发达国家禁用（或限用）含磷洗衣粉措施

在有关文献的基础上，分析世界主要发达国家实施禁用（或限用）含磷洗衣粉措施的背景状况及所取得的效果，提出禁用（或限用）含磷洗衣粉不是解决水体富营养化问题的唯一途径，应根据各地实际情况选择“禁磷”，兴建三级污水处理设施和实施湖区生态恢复工程等综合治理措施。     

Combining product engineering and inherent safety to improve the powder impregnation process

The functionalization of nonwoven textiles can be realized by dry powder impregnation. In order to develop and improve this process, two complementary approaches have been combined: product engineering and inherent safety. It consists in integrating ab-initio consumers' requirements, production constraints as well as safety and environmental considerations. This case study is focused on the proposal, the characterization and the selection of powders mixtures of flame retardants and copolyesters, which will be used to create fire-proofed textiles. The influences of the chemical natures of the flame retardant (e.g. calcium carbonate, aluminium trihydroxide, ammonium polyphosphates), their respective concentrations, particle diameters and the addition of silica to flame retardant/polymer mixtures on their minimum ignition energy has been investigated. It has been determined that ammonium polyphosphates are far more efficient than other flame-retardants and that a minimum of 20%wt. concentration is needed to generate a powder mixture that will be almost insensitive to ignition by an electrostatic source. Modifying the particle size distribution and introducing glidants play also a significant role on flame retardant/polymer interactions, on powder dispersibility and has a strong impact on the minimum ignition energy. Finally, the formulations which have been selected fulfill the requirements for fire resistance, flowability, prevention of dust explosion; they are non-toxic, environmentally friendly and their cost is reduced.     

高压水射流超细粉碎云母的实验研究

利用前混合磨料射流的工作原理，进行了高压水射流超细粉碎云母的实验研究。实验结果表明：喷嘴对云母有粉碎作用，喷嘴直径可以小于云母给料粒度；压力是影响高压水射流超细粉碎效果的最重要参数，在压力为１０—５０ＭＰａ范围内，细粒度产率随压力增加呈直线上升；给料粒度越小，粉碎产品中细粒度的产率越高；水射流超细粉碎在淹没状态下比在非淹没状态下粉碎效果好；高压水射流超细粉碎云母粉，不但能够满足珠光云母粉的细度要求，而且能够保护云母的片状结构和晶面光泽度；高压水射流超细粉碎技术是一种较实用的超细粉碎云母技术。     

用粉煤灰及贮灰场系统处理化纤和棉浆造纸污水

研究了利用粉煤灰及贮灰场系统大规模处理化纤和棉浆造纸污水,试验结果表明,这一方法可行的。对污水中COD,BOD_5、Zn、SS的去除率分别可达69.0％、81.7％、93.7％和51.3％。     

Recycling of Malaysia’s electric arc furnace (EAF) slag waste into heavy-duty green ceramic tile

Recently, various solid wastes from industry such as glass waste, fly ash, sewage sludge and slag have been recycled into various value-added products such as ceramic tile. The conventional solutions of dumping the wastes in landfills or incineration, including in Malaysia are getting obsolete as the annual huge amount of the solid wastes would boost-up disposal cost and may cause permanent damage to the flora and fauna. This recent waste recycling approach is much better and greener as it can resolve problems associated with over-limit storage of industrial wastes and reduce exploration of natural resources for ceramic tile to continuously sustain the nature. Therefore, in this project, an attempt was made to recycle electric arc furnace (EAF) slag waste, obtained from Malaysia’s steel making industry, into ceramic tile via conventional powder compaction method. The research work was divided into two stages. The first stage was to evaluate the suitability of EAF slag in ceramic tile by varying weight percentage of EAF slag (40 wt.%, 50 wt.% and 60 wt.%) and ball clay (40 wt.%, 50 wt.% and 60 wt.%), with no addition of silica and potash feldspar. In the second stage, the weight percentage of EAF slag was fixed at 40 wt.% and the percentage of ball clay (30 wt.% and 40 wt.%), feldspar (10 wt.% and 20 wt.%) and silica (10 wt.% and 20 wt.%) added was varied accordingly. Results obtained show that as weight percentage of EAF slag increased up to 60 wt.%, the percentage of apparent porosity and water absorption also rose, with a reduction in tile flexural strength and increased porosity. On the other hand, limiting the weight percentage of EAF slag to 40 wt.% while increasing the weight percentage of ball clay led to a higher total percentage of anorthite and wollastonite minerals, resulting in higher flexural strength. It was found that introduction of silica and feldspar further improved the flexural strength due to optimization of densification process. The highest flexural strength, lowest apparent porosity and water absorption of EAF slag based tile was attained at the composition of 40 wt.% EAF slag – 30 wt.% ball clay – 10 wt.% feldspar – 20 wt.% silica. The properties of ceramic tile made with EAF slag waste (up to 40 wt.%), especially flexural strength are comparable to those of commercial ceramic tile and are, therefore, suitable as high flexural strength and heavy-duty green ceramic floor tile. Continuous development is currently underway to improve the properties of tile so that this recycling approach could be one of the potential effective, efficient and sustainable solutions in sustaining our nature.     

Photo-oxidation of NO using an exterior paint--screening of various commercial titania in powder pressed and paint films

The present work aims to evaluate the photocatalytic activity of photo-TiO(2) from various producers (Evonik, Kemira, Kronos, Millennium, Sachtleben and Tayca), in the form of powder pressed films and upon incorporation in a water-based paint, for outdoor NO abatement. The photocatalytic activity of the different samples was evaluated in terms of NO conversion and selectivity towards nitrite and nitrate ions following approximately the ISO 22197-1:2007(E) standard. The highest yields obtained for powder pressed films were achieved with VLP7000 (0.70), followed by VLP7101 (0.55) and UVLP7500 (0.55), all from Kronos. On the other hand, when incorporated in paint films, the highest yields were obtained with PC500 and PC105 from Millennium and UV100 from Sachtleben (ca. 0.15). The paint matrix plays an important role on the photocatalytic activity. In particular, the time for steady state is one or two orders of magnitude higher when the photocatalysts are incorporated in paint films in relation to the powder pressed films. The paint films were activated following the procedure recommended by the above-mentioned standard. However, the photocatalytic activity of films incorporating P25 (Evonik) was displayed only when higher power radiation and higher humidity conditions were used. This allowed for similar levels of photocatalytic activity as the other paint films.     

INSTREAM FLOW REQUIREMENTS IN THE POWDER RIVER COAL BASIN1

ABSTRACT: As coal resources are developed in the Northern Great Plains regions, new reservoirs are being considered to meet expanding water demands. The amount of water available for industrial diversion, however, could be limited by regulations that require minimum flow levels to be maintained downstream of the reservoir sites. Computer simulations of potential reservoirs were used to determine to what extent, if any, instream flow requirements might limit the ability of reservoirs to deliver industrial water supplies. Data on instream flow requirements, potential reservoir sites, and historic runoff were input for the simulation of the Powder River Region of Montana and Wyoming. Results of the simulations compared the maximum amount of water available for industrial diversion with and without requiring instream flow criteria.     

大面积镜面电火花加工的实验研究

介绍了大面积镜面电火花加工法现状.通过改变混粉工作液中微粉的种类、浓度、加工参数以及加工面积进行了工艺试验.验证了混粉电火花加工的确能改善表面粗糙度.     

味精生产废水综合治理及资源化

本文提出采用化学絮凝、沉降方法除去味精发酵醪液菌体,清液采用浓缩—连续等电点法提取谷氨酸。采用新工艺后,菌体可回收作蛋白饲料,谷氨酸提取率由现在的75%—78%提高至85%,废水量减少一半以上,采用蒸发浓缩处理,回收作有机复合肥,根本解决了味精废水污染环境的问题。      

Invasive species and coal bed methane development in the Powder River Basin, Wyoming

One of the fastest growing areas of natural gas production is coal bed methane (CBM) due to the large monetary returns and increased demand for energy from consumers. The Powder River Basin, Wyoming is one of the most rapidly expanding areas of CBM development with projections of the establishment of up to 50,000 wells. CBM disturbances may make the native ecosystem more susceptible to invasion by non-native species, but there are few studies that have been conducted on the environmental impacts of this type of resource extraction. To evaluate the potential effects of CBM development on native plant species distribution and patterns of non-native plant invasion, 36 modified Forest Inventory and Analysis plots (each comprised of four 168-m² subplots) were established in the Powder River Basin, Wyoming. There were 73 168-m² subplots on control sites; 42 subplots on secondary disturbances; 14 on major surface disturbances; eight on well pads; and seven on sites downslope of CBM wells water discharge points. Native plant species cover ranged from 39.5 ± 2.7% (mean ± 1 SE) in the secondary disturbance subplots to 17.7 ± 7.5% in the pad subplots. Non-native plant species cover ranged from 31.0 ± 8.4% in the discharge areas to 14.7 ± 8.9% in the pad subplots. The control subplots had significantly less non-native species richness than the combined disturbance types. The combined disturbance subplots had significantly greater soil salinity than the control sites. These results suggest that CBM development and associated disturbances may facilitate the establishment of non-native plants. Future research and management decisions should consider the accumulative landscape-scale effects of CBM development on preserving native plant diversity.