车用三效催化剂的研究进展

三效催化剂是机外治理机动车尾气污染最常采用的有效方法，车用三效催化剂已发展到第4代。目前车用三效催化剂的研究主要集中在：开发稀燃型三效催化剂和紧耦合三效催化剂及发展三效催化剂低温冷起燃技术等。国内应以稀土添加少量贵金属的三效催化剂为主要研究方向，开发适合我国现状的车用净化催化剂技术。     

INTEGRATING SERVICE‐LEARNING INTO WATERSHED MANAGEMENT PROGRAMS: OPPORTUNITIES AND CHALLENGES1

ABSTRACT: The objective of this article is to open a dialogue on integrating service‐learning into community based watershed management programs and to discuss opportunities and challenges that a service‐learning program presents to universities and communities. The article presents the concept and definition of service‐learning, and arguments concerning why institutions of higher education and university faculty and students should be involved with community based watershed management programs. The article describes a case study for developing a service‐learning program for watershed management at Virginia Tech and discusses lessons learned from the case study. The paper concluded that to make a service‐learning program sustainable, there should be a long term plan, regular and effective communication with the stakeholders, and some incentives for faculty and students for long term commitment to the community based watershed management programs.     

COLD WATER PATCHES IN WARM STREAMS: PHYSICOCHEMICAL CHARACTERISTICS AND THE INFLUENCE OF SHADING1

ABSTRACT: Discrete cold water patches within the surface waters of summer warm streams afford potential thermal refuge for cold water fishes during periods of heat stress. This analysis focused on reach scale heterogeneity in water temperatures as influenced by local influx of cooler subsurface waters. Using field thermal probes and recording thermistors, we identified and characterized cold water patches (at least 3°C colder than ambient streamflow temperatures) potentially serving as thermal refugia for cold water fishes. Among 37 study sites within alluvial valleys of the Grande Ronde basin in northeastern Oregon, we identified cold water patches associated with side channels, alcoves, lateral seeps, and floodplain spring brooks. These types differed with regard to within floodplain position, area, spatial thermal range, substrate, and availability of cover for fish. Experimental shading cooled daily maximum temperatures of surface waters within cold water patches 2 to 4°C, indicating a strong influence of riparian vegetation on the expression of cold water patch thermal characteristics. Strong vertical temperature gradients associated with heating of surface layers of cold water patches exposed to solar radiation, superimposed upon vertical gradients in dissolved oxygen, can partially restrict suitable refuge volumes for stream salmonids within cold water patches.     

IMPLICATIONS OF C.A.R.E. VS. SOUTHVIEW FARM ON THE U.S. LIVESTOCK AND POULTRY INDUSTRY1

ABSTRACT: On May 19, 1993, a jury in the U.S. District Court for the Western District of New York found Southview Farm and Richard H. Popp guilty of violating the Clean Water Act on five occasions. The violations were the result of storm water runoff from a site used for disposal of dairy cattle manure from an unpermitted concentrated animal feeding operation. The presiding District Court judge later dismissed the jury verdict, and subsequently a U.S. Court of Appeals for the Second Circuit reversed the dismissal. The Court of Appeals concluded that the discharges were not exempt as agricultural storm water discharges, and that the manure spreaders involved were point sources. Because the use of animal manures in crop production activities will result, unavoidably, in the discharge of some pollutants to adjacent surface waters, a rational and universally applicable basis is needed to determine when such discharges are point versus nonpoint source. Current statutes and regulations do not delineate clearly such a boundary. To address this lack of specificity, I propose that application rates be based on recommended crop nutrient needs.     

TEMPORAL AND GEOMORPHIC VARIATIONS OF STREAM STABILITY AND MORPHOLOGY: MAHOGANY CREEK,NEVADA1

ABSTRACT: Detailed studies of long-term management impacts on rangeland streams are few because of the cost of obtaining detailed data replicated in time. This study uses government agency aquatic habitat, stream morphologic, and ocular stability data to assess land management impacts over four years on three stream reaches of an important rangeland watershed in northwestern Nevada. Aquatic habitat improved as riparian vegetation reestablished itself with decreased and better controlled livestock grazing. However, sediment from livestock disturbances and road crossings and very low stream flows limited the rate of change. Stream type limited the change of pool variables and width/depth ratio, which are linked to gradient and entrenchment. Coarse woody debris removal due to previous management limited pool recovery. Various critical-element ocular stability estimates represented changes with time and differences among reaches very well. Ocular stability variables tracked the quantitative habitat and morphologic variables well enough to recommend that ocular surveys be used to monitor changes with time between more intensive aquatic surveys.     

INTEGRATED RIVER BASIN OPTIMIZATION: MODELING ECONOMIC AND HYDROLOGIC INTERDEPENDENCE1

ABSTRACT: This paper presents an integrated optimal control model that optimizes economic performance of reservoir management in watersheds in which there are significant economic and hydrologic interdependencies. The model is solved using the General Algebraic Modeling System (GAMS). Results show that application of this model to New Mexico's Rio Chama basin can increase total system benefits over historical benefits by exploiting complementarities between hydroelectricity production, instream recreation, and downstream lake recreation.     

Thermal and mechanical properties of poly(lactic Acid) and poly(ethylene/butylene Succinate) blends

In this study, blends of poly (lactic acid) (PLA) with poly(ethylene/butylene succinate) (Bionolle) have been investigated for their thermal and mechanical properties as a function of the concentration of Bionolle. Differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and tensile tests were used to characterize the blends. From the results of the DMA and DSC, it was found that this blend system was not miscible within the compositions studied. DSC results showed that adding Bionolle aids in crystallization of PLA. It was observed that increasing the Bionolle concentration led to a slight increase in the strain-at-break of the blends but a decrease in the Young’s modulus and ultimate tensile strength. Biaxially oriented films showed an increase in tensile strength, modulus, and strain-at-break.     

Pressure- volume- temperature relationships of soy protein isolate/starch plastic

The use of pressure-volume-temperature (PVT) studies in processing of a biodegradable plastic composition made from soy protein isolate and corn starch is described. The ability of PVT measurements to predict the combined effects of pressure, volume, and temperature effects is demonstrated. The results show that the PVT relations of the plastic can be predicted by using a regression analysis similar to the Tait equations of state. A change in slope of the PVT curves was observed at around 80‡C, which is ascribed to the glass-transition process of the plastic. Evidence of onset of thermal degradation of the plastic was observed at ca. 160‡C under 0 to 200 MPa isobaric pressure. This thermal degradation precluded determination of the crystal melting point of the plastic.     

Mechanical Properties with the Functional Group of Additives for Starch/PVA Blend Film

This paper deals with the mechanical properties and degree of swelling (DS) of starch/PVA blend film with the functional groups i.e., hydroxyl and carboxyl group, of additives. Starch/PVA blend films were prepared by using the mixing process. Glycerol (GL) with 3 hydroxyl group, sorbitol (SO) with 6 hydroxyl group, succinic acid (SA) with 2 carboxyl group, malic acid (MA) with 1 hydroxyl and 2 carboxyl group, tartaric acid (TA) with 2 hydroxyl and 2 carboxyl group and citric acid (CA) with 1 hydroxyl and 3 carboxyl group were used as additives. The results of measured tensile strength (TS) and elongation (%E) verified that both hydroxyl and carboxyl group as a functional groups increased the flexibility and strength of the film. Values of DS for GL-added and SA-added films were low. However, DS values of the films added MA, TA or CA with both hydroxyl and carboxyl group were comparatively high. When the film was dried at low temperature, the properties of the films were evidently improved. The reason is probably because the hydrogen bonding was activated at low temperature.