pH对铝盐絮凝剂形态分布与混凝除氟性能的影响

对比研究了AlC13和3种不同碱化度的聚合氯化铝(PACl)在不同pH与投量下除氟效果,并对不同形态铝盐除氟机理进行了初步探讨.结果表明,pH对絮凝剂水解后铝形态分布及其除氟效果有重要影响.pH 5 ～6时,Al3+和Al2、Al3等低聚态铝为AlCl3主要形态,且AlCl3更易水解生成可将溶解态氟转化为颗粒态氟的Al(OH)3,从而较PACl具有更佳除氟效果.pH ＞7时,PACl较AlCl3具有更佳除氟效果,且增大PACl碱化度可促进氟的去除,这主要是由于具有较高Al13含量的PACl更容易与电负性F-结合所致;且絮凝剂混凝除氟絮体ζ电位越高,越利于F-在絮体表面吸附.     

预腐蚀条件下不同孔数冷挤压强化7075-T6铝合金板件疲劳寿命退化规律

目的 研究腐蚀环境下单孔和多孔冷挤压强化铝合金板件的疲劳寿命退化规律和损伤机理。方法 针对2种不同孔距的三孔冷挤压强化7075-T6铝合金板件,采用模拟热带海洋大气环境的实验室加速腐蚀谱,开展不同腐蚀时间下的预腐蚀疲劳试验。结果 获得了3倍孔距的三孔挤压强化铝板以及单孔挤压强化铝板的C(t)曲线、疲劳S-N曲线和损伤形貌特征,分析了腐蚀后挤压强化试件的腐蚀机理及挤压强化作用。同时,将不同孔数试件的试验结果进行比较,探明了孔数对挤压强化铝板腐蚀和疲劳性能的影响。结论 腐蚀后挤压强化铝合金板件的疲劳性能发生显著退化,腐蚀损伤主要为剥蚀,疲劳裂纹萌生位置由孔边转移至表面。挤压孔数量对挤压强化铝合金板件的疲劳和腐蚀疲劳性能的影响较小。     

铝合金化学氧化膜盐雾试验后腐蚀点评定方法研究

目的 制定飞机用2024铝合金表面阿洛丁1200S化学氧化膜盐雾试验后腐蚀点的评定依据.方法 通过开展铝合金化学氧化膜盐雾试验,分别利用目视、SEM微观、能谱分析和电化学阻抗测试等手段,表征盐雾试验后的腐蚀形貌及特征.结果 试验后样品表面出现的典型腐蚀特征尺寸大于或等于0.15 mm时,正常视力的检测人员均能目视可见....     

A conceptual approach to selection of a control measure for residual chlorine discharge in Kuwait bay

It is estimated that some 17 metric tons of residual oxidants (chlorine) are discharged into the enclosed coastal seawater of Kuwait on a daily basis from power-desalination plants alone. Alarmed by the unlimited number of reported cases of damage to marine aquatic systems due to chlorine discharge around the world, several alternatives were proposed to control such a massive discharge of residual oxidant into seawaters. Most of the proposed alternatives lacked the basic criteria necessary for their evaluation, justification, and then selection. The objective of this article is to provide a conceptual approach that can be used to select a control measure for residual oxidant discharge in Kuwait coastal seawaters. This approach is based on state-of-the-art knowledge and the unique operational and environmental factors involved. A matrix system was designed whereby the cost of residual chlorine control alternative, its effectiveness, and environmental and public health impact, performance, and reliability in Kuwait can be compared and evaluated. The selection approach considered currently operating power plants in terms of their engineering design and material (cast iron or steel condensers), current operational conditions, operator's perception, acceptability, and projected problems associated with the environmental management of proposed modifications. The proposed approach revealed that in Kuwait, conventinal chlorination was marginally superseded only by chlorination/dechlorination using SO₂ and operation alteration using process optimization. The overall cost-effective assessment matrix classified other alternatives as worse than chlorination by various degrees. Ozone and UV were found to be the worst and the least desirable alternatives for biofouling control of seawater in Kuwait. In light of the available information on the consequences of the Gulf War on the marine environment, and the potential formation of additional halogenated organic compounds through the reaction of residual chlorine with the released petroleum hydrocarbons, it is essential to control residual chlorine discharged into the nearshore environment of Kuwait.     

地铁型材模具的探讨

介绍了大型铝型材的特点 ,大型铝型材模具的设计 ,分流比的选择 ,分流孔位置的布置 ,芯头颈部的选择 ,工作带的确定以及加工中的注意事项     

酸性溶液中铝-氟反应动力学

研究了酸性溶液中铝氟反应的动力学，结果表明，铝氟之间的反应速率随温度和ｐＨ的升高而增加．低ｐＨ下以Ａｌ３＋＋Ｆ－＝ＡｌＦ２＋反应为主，较高ｐＨ下由于ＡｌＯＨ２＋参与反应及ＯＨ－的催化作用，反应速率加快．在铝的浓度比氟过量１０倍的情况下，铝氟之间的反应可以用一级反应动力学方程来拟合，即为假一级反应．当ｐＨ＜３８时，柠檬酸和草酸的存在使反应速度加快，而当ｐＨ＞３８时，有机酸使铝氟反应速度变慢．有机酸在不同的ｐＨ下存在不同的作用机制．     

Effects of simulated acid rain on cation releasing in soils of South China

ＥｆｅｃｔｓｏｆｓｉｍｕｌａｔｅｄａｃｉｄｒａｉｎｏｎｃａｔｉｏｎｒｅｌｅａｓｉｎｇｉｎｓｏｉｌｓｏｆＳｏｕｔｈＣｈｉｎａＷｕＱｉｎｇ，ＱｉｕＲｏｎｇｌｉａｎｇ，ＬｕＹｕｅｎａＤｅｐａｒｔｍｅｎｔｏｆＥｎｖｉｒｏｎｍｅｎｔａｌＳｃｉｅｎｃｅ，Ｚ...     

一种研究絮凝过程的新方法——透光脉动检测技术

采取电解法制备聚合絮凝剂可望通过控制过程的电化学与溶液化学条件，克服化学法制备中的缺陷，以获取最优的絮凝剂形态和效果。极化是影响电解制备的最主要问题之一。它将产生过电位，增加电解槽压，降低电流效率。     

包套轧制复合法制备TA1/LY12复合板

对5座高山电视塔在自然环境下金属腐蚀与防护进行了调查和分析研究，寻求其规律性，以便在今后建设中有针对性地改进抗蚀措施，提高并延长其结构使用寿命，更好地为广播电视宣传服务。     

7A04和2A97在典型气候环境中的性能演变规律研究

目的 研究湿热海洋、湿热雨林、暖湿酸雨典型气候环境对7A04和2A97铝合金性能的影响.方法 通过对7A04和2A97铝合金试样进行户外暴露试验,结合外观形貌观察、力学性能检测、化学成分分析等手段,研究7A04和2A97在典型气候环境中的性能演变规律.结果 对于7A04铝合金,经过2 a的湿热海洋气候环境试验后,表面出现均匀腐蚀,抗拉强度、伸长率下降,硬度无变化;经过2 a的湿热雨林气候环境试验后,外观形貌、抗拉强度、硬度无变化,伸长率下降;经过2 a的暖湿酸雨气候环境试验后,表面出现点蚀,抗拉强度、硬度无变化,伸长率下降.对于2A97铝合金,经过2 a的湿热海洋气候环境试验后,表面由点蚀发展为局部腐蚀,抗拉强度、伸长率下降,硬度无变化;经过2 a的湿热雨林气候环境试验后,外观形貌、抗拉强度、伸长率、硬度无变化;经过2 a的暖湿酸雨环境试验后,外观形貌、硬度无变化,抗拉强度、伸长率下降.结论 湿热海洋和暖湿酸雨气候环境对7A04和2A97易造成腐蚀,而湿热雨林气候环境对7A04和2A97不易造成腐蚀,2A97的耐蚀性优于7A04.