武汉城市污水中微塑料的分离、鉴定及其微观特征分析

为研究武汉城市污水中微塑料的分布特点及其表面形貌特征,采用以连续浮选分离装置为基础进行改进设计的微塑料提取装置对污水中微塑料进行分离,通过用65%硝酸和30%过氧化氢混合液（体积比为1:3）对污水样品进行消解,并采用筛网（300、600、1 000目）（100目=0.147 mm）和滤膜（1 μm玻璃纤维滤膜和20 nm氧化铝滤膜）分离技术建立起对水体微塑料和纳米塑料的分离富集方法.通过傅里叶变换红外光谱（FTIR）、扫描电镜-X射能谱分析联用（SEM-EDS）等方法对所提取微塑料颗粒的组成成分、赋存特征、表面形貌特征进行分析.结果表明:①提取装置的平均回收率在92%以上.②污水中微塑料类型主要为碎片类、泡沫类、薄膜类和纤维类.③FTIR结果证实,该方法所提取的微塑料颗粒中有聚乙烯、聚丙烯等成分,且发现了羰基、聚酯类物质存在,说明提取到的微塑料中可能有可降解塑料颗粒.④SEM-EDS结果显示,各类微塑料表面粗糙、撕裂程度不同,存在不同程度的风化痕迹,并在其表面发现Si、Cu、O、Al、Na、Ca、Ba等元素的富集.研究显示:改进的微塑料分离方法能够实现对污水中微塑料的高效提取;同时,明确了武汉城市污水微塑料的表面形貌特征及赋存特征,为未来武汉城市污水中微塑料污染的针对性治理提供理论依据.      

ABS树脂装置丁二烯聚合工段废水水质表征

为确定某ABS树脂装置丁二烯聚合工段废水水质,特别是特征有机物种类,采用吹扫捕集、静态顶空、固相萃取、固相微萃取和液液萃取等预处理方法与GC/MS(气相色谱/质谱)联用,定性检测出该工段废水中含有16种挥发、半挥发性有机物,主要包括烯烃、苯系物、有机腈、多环芳烃、醚、醇和胺. 废水ρ(SS)(SS为悬浮物)为540.31 mg/L;SS粒径主要分布在0.10~5.00 μm之间,可吸附水中4.83%~33.21%的对二甲苯、乙苯、苯乙烯和1,5-环辛二烯等有机物. 与生活污水不同,该工段废水三维荧光光谱图的荧光区域集中在λ_Ex/λ_Em(激发波长/发射波长)=205~285 nm/310~360 nm范围内,主要包括λ_Ex/λ_Em为285 nm/350 nm、260 nm/310 nm、225 nm/345 nm、210 nm/315 nm、230 nm/360 nm的5个荧光峰,由甲苯、靛蓝、苯乙烯、脱氢松香酸、芴、菲等苯系物和多环芳烃类有机物引起. 废水在200~250 nm之间有较强紫外吸收峰,主要由1,3-丁二烯、苯甲醛、苯乙酮、4-苯基-1-环己烯等共轭二烯、不饱和醛、酮和苯系物等有机物引起.      

Photoacoustic infrared spectroscopy for conducting gas tracer tests and measuring water saturations in landfills

Gas tracer tests can be used to determine gas flow patterns within landfills, quantify volatile contaminant residence time, and measure water within refuse. While gas chromatography (GC) has been traditionally used to analyze gas tracers in refuse, photoacoustic spectroscopy (PAS) might allow real-time measurements with reduced personnel costs and greater mobility and ease of use. Laboratory and field experiments were conducted to evaluate the efficacy of PAS for conducting gas tracer tests in landfills. Two tracer gases, difluoromethane (DFM) and sulfur hexafluoride (SF₆), were measured with a commercial PAS instrument. Relative measurement errors were invariant with tracer concentration but influenced by background gas: errors were 1-3% in landfill gas but 4-5% in air. Two partitioning gas tracer tests were conducted in an aerobic landfill, and limits of detection (LODs) were 3-4 times larger for DFM with PAS versus GC due to temporal changes in background signals. While higher LODs can be compensated by injecting larger tracer mass, changes in background signals increased the uncertainty in measured water saturations by up to 25% over comparable GC methods. PAS has distinct advantages over GC with respect to personnel costs and ease of use, although for field applications GC analyses of select samples are recommended to quantify instrument interferences.     

温室气体光声光谱检测系统的建立及效果分析

“双碳”目标下,温室气体在线长期稳定监测技术是全面掌握温室气体排放及其环境、气候效应,并预测未来变化趋势的重要保障。为了实时在线监测工业生产现场等环境温室气体浓度及其变化趋势,及时采取相应措施,在分析光声光谱信号产生机理及多组分气体混合监测原理的基础上,根据温室气体的主要成分,分析其吸收光谱特性,基于光声光谱的多组分温室气体的定性和定量监测技术,搭建温室气体光声光谱在线监测实验平台,分析监测器内部噪声和环境温度、湿度等外部影响因素,并通过现场测试,分析试验数据,应用吸附法降低内外部因素的影响。结果表明,对称安装传声器和非共振式光声腔能有效削弱外部噪声对测试结果的影响;空气净化器能降低空气中水蒸气和其他气体对测试结果的影响;低、高浓度混合气体监测结果偏差均小于0.5,与GC测试结果偏差小于10%。应用光声光谱技术的环境温室气体监测技术监测范围宽,选择性好,且监测精度达10^-6,适用于环境温室气体浓度在线监测。     

固体进样-电热蒸发-原子吸收法测定土壤中的镉

采用固体进样原子吸收法直接测定土壤中的镉,可以避免传统酸消解预处理过程耗时长、试剂消耗大、操作步骤繁琐等缺点,提升镉的检测效率。通过优化测镉仪的仪器参数,确定了固体进样-电热蒸发-原子吸收法的优化仪器条件。采用优化条件测定了不同浓度的土壤样品,研究了该方法的检出限、正确度、精密度。研究结果表明:镉质量范围为0~200 ng时与峰面积的线性相关系数优于0.999 5,空气流下优化的灰化温度和热解温度均为800 ℃,优化的热解气体氢气流量为300 mL/min,当样品进样量为0.1 g时,检出限为0.009 mg/kg,7次连续测定相对标准偏差为1.4%~5.0%,加标回收率为96.2%~102.1%,分析时间小于4 min。该方法操作简便,用时短,无需高压气源,可以用于土壤中镉的高效检测。     

大气二氧化硫浓度的光学测定方法

介绍了测定二氧化硫浓度的几种光学方法 ,指出了目前一些化学方法的局限性 ,特别对紫外荧光法的原理、二氧化硫的吸收光谱以及荧光光谱进行分析探讨 ,设计了实验分析系统 ,得出该方法具有操作简单、灵敏度高、可实时在线的智能化优点 ,将会成为今后研究的主导方向。     

Sorption mechanisms of cephapirin, a veterinary antibiotic, onto quartz and feldspar minerals as detected by Raman spectroscopy

Raman spectroscopy was used to investigate sorption mechanisms of cephapirin (CHP), a veterinary antibiotic, onto quartz (SiO₂) and feldspar (KAlSi₃O₈) at different pH. Sorption occurs by electrostatic attraction, monodentate and bidentate complexation. The zwitterion (CHP^o) adsorbs to a quartz⁽⁺⁾ surface by electrostatic attraction of the carboxylate anion group (-COO⁻) at low pH, but adsorbs to a quartz⁽⁻⁾ surface through electrostatic attraction of the pyridinium cation, and possibly COO⁻ bridge complexes, at higher pH. CHP⁻ bonds to quartz⁽⁻⁾ surfaces by bidentate complexation between one oxygen of -COO⁻ and oxygen from carbonyl of an acetoxymethyl group. On a feldspar^(+/−) surface, CHP^o forms monodentate complexes between CO, and possible -COO⁻ bridges and/or electrostatic attachments to localized edge (hydr)oxy-Al surfaces. CHP⁻ adsorbs to feldspar⁽⁻⁾ through monodentate CO complexation. Similar mechanisms may operate for other cephalosporins. Results demonstrate, for the first time, that Raman techniques can be effective for evaluating sorption mechanisms of antibiotics.     

Sedimentology models from activity concentration measurements: application to the “Bay of Cadiz” Natural Park (SW Spain)

A previous study on seabed sediments of the Bay of Cadiz (SW of Spain) enabled us to identify several relations between sedimentological variables and activity concentrations of environmental radionuclides such as ¹³⁷Cs, ²²⁶Ra, ²³²Th and ⁴⁰K. In this paper the study has been extended to a large neighbouring inter-tidal area in order to establish if the above mentioned models can be generalized. As a result we have determined that the measured activity concentrations are closely to the values predicted by the theoretical models (correlation coefficient range = 0.85–0.93).     

Adsorption behavior of condensed phosphate on aluminum hydroxide

Sodium pyrophosphate （pyro-P, Na4P2OT）, sodium tripolyphosphate （tripoly-P, Na3P3O10）, and sodium hexametaphosphate （meta-P, （NaPO3）6） were selected as the model compounds of condensed phosphate to investigate the adsorption behavior of condensed phosphate on aluminum hydroxide. The adsorption was found to be endothermic and divisible into two stages： （1） fast adsorption within 1 h; and （2） slow adsorption between 1 and 24 h. The modified Freundlich model simulated the fast adsorption stage well; the slow adsorption stage was described well by the first-order kinetics. The activation energies of pyro-P, tripoly-P, and meta-P adsorption on aluminum hydroxide were determined to be 20.2, 22.8 and 10.9 kJ/mol P adsorbed, respectively, in the fast adsorption stage and to be 66.3, 53.5 and 72.5 kJ/mol P adsorbed, respectively, in the slow adsorption stage. The adsorption increased the negative charge of the aluminum hydroxide surface. Transmission electron microscopy and energy dispersive X-ray analysis analyses provided evidence that the adsorption was not uniform on the surface and that the small crystals contributed more to the fast adsorption than the normal sites did. The results from X-ray fluorescence spectrometry and X-ray photoelectron spectroscopy tests also revealed the uneven adsorption of condensed phosphate as a function of the penetration depth. More condensed phosphates were adsorbed on the outer surface of aluminum hydroxide than in its inner parts.     

Detection of intermediates in the TiO2-assisted photodegradation of Rhodamine B under visible light irradiation

The photocatalytic degradation of dye Rhodamine B （RhB） in the presence of TiO2 nanostdpe or P25 under visible light irradiation was investigated. The degradation intermediates were identified using Infrared spectra （IR spectra）, ^1H nuclear magnetic resonance （^1HNMR） spectra, and gas chromatography-mass spectroscopy （GC-MS）. The IR and the ^1HNMR results showed that the large conjugated chromophore structure of RhB was efficiently destroyed under visible light irradiation in both the photocatalytic systems （TiO2 nanostfipe or P25 and Rhodamine B systems）. GC-MS results showed that the main identified intermediates were ethanediotic acid, 1,2-benzenedicarboxylic acid, 4-hydroxy benzoic acid and benzoic acid, which were almost the same in the TiO2 nanostdpes and P25 systems. This work provides a good insight into the reaction pathway（s） for the TiO2-assisted photocatalytic degradation of dye pollutants under visible light irradiation.