不断增加,且大于原膨润土颗粒吸附剂;建立了膨润土复合颗粒吸附剂对Fe2+和Mn2+的吸附等温式和吸附动力学方程式:膨润土复合颗粒吸附剂对Fe2+的吸附符合BET吸附,对Mn2+的吸附符合Freundlich吸附,对Fe2+、Mn2+的吸附动力学均符合准二级动力学。膨润土-白云石复合颗粒吸附剂既能释放碱度、又对Fe2+和Mn2+具有优良的吸附性能,可作为处理含重金属离子酸性矿山废水的绿色环保矿物材料应用于实际。     

粉煤灰基多孔材料负载纳米铁的制备及其对龙胆紫的去除效果

为制备新型可再生吸附反应材料,以工业废弃物粉煤灰、棕榈壳等为主要原料,烧结制备FAP（粉煤灰基多孔材料）,并以FAP为载体负载纳米零价铁,制备FAP/nZVI（粉煤灰基纳米零价铁多孔材料）,以散失率、龙胆紫去除率、纳米零价铁负载量等为指标,确定FAP及FAP/nZVI的最佳制备条件,并考察二者对染料龙胆紫的去除特性.结果表明:① FAP的最佳制备条件为m（粉煤灰）:m（膨润土）:m（棕榈壳）=190:95:15,升温速率10℃/min,烧结温度800℃,保温时间30 min.② FAP/nZVI最佳制备条件为m（Fe）/m（FAP）1:3,振荡时间1 h,选用抗坏血酸为稳定剂,过程中无需使用惰性气体;SEM结果表明纳米零价铁被成功负载于FAP上.③ FAP/nZVI对200 mg/L龙胆紫的去除率为94.8%,FAP同条件下的去除率仅为26.2%,FAP/nZVI对龙胆紫的去除同时存在物理吸附和化学还原作用,并且纳米零价铁的还原占主导作用.④ FAP/nZVI再生10次后30 min内对100 mg/L龙胆紫去除率高达97.6%.研究显示,FAP可将纳米零价铁氧化产物Fe2+固定在表面,经还原后可再生为纳米零价铁,具有良好的再生性能.      

壳聚糖/二氧化钛复合物的制备与吸附研究

通过溶胶-凝胶法制备了有序多孔的TiO_2材料。通过共混、反相悬浮、交联制备了壳聚糖/二氧化钛(CHS/TiO_2)复合材料,研究了制备材料的吸附性能。结果显示,复合材料的吸附性能优于TiO_2和壳聚糖的吸附性能。比表面积(BET)分析表明,复合材料的比表面积稍大于TiO_2的比表面积,且所制备的材料为介孔分布材料。     

狼尾草根系分泌物对黑土吸附阿特拉津的影响研究

采用批量平衡试验方法,研究狼尾草根系分泌物对黑土吸附阿特拉津的影响.结果用Evolich方程(R2>0.97)和准二级动力学模型(R2>0.99)进行拟合,两者都表现出较好拟合度.用Langmuir和Freundlich等温吸附方程描述土壤吸附阿特拉津的过程,其中,Freundlich方程拟合结果较好(R2>0.91),而Langmuir方程中R2<0.60,加入狼尾草根系分泌物后,吸附平衡常数Kf明显减小,参数1/n增大到1左右,属于较难吸附,表明狼尾草根系分泌物对阿特拉津可能有抑制作用,且根系分泌物浓度不同,影响程度不同.     

水溶液中磷的吸附与预测模型

用红壤和水滑石作为吸附剂,进行了水溶液中磷的等温吸附试验,目的是研究吸附剂(W)0效应和起始吸附质浓度(C)0效应对经典方程参数变异的影响,分析经典Langmuir和Freundlich方程在液/固离子吸附体系中的适用性和验证新吸附模型的预测精确度。试验结果显示,红壤和水滑石在吸附磷的过程中存在明显的吸附剂和吸附质浓度效应,单一的经典方程仅适用于给定吸附剂或吸附质浓度的体系,因此,用其参数来表征不同吸附剂的吸附能力或描述不同吸附剂或吸附质浓度水平上的吸附规律具有一定的局限性。数据分析表明,单位吸附剂的平衡吸附量qe不唯一由初始浓度C0或液相平衡浓度Ce所决定,而是C0/W0或Ce/W0的函数,新吸附预测模型能较好的反映红壤和水滑石磷吸附的总体趋势。新的预测模型用来描述红壤和水滑石的磷吸附曲线时具有较高的精确度。在实践中,新模型可用来预测给定条件下磷的吸附量和所需吸附剂的用量。