高岭土负载纳米Fe/Ni同时去除水中Cu2+和NO3-

工业废水常含有不同污染物如重金属离子和无机阴离子,而如何有效去除复合污染物就成为环境科学前沿研究的挑战性课题.这些污染物因化学性质不同而导致去除机理和途径也不同.本文采用合成高岭土负载纳米双金属Fe/Ni(K-Fe/Ni)同步去除水中Cu2+和NO-3.结果表明K-Fe/Ni能有效去除水中Cu2+和NO-3,但它们的去除效果却会相互受到影响.在Cu2+浓度为200mg·L-1时,NO-3的去除率达到42.5%;而未加入Cu2+时,NO-3的去除率仅有26.9%,说明Cu2+的存在提高了NO-3降解效率.同样,水中NO-3的存在也影响Cu2+的去除(Cu2+去除率从99.7%降到96.5%).但NO-3浓度对去除Cu2+的影响小于Cu2+浓度对NO-3的影响.通过BET比表面积、X射线衍射(XRD)、扫描电镜(SEM)、X射线能量散射(EDS)和X射线光电分析(XPS)对K-Fe/Ni表征的结果显示,反应后K-Fe/Ni的表面存在铁的氧化物、Ni0和被还原的Cu0.基于以上结果,我们发现K-Fe/Ni同步去除水中Cu2+和NO-3的机理是:高岭土负载下的纳米Fe0作为还原剂,在Ni0的催化产氢作用下将Cu2+还原成Cu0并沉积在K-Fe/Ni上而形成纳米Fe/Ni/Cu三金属催化剂,从而加速催化水中NO-3降解.     

呼和浩特市可镇污水处理厂工程设计

呼和浩特市可镇污水处理厂近期建设规模1.0×104m3/d,远期总规模2.5×104m3/d。污水处理主体工艺采用组合式A2/O生化池+砂滤,污泥处理采用污泥贮池+带式浓缩脱水一体机,尾水采用液氯消毒,设计出水水质执行GB 18918—2002《城镇污水处理厂污染物排放标准》一级A排放标准。介绍了该工程的工艺流程、设计参数,总结分析了工艺设计的技术特点。同时阐述了针对低温条件下的运行保障措施和要求,为寒冷地区同类污水处理厂的设计提供参考和借鉴。     

沉积物中雌激素及壬基酚、辛基酚、双酚A的测定

近些年来雌激素及烷基酚类化合物由于其对水生生物的内分泌干扰作用越来越受到广泛关注.沉积物作为环境中有机污染物的重要储存库,研究目标物在其中的浓度分布对于探明此类物质在环境中的迁移转化具有重要意义.但沉积物中基质组成复杂而雌激素又痕量存在,这增加了前处理的难度.本研究从雌激素及烷基酚类化合物的理化性质入手,采用碱液提取、液液萃取和LC-MS/MS分析测定沉积物样品中的雌激素及壬基酚、辛基酚、双酚A.结果表明,经过优化的方法对7种目标物的回收率介于61.9%～93.7%之间.该方法能有效去除沉积物中那些不溶于强碱和既溶于酸又溶于碱的有机污染物,同时操作简单、成本低,但回收率高、检出限低,可广泛适用于河流沉积物样品及土壤样品的前处理.     

单光子/光电子在线质谱实时分析聚氯乙烯热分解/燃烧产物

实验室研制了低能光电子磁场增强电离(MEPEI)和单光子电离(SPI)复合电离源,该电离源具有电离化合物范围宽、碎片离子少、质谱图简单等优点,结合飞行时间质谱(TOF-MS)实现了聚氯乙烯(PVC)热分解/燃烧产物的在线分析.针对不同的目标化合物,MEPEI/SPI复合电离源通过调节电离区电场强度,可以快速在SPI和SPI-MEPEI之间切换.PVC热分解/燃烧产物中电离能大于光子能量(10.60 eV)的HCl和CO2(12.74 eV、13.77 eV)利用MEPEI模式电离;而烯烃、二氯乙烯、苯系物、氯苯、苯乙烯、茚满及萘系物等可通过SPI-MEPEI复合模式电离.通过实时监测PVC主要燃烧产物的信号强度随温度的变化趋势可推断出,PVC燃烧产物主要是通过两种机制生成:①250～370℃时,PVC发生脱氯及分子内环化反应,产生大量的HCl、苯和萘;②380～510℃时,PVC发生分子间交联反应,生成烷基芳烃,如甲苯和二甲苯/乙苯等.实验结果表明,SPI/SPI-MEPEI复合离子源TOF-MS分析速度快,应用范围广,在在线分析中具有广泛的应用前景.     

Electrochemical treatment of olive mill wastewater: Treatment extent and effluent phenolic compounds monitoring using some uncommon analytical tools

Problems related with industrials effluents can be divided in two parts: (1) their toxicity associated to their chemical content which should be removed before discharging the wastewater into the receptor media; (2) and the second part is linked to the difficulties of pollution characterisation and monitoring caused by the complexity of these matrixes. This investigation deals with these two aspects, an electrochemical treatment method of an olive mill wastewater (OMW) under platinized expanded titanium electrodes using a modified Grignard reactor for toxicity removal as well as the exploration of the use of some specific analytical tools to monitor effluent phenolic compounds elimination. The results showed that electrochemical oxidation is able to remove/mitigate the OMW pollution. Indeed, 87% of OMW color was removed and all aromatic compounds were disappeared from the solution by anodic oxidation. Moreover, 55% of the chemical oxygen demand (COD) and the total organic carbon (TOC) were reduced. On the other hand, UV- Visible spectrophotometry, Gaz chromatography/mass spectrometry, cyclic voltammetry and 13 C Nuclear Magnetic Resonance (NMR) showed that the used treatment seems efficaciously to eliminate phenolic compounds from OMW. It was concluded that electrochemical oxidation in a modified Grignard reactor is a promising process for the destruction of all phenolic compounds present in OMW. Among the monitoring analytical tools applied, cyclic voltammetry and 13 C NMR are among the techniques that are introduced for the first time to control the advancement of the OMW treatment and gave a close insight on polyphenols disappearance.     

废弃SCR脱硝催化剂的再生及其脱硝性能研究

对废弃脱硝催化剂处理后重新加工再生,研究了添加剂对其粉体成型和再生催化剂脱硝活性的影响,探讨了反应温度、空速、n(NH3)∶n(NO)摩尔比、氧含量、H2O和SO2对再生催化剂NH3选择性催化还原(SCR)NO的影响。结果表明:最佳再生条件是使用5%羧甲基纤维素和10%无机粘结剂辅助成型;废弃催化剂再生利用率高达90%;再生催化剂抗压强度为4.73 MPa,优于商用催化剂;空速5 000 h-1、氨氮摩尔比1、氧含量6%时,脱硝活性温度窗口为310⁴50℃,350℃时活性最高为94%;350℃时,单独通入1 000×10-6SO2或10%H2O对再生催化剂活性均有一定抑制作用,最低活性分别为70%和81%,停止通入SO2或H2O后其活性逐渐恢复;同时通入1 000×10-6SO2和10%H2O,再生催化剂活性下降至63%并于1 h内保持相对稳定,停止通入SO2和H2O 2 h后,活性逐渐恢复到73%。     

不同材质对催化裂化装置催化剂粉尘粘附性能的试验研究

在三座DN150 mmX1600 mm有机玻璃塔试验装置上,考察了DN15的塑料拉西环、陶瓷拉西环和不锈钢拉西环三种材质填料对催化剂的粘附能力。在催化剂浓度5‰,液相负荷40 L/h,气相负荷80 m3/h的条件下,经过408h的连续运转,结果表明不同材质填料对催化剂的粘附能力均存在饱和状态,粘附在填料上的催化剂不随时间的持续增加而增多。其中,塑料填料对催化剂的粘附能力最强,增重0.125kg;不锈钢填料次之,增重为0.115kg;陶瓷填料最弱,增重为0.055kg。可为相关领域的工业应用提供借鉴和数据支撑。     

Formic acid as an alternative reducing agent for the catalytic nitrate reduction in aqueous media

Formic acid was used for the nitrate reduction as a reductant in the presence of Pd:Cu/γ-alumina catalysts. The surface characteristics of the bimetallic catalyst synthesized by wet impregnation were investigated by SEM, TEM-EDS. The metals were not distributed homogeneously on the surface of catalyst, although the total contents of both metals in particles agreed well with the theoretical values. Formic acid decomposition on the catalyst surface, its influence on solution pH and nitrate removal efficacy was investigated. The best removal of nitrate (50 ppm) was obtained under the condition of 0.75 g/L catalyst with Pd:Cu ratio (4:1) and two fold excess of formic acid. Formic acid decay patterns resembled those of nitrate removal, showing a linear relationship between kf (formic acid decay) and k (nitrate removal). Negligible amount of ammonia was detected, and no nitrite was detected, possibly due to buffering effect of bicarbonate that is in situ produced by the decomposition of formic acid, and due to the sustained release of H2 gas.     

基于阳离子树脂的Fenton非均相催化剂制备及性能测试

采用阳离子交换树脂颗粒为催化剂载体采用浸渍法负载二价铁离子,制备出非均相Fenton反应催化剂,并用该非均相Fenton催化剂氧化脱色亚甲基蓝溶液,考察其催化性能。实验结果表明:制备催化剂时最佳FeSO4浓度为16.67 mmol/L,pH=3.0,H2O2初始浓度为46.6 mmol/L,反应时间为30 min的条件下,亚甲基蓝溶液初始浓度为0.028 mmol/L时,亚甲基蓝溶液在非均相Fenton催化氧化过程中,其脱色率可达92.9%。采用序批形式反应使用5次后,该非均相催化剂仍有良好的催化效果,反应30 min后亚甲基蓝溶液脱色率仍可达85.2%,拓宽了Fenton技术的使用范围。     

化学铁盐辅助除磷对生物除磷的影响研究

化学辅助除磷有助于污水厂实现磷达标,但其对生物系统存在潜在的影响。针对除磷药剂对生物除磷过程的影响展开研究,选用硫酸亚铁进行化学辅助除磷。药剂形成的化学污泥干扰生物除磷过程且成分复杂,故以磷酸铁、氢氧化铁模拟化学污泥,由钾离子、K/P摩尔比计算出同步除磷中的生物除磷,来探讨化学污泥对聚磷菌释磷/吸磷过程的影响。结果表明,连续投加硫酸亚铁使聚磷菌的释磷量、吸磷量降低;系统中磷酸铁含量0.075 mmol/L时聚磷菌的释磷和吸磷能力提高了约25%,磷酸铁含量0.15 mmol/L时对聚磷菌吸磷有抑制作用;氢氧化铁对聚磷菌释磷、好氧初期吸磷均有抑制作用。生物污泥与化学污泥存在交互作用。