电极生物膜法在水处理中的研究进展

电极生物膜法在给水和排水处理领域的研究现状和进展 ,认为该工艺是极具发展潜力的水处理方法 ,并对今后开展这方面的研究提出了展望。     

啤酒废水处理站的工程设计

本项目以哈尔滨啤酒(沈阳)有限公司啤酒厂为设计对象,其啤酒废水处理规模为1500m3/d,进水CODCr2000~2800mg/L。采用预处理-预酸化-IC反应器-活性污泥法-过滤为主体工艺,出水达到《辽宁省污水与废气排放标准》(DB21-60-89中一级标准)。为啤酒行业废水综合治理提供了较好的工艺途径。     

Ion exchange membrane-assisted electro-activation of aqueous solutions: Effect of the operating parameters on solutions properties and system electric resistance

The properties of electro-activated (EA) aqueous solutions as well as the dynamics of their changes were considered in the current study using aqueous solutions of NaCl and NaHCO₃. The concentrations of the salt solutions were 0.5, 0.25, 0.125 and 0.05 M. The tests were performed at the DC current densities of 25, 37.5, and 50 Å/m². The electro-activation reactor consisted of three individual cells assembled together and separated by anion-exchange (AEM) and cation-exchange (CEM) membranes. During the experiments, four configurations of the membrane placements and solutions concentrations were studied. The obtained results showed the dynamics of the electro-activation process that allows obtaining electro-activated solutions with targeted properties such as pH and oxydo-reduction potential (ORP). It was possible to obtain electro-activated solutions at the anodic side (acid anolyte) with pH of 3.0, 3.5, and 4.0 and ORP of +1100 ± 15 mV when NaCl solution was used as electrolyte. Furthermore, several types of electro-activated solutions with high redox potential (ORP = +921 ± 12 mV) and neutral pH (6.48 ± 0.05) were obtained on the anode side when sodium carbonate was used. At the same time, two types of solutions, one with acid pH (2.14 ± 0.14) and the other one with alkaline pH (10.46 ± 0.03) with ORP = +689 ± 10 and 110 ± 21 mV, respectively, were obtained in the central compartment which considered as electro-activated solutions obtained by means of noncontact electro-activation.     

Chitosan/albumin/CaCO3 as mimics for membrane bioreactor fouling: genesis of structural mineralized-EPS-building blocks and cake layer compressibility

Membrane bioreactor biofouling is usually described as an extracellular matrix in which biopolymers, inorganic salts and active microbes co-exist. For that reason, biomineralization (BM) models can be useful to describe the spatial organization and environmental constraints within the referred scenario. BM arguments were utilized as background in order to (1) evaluate CaCO₃ influence on flux decline; pore blocking and cake layer properties (resistance, permeability and compressibility) in a wide range of Chitosan/Bovine serum albumin (BSA) mixtures during step-pressure runs and, (2) perform membrane autopsies in order to explore the genesis of mineralized extracellular building blocks (MEBB) during cake layer build up. Using low molecular weight chitosan (LC) and BSA, 2 L of 5 LC/BSA mixtures (0.25-1.85 ratio) were pumped to an external ultra filtration (UF) membrane (23.5 cm², hydrophobic, piezoelectric, 100 kDa as molecular weight cut-off). Eight different pressure steps (40 ± 7 to 540 ± 21 kPa) were applied. Each pressure step was held for 900 s. CaCO₃ was added to LC/BSA mixtures at 0.5, 1.5 and 3 mM in order to create MEBB during the filtration tests. Membrane autopsies were performed after the filtration tests using thermo gravimetric, scanning microscopy and specific membrane mass (mg cm⁻²) analyses. Biopolymer-CaCO₃ step-pressure filtration created compressible cake layers (with inner voids). The formation of an internal skeleton of MEBB may contribute to irreversible fouling consolidation. A hypothesis for MEBB genesis and development was set forth.     

Isolation and characterization of lead-tolerant Ochrobactrum intermedium and its role in enhancing lead accumulation by Eucalyptus camaldulensis

In this study, the potential of rhizospheric bacteria in promoting the growth and Pb accumulation by the woody plant Eucalyptus camaldulensis under hydroponic conditions was investigated for the first time. Three Pb-tolerant bacteria were isolated from the rhizosphere of E. camaldulensis grown in Pb-contaminated soils in the Bo Ngam Pb mine, Thailand. Based on analysis of partial 16S rRNA gene sequence, the three isolates were identified as Microbacterium paraoxydans BN-2, Ochrobactrum intermedium BN-3, and Bacillus fusiformis BN-4. Among these strains, O. intermedium BN-3 showed the highest tolerance to not only Pb but also Cd and Zn. After growth in the presence of Pb, the membranes of O. intermedium BN-3 cells exhibited an increase in unsaturated fatty acid levels but a decrease in fluidity. In hydroponic studies, inoculation of O. intermedium BN-3 significantly increased the biomass and Pb accumulation by E. camaldulensis compared to the uninoculated control. The results suggested the role of the natural rhizospheric bacteria localized to the root surface of E. camaldulensis in promoting Pb accumulation and plant growth. Our results indicate that O. intermedium BN-3 and other indigenous rhizospheric bacteria have the potential to improve the efficiency of phytoremediation of Pb-contaminated sites.     

Risks of using membrane filtration for trace metal analysis and assessing the dissolved metal fraction of aqueous media--a study on zinc, copper and nickel

Membrane filtration is commonly performed for solid-liquid separation of aqueous solutions prior to trace metal analysis and when assessing “dissolved” metal fractions. Potential artifacts induced by filtration such as contamination and/or adsorption of metals within the membrane have been investigated for different membrane materials, metals, applied pressures and pre-cleaning steps. Measurements have been conducted on aqueous solutions including well-defined metal standards, ultrapure water, and on runoff water from corroded samples.Filtration using both non-cleaned and pre-cleaned filters revealed contamination and adsorption effects, in particular pronounced for zinc, evident for copper but non-significant for nickel. The results clearly show these artifacts to be non-systematic both for non-cleaned and pre-cleaned membranes. The applied pressure was of minor importance.Measurements of the labile fraction by means of stripping voltammetry clearly elucidate that membrane filtration followed by total metal analysis cannot accurately assess the labile or the dissolved metal fraction.     

控制系统在污水处理中的应用

介绍了污水控制系统的工艺流程、系统配置和软件设计，并对由PLC和上位机组成的自动控制系统的主要功能进行了说明。上位机通过组态软件设计承担监控和管理任务，下位机通过编程软件实现实时数据采集和自动控制功能。     

膜分离技术处理电镀废水的实验研究

采用纳滤＋反渗透2级处理系统浓缩回收电镀铜漂洗废水。实验结果显示：在△P=1．5MPa条件下进行浓缩．纳滤膜可以使料液浓缩近10倍。纳滤膜对Cu^2＋的截留率在96％以上，对COD的截留率在57％以上。在△P=3．0MPa条件下进行浓缩，反渗透膜可以使料液浓缩近10倍。反渗透膜对Cu^2＋的截留率在98％以上，对COD的截留率在67％以上。随着料液浓度的增加，纳滤膜和反渗透膜的截留率会降低。     

Closing the water cycle for industrial laundries: An operational performance and techno-economic evaluation of a full-scale membrane bioreactor system

To reduce the consumption of freshwater in the laundry industry, a new trend of closing the water cycle has resulted in the reuse/recycling of water. In this study, the performance of a full-scale submerged aerobic membrane bioreactor (9 m³) used to treat/reuse industrial laundry wastewater was examined over a period of 288 days. The turbidity and total solids (TS) were reduced by 99%, and the chemical oxygen demand (COD) effluent removal efficiencies were between 70% and 99%. The levels of COD removed by the membrane were significantly greater than the levels of biodegraded COD. This enabled the bioreactor to sustain COD levels that were below 100 mg/L, even during periods of low wastewater biodegradation due to bioreactor sludge. An economic evaluation of the membrane bioreactor (MBR) system showed a savings of 1.13 € per 1 m³ of water. The payback period for this system is approximately 6 years. The energy and maintenance costs represent only 5% of the total cost of the MBR system.     

Penicillin fermentation residue biochar as a high-performance electrode for membrane capacitive deionization

● We have provided an activated method to remove the toxicity of antibiotic residue. ● PFRB can greatly improve the salt adsorption capacity of MCDI. ● The hierarchical porous and abundant O/N-doped played the key role for the high-capacity desalination. ● A new field of reuse of penicillin fermentation residue has been developed. Membrane capacitive deionization (MCDI) is an efficient desalination technology for brine. Penicillin fermentation residue biochar (PFRB) possesses a hierarchical porous and O/N-doped structure which could serve as a high-capacity desalination electrode in the MCDI system. Under optimal conditions (electrode weight, voltage, and concentration) and a carbonization temperature of 700 °C, the maximum salt adsorption capacity of the electrode can reach 26.4 mg/g, which is higher than that of most carbon electrodes. Furthermore, the electrochemical properties of the PFRB electrode were characterized through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) with a maximum specific capacitance of 212.18 F/g. Finally, biotoxicity tests have showed that PFRB was non-biotoxin against luminescent bacteria and the MCDI system with the PFRB electrode remained stable even after 27 adsorption–desorption cycles. This study provides a novel way to recycle penicillin residue and an electrode that can achieve excellent desalination.