大气汞形态测定中吸附剂的选择及性能

本文选择了上试-402树脂作为常温高效选择性吸附氯化甲基汞的吸附剂,改进了Cbromosorb W-SE30-HCl吸附剂管的制备方法,并同时组装了一套由微孔纤维滤膜与Chromosorb W-SE30-HCl、402树脂、螺旋银丝、镀金细砂等四种吸附管串联组成的采样系统,由小型采样机抽气采样,于常温下同时依次富集颗粒汞、氯化汞、氯化甲基汞、单质汞及二甲基汞,系统小型轻便,适于野外采样。采样后,四种吸附剂分别采用高低两种温度脱汞。上述五种形态汞均由装有高温石英原子化器的AAs定量测定。     

NKA-Ⅱ型大孔吸附树脂处理苯胺废水的研究

针对苯胺废水的特点,利用NKA-Ⅱ大孔吸附树脂进行处理,研究了苯胺废水质量浓度、pH值、温度和流速等因素对大孔吸附树脂动态吸附-脱附性能的影响,并得到了最佳工艺条件。实验结果表明在最佳工艺条件下,苯胺去除率>99%,COD>98%,出水苯胺的质量浓度<40mg·L-1,COD出水的质量浓度<100mg·L-1,树脂的平均脱附率值接近99.7%。在废水得到有效处理的同时,苯胺资源也得到了回收,达到了废水治理与资源化的效果。     

Optimizing process parameters for the adsorption of phosphorus from synthetic wastewater on coconut shell based activated carbon

Activated carbon was prepared from coconut shell, an agricultural waste, for the removal of phosphorus from synthetic phosphorus‐containing wastewater. The activated carbon obtained from the coconut shell was characterized using Fourier‐transform infrared (FTIR) spectroscopy. Batch mode experiments were conducted to study the effects of pH, particle size, adsorbent dosage, and sorption time on the adsorptive potential of the prepared activated carbon. Response surface methodology was employed to study the interactions among the variables and to optimize the process conditions for the maximum removal of phosphorus using the coconut shell–based activated carbon (CNS). The characterization results from the FTIR showed the presence of variety of functional groups, such as ?OH, ?NH, C=O, C?H, C?N, CH₃, and CH₂, which explains the CNS's improved adsorption behavior on the colloidal particles. A maximum performance of 95.22% was obtained for CNS at the optimum conditions of adsorbent dosage = 1,000 milligrams (local variable), pH 2 (local variable), particle size = 0.2 millimeters (local variable), and sorption time = 4.2 hours (global variable).     

石墨烯类材料在水处理和地下水修复中的应用

作为一种性质优异的吸附材料,石墨烯类材料对有机物和重金属等多种水污染物均有出色的吸附能力,因此其在水处理和地下水修复工作中的应用前景在近几年备受关注.当前的研究总体上尚停留在实验室模拟阶段,在提高材料饱和吸附量的同时,研制出低成本、稳定性强、易于再生利用且环境友好的石墨烯类材料是今后的发展趋势.本文对石墨烯类材料的种类及制备方法进行了归纳总结,对他们在水处理和地下水修复中的应用研究情况进行了综述,对当前研究中存在的问题进行了分析,最后对未来的研究和应用前景进行了总结和展望.     

阳离子聚丙烯酰胺复配钠基膨润土处理模拟苯酚废水

将阳离子聚丙烯酰胺与钠基膨润土进行复配,制备出复合吸附剂,并将其用于模拟苯酚废水的处理。采用XRD和FTIR技术对复配前后的钠基膨润土进行了表征。表征结果显示:阳离子聚丙烯酰胺附着在钠基膨润土的表面,对钠基膨润土的表面具有改性作用,使其由亲水性变为疏水性。实验结果表明:在阳离子聚丙烯酰胺与钠基膨润土的复配比例为200 mg/g、反应时间为40 min、复合吸附剂投加量为6 g/L、废水p H为11的最佳条件下,于25℃处理苯酚质量浓度为50 mg/L的模拟苯酚废水,苯酚去除率达89.5%。     

The velocity of DNAPL fingering in water-saturated porous media: laboratory experiments and a mobile–immobile–zone model

Dense nonaqueous phase liquids (DNAPLs) are immiscible with water and can give rise to highly fingered fluid distributions when infiltrating through water-saturated porous media. In this paper, a conceptual mobile–immobile–zone (MIZ) model is presented to describe the structure of a DNAPL finger in water-saturated porous media and the velocity of finger propagation. A finger is composed of a finger body and a tip. The finger body has a mobile core and an immobile sheath. All the DNAPL within the tip of a finger is mobile. Lab experiments utilizing image analyses of a DNAPL (PCE) penetrating into water-saturated homogeneous glass beads were carried out in a two-dimensional transparent chamber. The results show that the fingers elongated almost linearly with time. The fingers did not grow laterally after the tip of the finger had passed. The average finger diameters were between 3.9 and 5.4 mm for PCE propagation in water-saturated glass bead porous media with mean particle diameters from 0.32 to 1.36 mm. The estimated mobile core diameters were 51–60% of the average finger diameters.     

淀粉/凹凸棒粘土复合吸附絮凝材料的研究

采用接枝聚合法在硅烷化凹凸棒粘土(OATP)表面接枝淀粉,制备淀粉/凹凸棒粘土(ATP)复合吸附絮凝材料.采用傅里叶变换红外光谱(FT-IR)、扫描电子显微镜(SEM)对淀粉/ATP进行了表征,并对其制备条件进行了优化.结果表明,当淀粉质量分数(相对OATP质量)为100%,聚合反应时间为3 h,引发剂质量分数为0.003%,反应温度为60℃时,制备的淀粉/ATP对镉离子的最大吸附容量可达到36.78 mg/g.与ATP、OATP相比,淀粉/ATP对镉离子的吸附容量增大了2倍以上.复合材料具有比OATP更强的捕获能力,所形成的絮凝体大而密实,比淀粉絮凝剂具有更好的沉降性能.     

Synergistic suppression effects of flame retardant,porous minerals and nitrogen on premixed methane/air explosion

A novel composite inhibitor based on porous mineral materials and conventional flame retardant of ammonium polyphosphate (APP) is prepared to suppress the premixed methane/air explosion. Taking advantages of gas and powder inhibitor, N₂ and the prepared composite inhibitor are combined to use. The suppression performance of N₂-composite inhibitor on methane explosion is investigated on a 20-L spherical experimental explosion apparatus and the characteristic pressure data are obtained. The combined inhibition effects of N₂ and the prepared composite inhibitor are greater than either acting alone. Thermal decomposition behavior and gaseous products of composite inhibitor are analyzed with thermogravimetric analysis and thermogravimetric-mass spectrometry, respectively. Based on physical and chemical actions, the inhibition mechanisms of N₂-composite inhibitor system are proposed. This work provides a reference to prepare high-performance gas explosion inhibitor based on the synergism of binary or multiple components.     

介孔材料在水处理中的应用

介孔材料由于具有一系列独特的性质,如较高比表面积、较大且连续可调的孔径等,使其在化工、医药、环境保护、纳米功能材料等领域得到了广泛的研究和应用。本文从介孔材料作为吸附剂和催化剂两个方面综述了其在水处理中的应用,并对应用中存在的问题和前景作了分析。